Dahua HD Recessed Mount Dome Network Camera Quick Start Manual

Dahua HD Recessed Mount Dome Network Camera Quick Start Guide

Dahua HD Recessed Mount Dome Network Camera

Quick Start Guide

Version 1.0.0

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Dahua HD Recessed Mount Dome Network Camera Quick Start Guide

i

Welcome

Thank you for purchasing our network cameras.
This user’s manual is designed to be a reference tool for using your product.
Please read the following safeguards and warnings carefully before you use this series product.
Please keep this user’s manual well for future reference.

Important Safeguards and Warnings

Electrical safety

 All installation and operation should conform to your local electrical safety codes.
 The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard, and supply power with voltage rated by DC 12 V or AC 24 V according to the Limited
Power Source requirement of IEC60950-1. Please note that the power supply requirement is
subject to the device label.

 Make sure the power supply is correct before operating the device.
 A readily accessible disconnect device shall be incorporated in the building installation wiring
 Prevent the power cable from being trampled or pressed, especially the plug, power socket and the

junction extruded from the device.

 We assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

Environment

 Do not aim the device at strong light to focus, such as lamp light and sun light, otherwise it might

cause over brightness or light marks, which are not the device malfunction, and affect the longevity
of Charge Coupled Device (CCD) or Complementary Metal-Oxide Semiconductor (CMOS).

 Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or the

locations with strong electromagnetic radiation or unstable lighting.

 Keep the camera away from water or other liquid to avoid damages to the internal components.
 Keep the indoor device away from rain or damp to avoid fire or lightning.
 Keep sound ventilation to avoid heat accumulation.
 Transport, use and store the device within the range of allowed humidity and temperature.
 Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

 Pack the device with standard factory packaging or the equivalent material when transporting the

device.

Operation and Daily Maintenance

 Do not directly touch the heat dissipation component of the device to avoid scald.

Dahua HD Recessed Mount Dome Network Camera Quick Start Guide

ii

 Do not dismantle the device because there is no component that can be fixed by users themselves.

Otherwise, it might cause water leakage or bad image due to unprofessional dismantling.

 Please contact after-sale service to replace desiccant when it becomes green.
 It is recommended to use the device together with lightning arrester to improve lightning protection

effect.

 It is recommended to get the grounding holes to be grounded to enhance the reliability of the

device.

 Do not directly touch the optic component CCD or CMOS. You can use the air blower to blow away

the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust
gently if necessary.

 Use the dry soft cloth to clean the device. If the dust is difficult to be removed, please wipe it away

with a clean cloth wetted slightly by the mild detergent, and then use the dry cloth to clean the
device. Do not use volatile solvents like alcohol, benzene, thinner, or strong detergent with
abrasiveness, otherwise it will damage the surface coating or reduce the working performance of
the device.

 When installing or using the device, do not directly touch or wipe the surface of the dome cover

because it is an optical device. If stained with dirt, use oil-free soft brush or air blower to gently
wipe it away. If stained with grease or fingerprint, use soft cloth to gently wipe the water drop or oil
and wait till it is dry, and then use oil-free cotton cloth or lens cleaning paper soaked with alcohol or
detergent to wipe from the lens center outward till it is clean.

 We are not liable for any problems caused by unauthorized modification or attempted repair.

Warnings

 Please modify the default password after login to avoid being stolen.
 Use the standard components provided by manufacturer and make sure the device is installed and

fixed by professional engineers.

 The surface of the image sensor should not be exposed to laser beam radiation in an environment

where a laser beam device is used.

 Do not provide two or more power supply sources for the device, otherwise it might damage the

device.

Disclaimer

 This manual is for reference only. Please refer to the actual product for more details.
 Minor differences might be found in user interface, and there might be deviation between the actual

value of some data and the value provided in the manual due to the reasons such as the real
environment is not stable. Please refer to the final explanation of the company if there is any doubt
or dispute.

 All the designs and software are subject to change without prior written notice. The manual will be

regularly updated according to the product upgrade without prior announcement.

 Please contact the supplier or customer service if there is any problem occurred when using the

device.

 Please contact the customer service for the latest procedure and supplementary documentation.
 Please visit our website or contact your local service engineer for more information.

Dahua HD Recessed Mount Dome Network Camera Quick Start Guide

iii

 The company is not liable for any loss caused by the operation that does not comply with the

manual.

 If there is any uncertainty or controversy, please refer to our final explanation.

Regulatory Information

FCC Information

1.1 FCC conditions：

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

 This device may not cause harmful interference
 This device must accept any interference received, including interference that may cause

undesired operation.

1.2 FCC compliance：

This equipment has been tested and found to comply with the limits for a digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference. This equipment generate, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Note

 Please refer to the disk for more details, check and download the corresponding user’s manual and

tool.

 Before installation, please open the package and check all the components are included.
 Contact your local retailer as soon as possible if something is broken in your package.

Component list

Quantity

Network Camera Unit

1

Quick Start Guide

1

Installation Accessories Bag

1

CD

1