Dahua HD IR Vari-Focal Bullet Network Camera User Manual

Dahua HD IR Vari-focal Bullet Network Camera Quick Start Guide

Dahua HD IR Vari-Focal Bullet Network Camera

Quick Start Guide

Version 1.0.0

Zhejiang Dahua Vision Technology Co., LTD

Dahua HD IR Vari-focal Bullet Network Camera Quick Start Guide

i

Welcome

Thank you for purchasing our Network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．Electrical safety

 All installation and operation here should conform to your local electrical safety codes.
 Please check if the power supply is correct before operating the device.
 The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the

Limited power source is rated DC 12V or AC 24V in the IEC60950-1. (Power supply requirement is
subject to the device label).

 Please install easy-to-use device for power off before installing wiring, which is for emergent power

off when necessary.

 Please prevent the line cord from being trampled or pressed, especially the plug, power socket and

the junction from the device.

 Note: Do not connect these two power supplying sources to the device at the same time; it

may result in device damage!

 We assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

 We are not liable for any problems caused by unauthorized modification or attempted repair.

2．Environment

 Please don’t aim the device at strong light (such as lighting, sunlight and so on) to focus; otherwise

it may cause overexposure (It is not the device malfunction), which will affect the longevity of CCD
or CMOS.

 Please transport, use and store the device within the range of allowed humidity and temperature.
 Please don’t keep the device in a place which is wet, dusty, extremely hot, and extremely cold and

with strong electromagnetic radiation or unstable lighting.

 Please do not allow water and other liquid falling into the camera in case that the internal

components are damaged.

 Please do not allow rain or damp to the indoor device in case fire or lightning may occur.
 Please keep the sound ventilation in case of heat accumulation.
 Please pack the device with standard factory packaging or material with same quality when

transporting the device.

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

3. Operation and Daily Maintenance

 Please do not touch the heat dissipation component of the device directly in order to avoid scald.

Dahua HD IR Vari-focal Bullet Network Camera Quick Start Guide

ii

 Please do not dismantle the device; there is no component which can be fixed by users themselves

in the machine. It may cause water leakage or bad image for the device due to unprofessional
dismantling. Please contact after-sale service to replace desiccant if it becomes green.

 It is recommended to use the device with thunder proof device in order to improve thunder proof

effect.

 The grounding holes of the product are recommended to be grounded to further enhance the

reliability of the camera.

 Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean the dust

or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust gently if
it is necessary to clean.

 Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to

dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean
the device. Don’t use volatile solvent like alcohol, benzene, thinner and etc or strong detergent with
abrasiveness, otherwise it will damage the surface coating or reduce the working performance of
the device.

 Dome cover is an optical device, please don’t touch or wipe cover surface directly during

installation and use, please refer to the following methods to deal with once dirt is found:

 Stained with dirt
 Use oil-free soft brush or hair dries to remove it gently.
 Stained with grease or fingerprint
 Use soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton cloth or

paper soaked with alcohol or detergent to wipe from the lens center to outward. It is ok to change
the cloth and wipe several times if it is not clean enough.

Warning

 Please modify the default password after login in order to avoid being stolen.
 Please use the standard accessories provided by manufacturer and make sure the device is

installed and fixed by professional engineers.

 Please prevent the device surface from the radiation of laser beam when using laser beam device.
 Please do not provide two or more power supply modes for the device, otherwise it may cause

damage to the device.

Statement

 Please refer to the actual product for more details; the manual is just for reference.
 The manual will be regularly upgraded according to the product update; the upgraded content will

be added in the manual without prior announcement.

 Please contact the supplier or customer service if there is any problem occurred when using the

device.

 Please contact the customer service for the latest procedure and supplementary documentation.

Dahua HD IR Vari-focal Bullet Network Camera Quick Start Guide

iii

Accessory Name

Amount

Network Camera Unit

1

Quick Start Guide

1

Installation Accessory Bag

1

CD

1

 There may be deviation between the actual value of some data and the value provided in the

manual due to the reasons such as the real environment is not stable and so on. Please refer to
the company’s final explanation if there is any doubt or dispute.

 The company is not liable for any loss caused by the operation which is not followed by the manual.

FCC Information

1. FCC conditions：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

 This device may not cause harmful interference;
 This device must accept any interference received, including interference that may cause

undesired operation.

2. FCC compliance：
This equipment has been tested and found to comply with the limits for a digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Note:

Please refer to the disk for more details, check and download corresponding user’s manual and tool.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.

Dahua HD IR Vari-focal Bullet Network Camera Quick Start Guide

iv

Table of Contents

1 Framework ................................................................................................................................... 1

1.1 Device External Cable ................................................................................................. 1

1.2 Framework and Dimension ......................................................................................... 2

1.3 Bidirectional Talk .......................................................................................................... 3

1.4 Alarm Setup ................................................................................................................... 3

2 Device Installation ...................................................................................................................... 6

3 Network Configuration ............................................................................................................. 10

3.1 Modify IP Address ...................................................................................................... 10

3.2 Login WEB Interface .................................................................................................. 12

Dahua HD IR Vari-focal Bullet Network Camera Quick Start Guide

1

SN

Port

Port Name

Connection

Note

1

LAN

Network port

Ethernet
port

Connect to standard Ethernet cable.

2

DC 12V

Power input
port

-

Power port. Input DC 12V.

1 Framework

1.1 Device External Cable

Note:

 The following figure is for reference only, which is used to know the functions of cable port.
 The cable structure may be different according to different devices, please refer to the actual

device for more details.

You can refer to the following figure for device external cable information. See Figure 1-1.

Figure 1-1

Please refer to the following sheet for detailed information.