Dahua HD Cube Network Camera Quick Start Manual
Dahua HD Cube Network Camera Quick Start Guide
Dahua HD Cube Network Camera Quick Start Guide
Version 1.0.1
Dahua HD Cube Network Camera Quick Start Guide
i
Welcome
Thank you for purchasing our network camera!
This quick start guide is designed to be a reference tool for your system.
Please keep this start guide well for future reference.
Please open the accessory bag to check the items one by one in accordance with the list below.
Contact your local retailer ASAP if something is missing or damaged in the bag.
Before your operation please read the following instructions carefully.
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC in the IEC60950-1. This series product supports PoE too. Please note:
Do not connect these two power supplying sources to the device at the same time; it may result
in device damage! The product must be grounded to reduce the risk of electronic shock.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series network camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Dahua HD Cube Network Camera Quick Start Guide
ii
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name
Amount
Network Camera
1
Quick Start Guide
1
Installation Accessories Bag
1
CD 1 Warranty Card and Certificate
1
Dahua HD Cube Network Camera Quick Start Guide
iii
Table of Contents
1 Framework ................................................................................................................................... 1
1.1 Device Components ..................................................................................................... 1
1.2 Dimensions .................................................................................................................... 3
1.3 Bidirectional talk............................................................................................................ 3
1.3.1 Device-end to PC-end .......................................................................................... 3
1.3.2 PC-end to the Device-end .................................................................................... 3
1.4 Alarm .............................................................................................................................. 4
2 Device Installation ...................................................................................................................... 6
3 Quick Configuration Tool ........................................................................................................... 8
3.1 Overview ........................................................................................................................ 8
3.2 Operation ....................................................................................................................... 8
4 Web Operation .......................................................................................................................... 10
4.1 Network Connection ................................................................................................... 10
4.2 Login and Main Interface ........................................................................................... 10
Appendix Toxic or Hazardous Materials or Elements ............................................................... 12
Dahua HD Cube Network Camera Quick Start Guide
1
1 Framework
1.1 Device Components
You can refer to the following figure for component information. See Figure 1-1.
Figure 1-1 Component
Please refer to the following sheet for detailed information.
SN
Port Name
Indicator
Connector
Note
1
Power indicator
light
POWER
/
Green light on: System boots
up.
Green light flashed (frequency=
0.5s).
System upgrade
Alarm
Wireless alarm study
(optional, supports by
some model only)
Green light flashes
(frequency=1s): Arming delay
(optional, supports by some
model only)
2
Network
indicator light
NET
/
Wire network connection-Red
light is on.
Wireless network connection-
Green light is on.
Loading...