How it Works
Dahua
Loading...
HCVR5216A-S2
User Manual
252 pgs7.77 Mb0

Dahua HCVR5208L-V2, HCVR5204A-S2, HCVR7208A-S2, HCVR5204L-V2, HCVR5216L-V2 User Manual

...
Dahua HDCVI Standalone DVR User’s Manual
Dahua HDCVI Standalone DVR User’s Manual
V1.0.0
i
Table of Contents
1 FEATURES AND SPECIFICATIONS ....................................................... 1
1.1 Overview ............................................................................................................................. 1
1.2 Features ................................................................ .............................................................. 1
1.3 Specifications ..................................................................................................................... 2
1.3.1 HCVR52XXA-V2 Series ................................................................................................ 2
1.3.2 HCVR72XXA-V2 Series ................................................................................................ 4
1.3.3 HCVR52XXL-V2 Series ................................................................................................ 5
1.3.4 HCVR54XXL-V2 Series ................................................................................................ 6
1.3.5 HCVR58XXS-V2 Series ................................................................................................ 8
2 OVERVIEW AND CONTROLS ............................................................... 10
2.1 Front Panel ....................................................................................................................... 10
2.1.1 HCVR52XXA-V2/ HCVR72XXA-V2 Series................................................................ 10
2.1.2 HCVR52XXL-V2/ HCVR54XXL-V2 Series ................................................................ 12
2.1.3 HCVR58XXS-V2 Series .............................................................................................. 13
2.2 Rear Panel ........................................................................................................................ 16
2.2.1 HCVR52XXA-V2/ HCVR72XXA-V2 Series................................................................ 16
2.2.2 HCVR52XXL-V2/ HCVR54XXL-V2 Series ................................................................ 17
2.2.3 HCVR58XXS-V2 Series .............................................................................................. 20
2.3 Connection Sample .......................................................................................................... 23
2.3.1 HCVR52XXA-V2/ HCVR72XXA-V2 Series................................................................ 23
2.3.2 HCVR52XXL-V2/ HCVR54XXL-V2 Series ................................................................ 23
2.3.3 HCVR58XXS-V2 Series .............................................................................................. 24
2.4 Remote Control ................................................................................................................ 25
2.5 Mouse Control .................................................................................................................. 27
ii
2.6 Virtual Keyboard & Front Panel....................................................................................... 29
2.6.1 Virtual Keyboard .......................................................................................................... 29
2.6.2 Front Panel ................................................................................................................... 29
3 INSTALLATION AND CONNECTIONS .................................................. 30
3.1 Check Unpacked DVR ..................................................................................................... 30
3.2 About Front Panel and Real Panel ................................ ................................................. 30
3.3 HDD Installation ............................................................................................................... 30
3.3.1 HCVR52XXA-V2/ HCVR72XXA-V2 Series................................................................ 30
3.3.2 HCVR52XXL-V2/ HCVR54XXL-V2 Series ................................................................ 31
3.3.3 HCVR58XXS-V2 Series .............................................................................................. 32
3.3.4 Rack Installation .......................................................................................................... 32
3.4 Connecting Power Supply ............................................................................................... 33
3.5 Connecting Video Input and Output Devices ................................................................. 33
3.5.1 Connecting Video Input ............................................................................................... 33
3.5.2 Connecting Video Output ............................................................................................ 33
3.6 Connecting Audio Input & Output, Bidirectional Audio .................................................. 34
3.6.1 Audio Input ................................................................................................................... 34
3.6.2 Audio Output ................................................................................................................ 34
3.7 Alarm Input and Output Connection ............................................................................... 34
3.7.1 Alarm Input and Output Details .................................................................................. 35
3.7.2 Alarm Input Port ........................................................................................................... 36
3.7.3 Alarm Output Port ........................................................................................................ 36
3.8 RS485 ................................................................................................ ............................... 37
3.9 Other Interfaces ................................................................................................................ 37
iii
4 OVERVIEW OF NAVIGATION AND CONTROLS .................................. 38
4.1 Boot up and Shutdown .................................................................................................... 38
4.1.1 Boot up ......................................................................................................................... 38
4.1.2 Shutdown ..................................................................................................................... 38
4.1.3 Auto Resume after Power Failure .............................................................................. 38
4.1.4 Replace Button Battery ............................................................................................... 38
4.2 Startup Wizard .................................................................................................................. 39
4.3 Manual Record ................................................................................................................. 42
4.3.1 Live Viewing ................................................................................................................. 42
4.4 Right-Click Menu ................................ .............................................................................. 44
4.4.1 Window Switch ............................................................................................................. 45
4.4.2 PTZ Control .................................................................................................................. 45
4.4.3 Color ................................................................................................ ............................. 51
4.4.4 Search .......................................................................................................................... 53
4.4.5 Record Control ............................................................................................................. 53
4.4.6 Alarm Output ................................................................................................................ 53
4.4.7 Remote Device ................................ ............................................................................ 53
4.5 Navigation Bar .................................................................................................................. 53
4.5.1 Main Menu.................................................................................................................... 53
4.5.2 Output Screen .............................................................................................................. 53
4.5.3 Favorites ....................................................................................................................... 53
4.5.4 Tour .............................................................................................................................. 54
4.5.5 PTZ ............................................................................................................................... 54
4.5.6 Color ................................................................................................ ............................. 54
4.5.7 Search .......................................................................................................................... 54
4.5.8 Alarm Status ................................................................................................................. 54
4.5.9 Channel Info ................................................................................................................. 54
4.5.10 Remote Device ........................................................................................................ 55
4.5.11 Network .................................................................................................................... 55
4.5.12 HDD Manager.......................................................................................................... 55
4.5.13 USB Manager ................................ .......................................................................... 55
4.6 USB Device Auto Pop-up ................................................................................................ 55
iv
4.7 Main Menu ........................................................................................................................ 56
4.8 Operation .......................................................................................................................... 56
4.8.1 Search .......................................................................................................................... 56
4.8.2 Backup .......................................................................................................................... 64
4.8.3 Shut Down .................................................................................................................... 66
4.9 Information ........................................................................................................................ 66
4.9.1 System Info .................................................................................................................. 66
4.9.2 Event............................................................................................................................. 70
4.9.3 Network ........................................................................................................................ 71
4.9.4 Log ................................................................................................................................ 73
4.10 Setting ............................................................................................................................... 75
4.10.1 Camera ................................................................ .................................................... 75
4.10.2 Network .................................................................................................................... 85
4.10.3 Event ...................................................................................................................... 103
4.10.4 Storage .................................................................................................................. 117
4.10.5 System ................................................................................................................... 130
5 WEB OPERATION ............................................................................... 151
5.1 Network Connection ....................................................................................................... 151
5.2 Login................................................................................................................................ 151
5.3 LAN Mode ....................................................................................................................... 152
5.4 Real-time Monitor ........................................................................................................... 154
5.5 PTZ .................................................................................................................................. 155
5.6 Image/Relay-out ............................................................................................................. 156
5.6.1 Image .......................................................................................................................... 156
5.6.2 Relay output ............................................................................................................... 156
v
5.7 WAN Login ...................................................................................................................... 157
5.8 Setup ............................................................................................................................... 158
5.8.1 Camera ....................................................................................................................... 158
5.8.2 Network ...................................................................................................................... 165
5.8.3 Event........................................................................................................................... 181
5.8.4 Storage ....................................................................................................................... 189
5.8.5 Setting ........................................................................................................................ 193
5.9 Information ...................................................................................................................... 207
5.9.1 Version ....................................................................................................................... 207
5.9.2 Log .............................................................................................................................. 207
5.9.3 Online User ................................................................................................................ 208
5.10 Playback ......................................................................................................................... 209
5.11 Alarm ............................................................................................................................... 212
5.12 Log out ............................................................................................................................ 213
5.13 Un-install Web Control ................................................................................................... 214
6 PROFESSIONAL SURVEILLANCE SYSTEM ...................................... 215
7 FAQ ...................................................................................................... 216
APPENDIX A HDD CAPACITY CALCULATION ....................................... 224
APPENDIX B COMPATIBLE BACKUP DEVICES ....................................... 226
Appendix B-1 Compatible USB list .......................................................................................... 226
Appendix B-2 Compatible SD Card list ................................................................................... 227
vi
Appendix B-3 Compatible Portable HDD list .......................................................................... 227
Appendix B-4 Compatible USB DVD List ............................................................................... 227
Appendix B-5 Compatible SATA DVD List .............................................................................. 227
Appendix B-6 Compatible SATA HDD List ............................................................................. 228
APPENDIX C COMPATIBLE CD/DVD BURNER LIST ............................. 232
APPENDIX D COMPATIBLE DISPLAYER LIST ....................................... 233
APPENDIX E COMPATIBLE SWITCHER ................................................... 234
APPENDIX F COMPATIBLE WIRELESS MOUSE LIST ........................... 235
APPENDIX G EARTHING ......................................................................... 236
APPENDIX H TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ...... 242
vii
Welcome
Thank you for purchasing our HDCVI DVR! This user’s manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series hybrid standalone DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully!
viii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.
3．Installation
Keep upwards. Handle with care. Do not apply power to the DVR before completing installation. Do not place objects on the DVR.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc.
6. Accessories
Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury! When replace the battery, please make sure you are using the same model!
1
1 FEATURES AND SPECIFICATIONS
1.1 Overview
The hybrid standalone series DVR is an excellent digital monitor product designed for security field.
It adopts embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality, low bit stream. Unique frame by frame play function is suitable for detailed analysis. It has various functions such as record, playback, monitor at the same time and can guarantee audio video synchronization. This series product has advanced technology and strong network data transmission function.
This series device adopts embedded design to achieve high security and reliability. It can work in the local end, and at the same time, when connecting it to the professional surveillance software (PSS), it can connect to the security network to realize strong network and remote monitor function.
This series product can be widely used in various areas such as banking, telecommunication, electric power, interrogation, transportation, intelligent resident zone, factory, warehouse, resources, and water conservancy.
1.2 Features
This series product has the following features:
Real-time surveillance Support VGA port and HDMI port. Realize the surveillance through displayer. Support HDMI, VGA, and TV output at the same time.
Storage function Special data format to guarantee data security and can remove the risk of the vicious data modification. Support digital watermark.
Compression format Support multiple-channel audio and video. An independent hardware decodes the audio and video signal from each channel to maintain video and audio synchronization.
Backup function Support backup operation via USB port (such as U disk, portable HDD, burner) Client-end user can download the file to local HDD to backup via network.
Record & playback function
2
Support each channel real-time record independently, and at the same time it can support search, forward play, network monitor, record search, download and etc. Support various playback modes: slow play, fast play, backward play and frame by frame play. Support time title overlay so that you can view event accurate occurred time Support customized zoom function during the preview.
Network operation Support network remote real-time monitor, remote record search and remote PTZ control.
Alarm activation function Several relay alarm outputs to realize alarm activation and on-site light control. The alarm input port and output has the protection circuit to guarantee device safety.
Communication port RS485 port can realize alarm input and PTZ control. RS232 port can connect to keyboard to realize central control, and can also connect to PC COM to upgrade system and realize maintenance, and matrix control. Standard Ethernet port can realize network access function. The dual-network port has the multiple-access, fault-tolerance, load-balance setup mode.
PTZ control Support PTZ decoder via RS485.
Intelligent operation Mouse operation function In the menu, support copy and paste setup function
UPNP (Universal Plug and Play) Establish mapping connection between LAN and WAN via UPNP protocol.
Slight function differences may be found due to different series.
1.3 Specifications
1.3.1 HCVR52XXA-V2 Series
Model
Parameters
HCVR5204A-V2
HCVR5208A-V2
HCVR5216A-V2
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
PAL:1~25f/s；NTSC：1~30f/s
3
Model
Parameters
HCVR5204A-V2
HCVR5208A-V2
HCVR5216A-V2
Video Bit Rate
1536Kbps-4096Kbps， For 720P:default value is 2Mbps，max value is 4Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， HDMI/ VGA video output at the same time (VGA/HDMI of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，RCA port, audio via coaxial cable
Audio Output
1-ch，RCA port
Bidirectional Talk Input
Support（Reuse the audio port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm
Alarm Input
4-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
3-ch alarm output
HDD
HDD Port
2 SATA ports. Does not support eSATA port
Space/HDD
4T
Communication Port
Network
1 RJ45 port, 1000Mbps Ethernet port
Communication
RS485 port
USB
2 USB ports
Other
Power
DC12V
Power Consumption
≤30W（exclude HDD）
Working Temperature
-10℃－＋55℃
4
Model
Parameters
HCVR5204A-V2
HCVR5208A-V2
HCVR5216A-V2
Working Humidity
10%~90%
Dimension
1U case，375mm（W）×280mm（D）×50mm（H）
Weight
1.5kg～2.5kg（exclude HDD）
Installation Mode
Desk installation
1.3.2 HCVR72XXA-V2 Series
Model
Parameters
HCVR7204A-V2
HCVR7208A-V2
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
1080P /720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
PAL:1~25f/s；NTSC：1~30f/s
Video Bit Rate
2048Kbps-6144Kbps Kbps-4096Kbps， For 1080P:default value is 4Mbps，max value is 6Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（16Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， HDMI/ VGA video output at the same time (VGA/HDMI of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，RCA port, audio via coaxial cable
Audio Output
1-ch，RCA port
Bidirectional Talk Input
Support（Reuse the audio port）
5
Model
Parameters
HCVR7204A-V2
HCVR7208A-V2
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm
Alarm Input
4-ch alarm input
16-ch alarm input
Alarm Output
3-ch alarm output
HDD
HDD Port
2 SATA ports. Does not support eSATA port.
Space/HDD
4T
Communication Port
Network
1 RJ45 port, 1000Mbps Ethernet port
Communication
RS485 port
USB
2 USB ports
Other
Power
DC12V
Power Consumption
≤30W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
1U case，375mm（W）×280mm（D）×50mm（H）
Weight
1.5kg～2.5kg（exclude HDD）
Installation Mode
Desk installation
1.3.3 HCVR52XXL-V2 Series
Model
Parameters
HCVR5204L-V2
HCVR5208L-V2
HCVR5216L-V2
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
PAL:1~25f/s；NTSC：1~30f/s
Video Bit Rate
1536Kbps-4096Kbps， For 720P:default value is 2Mbps，max value is 4Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
6
Model
Parameters
HCVR5204L-V2
HCVR5208L-V2
HCVR5216L-V2
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， HDMI/ VGA video output at the same time (VGA/HDMI of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，RCA port, audio via coaxial cable
Audio Output
1-ch，RCA port
Bidirectional Talk Input
Support（Reuse the audio port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm
Alarm Input
4-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
3-ch alarm output
HDD
HDD Port
2 SATA ports. Does not support eSATA port
Space/HDD
4T
Communication Port
Network
1 RJ45 port, 1000Mbps Ethernet port
Communication
RS485 port
USB
2 USB ports
Other
Power
DC12V
Power Consumption
≤30W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
1.5U case，440mm（W）×410mm（D）×70mm（H）
Weight
3.0kg～3.5kg（exclude HDD）
Installation Mode
Desk installation
1.3.4 HCVR54XXL-V2 Series
7
Model
Parameters
HCVR5404L-V2
HCVR5408L-V2
HCVR5416L-V2
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
PAL:1~25f/s；NTSC：1~30f/s
Video Bit Rate
1536Kbps-4096Kbps， For 720P:default value is 2Mbps，max value is 4Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（8Mbps）
Video Output
1-ch VGA output, 1-ch HDMI output， 1-ch TV output, HDMI/ VGA/TV video output at the same time (VGA/HDMI/TV of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch，BNC port, audio via coaxial cable
Audio Output
1-ch，BNC port
Bidirectional Talk Input
Support（Independent bidirectional talk port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm
Alarm Input
8-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
6-ch alarm output
HDD
HDD Port
4 SATA ports. Does not support eSATA port
Space/HDD
4T
8
Model
Parameters
HCVR5404L-V2
HCVR5408L-V2
HCVR5416L-V2
Communication Port
Network
1 RJ45 port, 1000Mbps Ethernet port
Communication
1 RS232 port, 1 RS422 port, 1 RS485 port
USB
3 USB ports (One at the front panel and two at the rear panel)
Other
Power
AC90~264V 50+2% Hz (4/8-ch max 75W)
Power Consumption
≤35W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
1.5U case，440mm（W）×410mm（D）×70mm（H）
Weight
4.5kg～5.5kg（exclude HDD）
Installation Mode
Desk/rack installation
1.3.5 HCVR58XXS-V2 Series
Model
Parameters
HCVR5804S-V2
HCVR5808S-V2
HCVR5816S-V2
System
Main Processor
High-performance industrial embedded micro controller
OS
Embedded LINUX
Video
Video Encode Standard
H.264
Encode Resolution
720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
PAL:1~25f/s；NTSC：1~30f/s
Video Bit Rate
1536Kbps-4096Kbps， For 720P:default value is 2Mbps，max value is 4Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream
Support
Audio
Encode Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate
64Kbps
Video Port
Analog Video Input
4-ch, BNC port
8-ch, BNC port
16-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（8Mbps）
9
Model
Parameters
HCVR5804S-V2
HCVR5808S-V2
HCVR5816S-V2
Video Output
1-ch VGA output, 1-ch HDMI output， 1-ch TV output, HDMI/ VGA/TV video output at the same time (VGA/HDMI/TV of the same video source)
Loop Output
N/A
Matrix Output
N/A
Audio Port
Audio Input
4-ch ， BNC port, audio via coaxial cable
8-ch ， BNC port, audio via coaxial cable
16-ch ， BNC port, audio via coaxial cable
Audio Output
1-ch，RCA port
Bidirectional Talk Input
Support（Independent bidirectional talk port）
Record
Record Mode
Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback
Max 8-ch playback
Max 16-ch playback
Backup Mode
HDD, burner, flash disk, network backup.
Alarm
Alarm Input
8-ch alarm input
8-ch alarm input
16-ch alarm input
Alarm Output
6-ch alarm output
HDD
HDD Port
8 SATA ports，does not support eSATA port
Space/HDD
4T
Communication Port
Network
2 RJ45 ports, 1000Mbps Ethernet port
Communication
1 RS232 port, 1 RS422 port, 1 RS485 port
USB
3 USB ports (One at the front panel and two at the rear panel)
Other
Power
AC90~264V 50+2% Hz (Max 220W)
Power Consumption
≤35W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension
2U case，440mm（W）×460mm（D）×89mm（H）
Weight
7.0kg～8.0kg（exclude HDD）
Installation Mode
Desk/rack installation
10
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series DVR for the first time, please refer to this part first.
2.1 Front Panel
2.1.1 HCVR52XXA-V2/ HCVR72XXA-V2 Series
The front panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or shut down DVR.
Shift
Shift
In textbox, click this button to switch between numeral, English(Small/Capitalized),donation and etc.
Up/1Down/4
、
Activate current control, modify setup, and then move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Left/2 Right/3
Shift current activated control,
When playback, click these buttons to control playback bar. In text mode, input number 2(English character A/B/C) /3(English character D/E/F)
ESC
ESC
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor mode.
Enter
ENTER
Confirm current operation
Go to default button
Go to menu
Record
REC
Manually stop/start recording, working with direction keys or numeral keys to select the recording channel.
11
Slow play/8
Multiple slow play speeds or normal playback. In text mode, input number 8 (English character T/U/V).
Assistant
Fn
One-window monitor mode, click this button to display assistant function: PTZ control and image color.
Backspace function: in numeral control or text control, press it for 1.5seconds to delete the previous character before the
In motion detection setup, working with Fn and direction keys to realize setup.
In text mode, click it to switch between numeral, English character(small/capitalized) and etc.
Realize other special functions.
Fast play/7
Various fast speeds and normal playback. In text mode, input number 7 (English character P/Q/R/S).
Play previous/0
|
In playback mode, playback the previous video In text mode, input number 0.
Reverse/Pause/6
||
In normal playback or pause mode, click this button to reverse playback In reverse playback, click this button to pause playback.
Play Next/9
|
In playback mode, playback the next video In menu setup, go to down ward of the dropdown list. In text mode, input number 9 (English character W/X/Y/Z)
Play/Pause /5
||
In normal playback click this button to pause playback In pause mode, click this button to resume playback. In text mode, input number 5(English character J/K/L).
USB port
To connect USB storage device, USB mouse.
Network abnormal indication light
Net
Network error occurs or there is no network connection, the light becomes red to alert you.
HDD abnormal indication light
HDD
HDD error occurs or HDD capacity is below specified threshold value, the light becomes red to alert you.
Record light
1-16
System is recording or not. It becomes on when system is recording.
IR Receiver
IR
It is to receive the signal from the remote control.
12
2.1.2 HCVR52XXL-V2/ HCVR54XXL-V2 Series
The front panel is shown as in Figure 2-2.
Figure 2-2
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or shut down DVR.
Shift
Shift
In textbox, click this button to switch between numeral, English(Small/Capitalized),donation and etc.
Up/1 Down/4
、
Activate current control, modify setup, and then move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Left/2 Right/3
Shift current activated control,
When playback, click these buttons to control playback bar. In text mode, input number 2(English character A/B/C)
ESC
ESC
Go to previous menu, or cancel current operation. When playback, click it to restore real-time monitor mode.
Enter
ENTER
Confirm current operation
Go to default button
Go to menu
Record
REC
Manually stop/start recording, working with direction keys or numeral keys to select the recording channel.
Slow play/8
Multiple slow play speeds or normal playback. In text mode, input number 8 (English character T/U/V).
Assistant
Fn
One-window monitor mode, click this button to display assistant function: PTZ control and image color.
13
Backspace function: in numeral control or text control, press it for 1.5seconds to delete the previous character before the
In motion detection setup, working with Fn and direction keys to realize setup.
In text mode, click it to switch between numeral, English character(small/capitalized) and etc.
Realize other special functions.
Fast play/7
Various fast speeds and normal playback. In text mode, input number 7 (English character P/Q/R/S).
Play previous/0
|
In playback mode, playback the previous video In text mode, input number 0.
Reverse/Pause/6
||
In normal playback or pause mode, click this button to reverse playback In reverse playback, click this button to pause playback.
Play Next/9
►│
In playback mode, playback the next video In menu setup, go to down ward of the dropdown list. In text mode, input number 9 (English character W/X/Y/Z)
Play/Pause /5
►||
In normal playback click this button to pause playback In pause mode, click this button to resume playback. In text mode, input number 5(English character J/K/L).
USB port
To connect USB storage device, USB mouse.
Network abnormal indication light
Net
Network error occurs or there is no network connection, the light becomes red to alert you.
HDD abnormal indication light
HDD
HDD error occurs or HDD capacity is below specified threshold value, the light becomes red to alert you.
Record light
1-16
System is recording or not. It becomes on when system is recording.
2.1.3 HCVR58XXS-V2 Series
This series products’ front panel is shown as below. See Figure 2-3.
Figure 2-3
14
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or shut down DVR.
Number button
0-9
Input Arabic number Switch channel
Input number more than 10
-/--
If you want to input a number more than 10, please click this button and then input.
Shift
In textbox, click this button to switch between numeral, English(Small/Capitalized),donation and etc.
Enable or disable tour.
Fast play
Various fast speeds and normal playback.
Slow play
Multiple slow play speeds or normal playback.
Play/Pause
In normal playback click this button to pause playback In pause mode, click this button to resume playback.
Reverse/Pause
In normal playback or pause mode, click this button to reverse playback In reverse playback, click this button to pause playback.
Play previous
|
In playback mode, playback the previous video
Play Next
|
In playback mode, playback the next video In menu setup, go to down ward of the dropdown list.
Up/ Down
、 Activate current control, modify setup, and then move up and
down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Left/ Right
Shift current activated control, and then move left and right.
When playback, click these buttons to control playback bar.
ESC
ESC Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor mode.
Enter
ENTER Confirm current operation
Go to default button
Go to menu
15
Assistant
Fn
One-window monitor mode, click this button to display assistant function: PTZ control and image color.
Backspace function: in numeral control or text control, press it for
1.5 seconds to delete the previous character before the cursor.
In motion detection setup, working with Fn and direction keys to realize setup.
In text mode, click it to switch between numeral, English character(small/capitalized) and etc.
In HDD management interface, you can click it to switch HDD record information and other information (Menu prompt)
Realize other special functions.
Record
REC
Manually stop/start recording, working with direction keys or numeral keys to select the recording channel.
Window switch
Mult
Click it to switch one-window/multiple-window.
Shuttle(outer ring)
In real-time monitor mode it works as left/right direction key. Playback mode, counter clockwise to forward and clock wise to backward.
Jog(inner dial)
Up/down direction key. Playback mode, turn the inner dial to realized frame by frame playback. (Only applies to some special versions.)
USB port
To connect USB storage device, USB mouse, burner and etc.
Record light
1-32
For 4/8/16 channel device: indication light on means that the channel is in recording.
For 32 channel device: Indication Light on: 1-16 channel is in recording Indication Light flashes: 17-32 channel is in recording Indication Light normally on: the corresponding channels are in recording
Remote control indication light
ACT
Remote control indication light
Status indication light
Status
The light is on if device operates properly.
Power indication light
PWR
Power indication light IR Receiver
IR
It is to receive the signal from the remote control.
16
2.2 Rear Panel
2.2.1 HCVR52XXA-V2/ HCVR72XXA-V2 Series
This series products’ rear panel is shown as below. See Figure 2-4. The following figure is based on HCVR7204A-V2 series product.
Figure 2-4
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1 Power switch
Power on/off button.
2
1～4
Alarm input port 1～4
There are two types; NO (normal open)/NC
(normal close).
When your alarm input device is using external
power, please make sure the device and the DVR have the same ground.
NO1～NO3
Alarm output port 1～3
3 groups of alarm output ports. (Group 1：port
NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO：Normal open alarm output port. C：Alarm output public end.
C1～C3
3 Power input
port
Input DC 12V/5A.
4
AB
RS-485 communicati on port
RS485_A port. It is the cable A. You can connect
to the control devices such as speed dome PTZ.
RS485_B.It is the cable B. You can connect to
the control devices such as speed dome PTZ.
5
AUDIO IN
Audio input port
It is to receive the analog audio signal output from the devices such as mike phone, pickup.
6
VIDEO IN
Video input port
Connect to analog camera to input video signal.
17
SN
Icon
Name
Note
7 GND
Alarm input ground port.
8
AUDIO OUT
Audio output port
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
9
HDMI
High Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
10 USB2.0 port
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.
11
VGA
VGA video output port
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.
12 Network port
1000M Ethernet port
2.2.2 HCVR52XXL-V2/ HCVR54XXL-V2 Series
This series products’ rear panel is shown as below. See Figure 2-5. The following figure is based on the HCVR5416L-V2 series product.
Figure 2-5
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1 Power switch
Power on/off button.
2
RS-232
RS-232 debug COM.
It is for general COM debug to configure IP address or transfer transparent COM data.
18
SN
Icon
Name
Note
3
1～16
Alarm input port 1～16
There are four groups.
The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
When your alarm input
device is using external power, please make sure the device and the DVR have the same ground.
NO1～NO5
Alarm output port 1～5
5 groups of alarm output
ports. (Group 1 ： port NO1 ～ C1,Group 2:port NO2 ～ C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output
alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO: Normal open alarm
output port.
C: Alarm output public
end.
NC: Normal close alarm
output port.
C1～C5
NC5
A
RS-485 communication port
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.
T+、T-、R+、R-
Four-wire full-duplex 485 port
Four-wire full-duplex 485 port. T+，T- is the output wire. R+，R- is the input wire.
19
SN
Icon
Name
Note
CTRL 12V
Control power output
Controller 12V power output. It is to control the on-off alarm relay output.
4
VIDEO OUT
Video output port
Connect to video output devices such as TV.
5
AUDIO OUT
Audio output port
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
6
MIC OUT
Audio output port
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
Bidirectional talk output. Audio output on
1-window video monitor.
Audio output on
1-window video playback.
7
MIC IN
Audio input port
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as mike phone, pickup.
8
AUDIO IN
Audio input port
It is to receive the analog audio signal output from the devices such as mike phone, pickup.
9
VIDEO IN
Video input port
Connect to analog camera to input video signal.
10 Network port
1000M Ethernet port
11
VGA
VGA video output port
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.
12
HDMI
High Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
20
SN
Icon
Name
Note
13
eSATA
eSATA port
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.
14 USB2.0 port
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.
15 Power socket
Power socket 16 GND
GND
2.2.3 HCVR58XXS-V2 Series
The rear panel is shown as in Figure 2-6. The following figure is based on the HCVR5816S-V2 series product.
Figure 2-6
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1 Power socket
Power socket
2 Power switch
Power on/off button.
3
RS-232
RS-232 debug COM.
It is for general COM debug to configure IP address or transfer transparent COM data.
21
SN
Icon
Name
Note
4
1～16
Alarm input port 1～16
There are four groups.
The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
When your alarm input
device is using external power, please make sure the device and the DVR have the same ground.
NO1～NO5
Alarm output port 1～5
5 groups of alarm output
ports. (Group 1 ： port NO1 ～ C1,Group 2:port NO2 ～ C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output
alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO: Normal open alarm
output port.
C: Alarm output public
end.
NC: Normal close alarm
output port.
C1～C5
NC5
A
RS-485 communication port
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.
T+、T-、R+、R-
Four-wire full-duplex 485 port
Four-wire full-duplex 485 port. T+，T- is the output wire. R+，R- is the input wire.
CTRL 12V
Control power output
Controller 12V power output. It is to control the on-off alarm
Loading...
+ 222 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use