Page 1
1 Megapixel HDCVI Dome Camera User's Manual
Version 1.0.1
Page 2
i
Table of Contents
1 General Introduction .................................................................................................................. 1
1.1 Overview ........................................................................................................................ 1
1.2 Features ......................................................................................................................... 1
1.3 Functions ....................................................................................................................... 1
1.4 Specifications ................................................................................................................ 2
2 Framework and Dimensions ..................................................................................................... 3
3 Installation.................................................................................................................................... 5
Appendix Toxic or Hazardous Materials or Elements ................................................................. 7
Page 3
ii
Welcome
Thank you for purchasing our HDCVI camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
Page 4
iii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC in the IEC60950-1.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
If this product is installed in the ceiling, please make sure the installation position can sustain the min
50N.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series HDCVI camera should be installed in a cool, dry place away from direct sunlight or strong
light, inflammable, explosive substances and etc.
This series camera shall work on the specified working temperature. Please keep it away from the
electromagnetic radiation object and environment.
Please make sure the CMOS component is out of the radiation of the laser beam device. Otherwise it
may result in CMOS optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Daily Maintenance
Page 5
iv
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
Use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the
mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the device.
Please put the dustproof cap to protect the CMOS component when you do not use the camera.
Page 6
1
1 General Introduction
1.1 Overview
This series megapixel HD camera conforms to the HDCVI standard. It supports video signal high-speed
long distance transmission without any delay. It can be controlled by the DVR conforming to the HDCVI.
1.2 Features
High-performance CMOS image sensor, megapixel definition.
HD video, coaxial cable to transmit the control signal.
Support 75-3 coaxial cable transmission without any loss. Transmission distance is over 500m.
Support 720P@25, 720P@30.
High speed, long distance real-time transmission.
Support ICR switch to realize surveillance both in the daytime and at night.
Support auto exposure, auto white balance, auto electronic shutter and auto gain function.
Restore clear and vivid video, high signal to noise ratio (SNR).
Support DC12V power supplying.
IP66 compliance.
Support intelligent IR function.
1.3 Functions
HDCVI Specification
HDCVI（High Definition Composite Video Interface） is an over-coaxial –cable HD video transmission
standard. The technology renders two HD video formats by progressive scanning.
ICR
The IR cut removal is to filter the IR light in the daytime and then auto switch to the general fitter at night.
This function allows the camera to output the high sensitivity and clear video.
Smart IR technology
The sensor controls the IR light on/off via the combination work of the hardware and software, which
realizes the automatically IR light compensation according to the environment illumination.
Auto gain function
To output the standard video signal in the different illumination environments, the amplifier needs to adjust
in a wide range. The system can enhance the camera sensitivity in low illumination and enhance the video
signal output to get the clear and high definition video.
Auto white balance
The white balance refers to the camera to restore the white object color. It allows the camera to
automatically adjust the color temperature in indoor and outdoor environment, just like our human eyes
does.
Auto exposure
Page 7
2
System can automatically set shutter speed and iris value according to the snapshot video exposure
condition.
Auto electronic shutter
The system can automatically adjust the electronic shutter when the environment light changes.
1.4 Specifications
Model
Parameter
1 Megapixel HDCVI IR Waterproof Dome Camera Series
HAC-HDW1100MP/N
Video Processor
1/2.9" 1.0 Mega Pixels CMOS
Video Format
PAL/NTSC
Effective Pixel
1280（H）* 720（V）
Min Illumination
0.01Lux @（F1.2,AGC ON），0Lux with IR
Electronic Shutter
PAL：1/50s~1/100,000s
NTSC：1/60s~1/100,000s
Video Standard
HDCVI compliance
Video Frame Rate
1280×720@25 fps；1280×720@30 fps
Lens Port
M12
Lens Type
2.8/3.6/6/8mm optional
Day/Night Switch
ICR mechanical auto switch
Sync Mode
INT
Video Output
1-channel HDCVI high definition video output
White Balance
Auto
Gain Control
Auto
BLC
Auto
Smart IR
Support
Max IR Distance
20m
Protection Level
IP66
Working Temperature
/Humidity
-30℃~+60℃. Humidity is less than 95%(no condensation)
Power
DC 12V±10%
Power Consumption
2.5W MAX
(Input: 12V 0.21A)
Dimension(mm)
φ94.0×98.0
Weight
350g
Installation Mode
Wall mount/In-ceiling mount
Page 8
3
2 Framework and Dimensions
Please refer to the following figures for dimension information. The unit is mm. See Figure 2-1 and Figure
2-2.
Figure 2-1
Figure 2-2
Please refer to the following sheet for detailed information.
Page 9
4
SN
Name
Function
1
Power input
port
Connect to the DC 12V power to input the power.
2
Video output
port
BNC port is to output HDCVI video signal.
You can connect to the devices such as the DVR or the NVS conforming to
the HDCVI specifications.
3
Installation
base
Device installation base
4
Rotate base
Adjust the rotate base to adjust the monitor angle.
5
Panel cover
Adjust the panel cover to adjust the monitor angle.
6
Dome Body
Adjust the dome body to adjust monitor angle.
7
IR light
It is to send out the IR compensation light to enhance the night vision.
8
Lens
It is to receive the optical signal from the environments.
Page 10
5
3 Installation
Important
Please make sure the installation surface can min support the 3X weight of the camera and the
bracket.
The dome camera usually uses the ceiling installation. It can be installed on the ceiling or the wall.
Step1 Device Installation
Take the wrench from the accessories bag and use it to loosen the three set screws on the side of the
camera body. See Figure 3-1.
Figure 3-1
Step 2 Pedestal Installation
Turn the pedestal of the device and then pull the cable through it. Use four screws to secure the pedestal
to the proper position. See Figure 3-2.
Figure 3-2
Page 11
6
Step 3 Adjust Monitor Angle
Turn the pan base to the pedestal and secure firmly. Adjust rotate base and the dome body to get the lens
to the proper monitor angle. See Figure 3-3.
Figure 3-3
Step 4 Fix Monitor Angle
To prevent the dome from moving, use wrench to secure the three set screws to secure the monitor angle
position.
Page 12
7
Appendix Toxic or Hazardous Materials or Elements
Component
Name
Toxic or Hazardous Materials or Elements
Pb
Hg
Cd
Cr VI
PBB
PBDE
Circuit Board
Component
○ ○ ○ ○ ○
○
Device
Construction
Material
○
○ ○ ○ ○ ○
Wire and Cable
○
○ ○ ○ ○ ○
Packing
Components
○ ○ ○ ○ ○
○
Accessories
○ ○ ○ ○ ○
○
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts
is below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the
environmental-friendly use period (EFUP) period, the toxic or hazardous substance or elements contained
in products will not leak or mutate so that the use of these (substances or elements) will not result in any
severe environmental pollution, any bodily injury or damage to any assets. The consumer is not authorized
to process such kind of substances or elements, please return to the corresponding local authorities to
process according to your local government statutes.
Note
This manual is for reference only. Slight difference may be found in the user interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local service engineer for more information.
Loading...