How it Works
Dahua
Loading...
ESS3116D-JR
User Manual
116 pgs7.97 Mb0
Table of contents
Loading...

Dahua ESS3116X, ESS5024SR, ESS5024S, ESS5016S, ESS5016SR User Manual

...
ESS Series Internet Intelligent Storage User’s Manual
V 2.0.1
ESS Series User’s Manual
i
Table of Contents
1.1.1 Host Model ................................................................................................................................... 1
1.1.2 Disk Array Enclosure Model ....................................................................................................... 1
1.3.1 Front Panel................................................................................................................................... 2
1.3.2 Rear Panel ................................................................................................................................ ... 2
1.4.1 Front Panel................................................................................................................................... 3
1.4.2 Rear Panel ................................................................................................................................ ... 4
1.5.1 Front Panel................................................................................................................................... 5
1.5.2 Rear Panel ................................................................................................................................ ... 6
1.6.1 Front Panel................................................................................................................................... 7
1.6.2 Rear Panel ................................................................................................................................ ... 7
1.7.1 Front Panel................................................................................................................................... 9
1.7.2 Rear Panel ................................................................................................................................ ... 9
1.8.1 Front Panel................................................................................................................................. 10
1.8.2 Rear Panel ................................................................................................................................ . 11
1.9.1 Front Panel................................................................................................................................. 12
ESS Series User’s Manual
ii
1.9.2 Rear Panel ................................................................................................................................ . 13
1.10.1 ESS2016X ............................................................................................................................. 16
1.10.2 ESS3116X ............................................................................................................................. 17
1.10.3 ESS5016S/ ESS5016S-R .................................................................................................... 18
1.10.4 ESS5016D-R ......................................................................................................................... 19
1.10.5 ESS5024S/ ESS5024S-R .................................................................................................... 21
1.10.6 ESS5024D-R ......................................................................................................................... 22
1.10.7 ESS5048S/ ESS5048S-R .................................................................................................... 23
1.11.1 ESS2016X-J ................................................................................................ .......................... 24
1.11.2 ESS3116S-J/ ESS3116S-JR/ESS3116D-JR ...................................................................... 25
1.11.3 ESS3124S-J/ ESS3124S-JR/ESS3124D-JR ...................................................................... 26
1.11.4 ESS3148S-J/ ESS3148S-JR ............................................................................................... 27
ESS Series User’s Manual
iii
3.2.1 System ....................................................................................................................................... 33
3.2.2 Parameters................................................................................................................................. 34
3.2.3 Account ...................................................................................................................................... 35
3.2.4 Guide .......................................................................................................................................... 37
3.2.5 Enclosure ................................................................................................................................... 37
3.2.6 Performance .............................................................................................................................. 38
3.2.7 Upgrade...................................................................................................................................... 39
3.2.8 Shut down System..................................................................................................................... 40
3.2.9 Version ....................................................................................................................................... 41
3.3.1 Network Configuration ............................................................................................................... 41
3.3.2 Virtual Network (For dual-controller series product only) ....................................................... 45
3.4.1 Disk Information ......................................................................................................................... 46
3.4.2 Disk Status ................................................................................................................................. 49
3.4.3 RAID Configuration ................................................................................................................... 50
3.4.4 Pool Configuration ................................................................................................ ..................... 53
3.4.5 Logic Volume ............................................................................................................................. 55
3.5.1 Add iSCSI share configuration ................................................................................................. 56
3.5.2 Edit iSCSI share ........................................................................................................................ 57
3.5.3 Delete iSCSI share configuration ............................................................................................. 58
3.6.1 Share configuration ................................................................................................................... 58
3.6.2 FTP Configuration ..................................................................................................................... 60
3.8.1 Log Review ................................................................................................................................ 62
3.8.2 Service Status ............................................................................................................................ 64
3.8.3 Resume ...................................................................................................................................... 64
ESS Series User’s Manual
iv
4.2.1 Create SAMBA Share ............................................................................................................... 66
4.2.2 Create NFS Share ................................................................................................ ..................... 66
4.2.3 Create FTP Share ..................................................................................................................... 66
4.2.4 Create iSCSI share ................................................................................................................... 67
4.3.1 Access SAMBA Share Directory .............................................................................................. 67
4.3.2 Access NFS Share Directory .................................................................................................... 69
4.3.3 Access FTP Share Directory .................................................................................................... 69
4.3.4 Access iSCSI Share Directory .................................................................................................. 70
5.2.1 Front Panel................................................................................................................................. 71
5.2.2 Rear Panel ................................................................................................................................ . 71
5.2.3 Disk Array Enclosure Cascade Connection............................................................................. 72
5.3.1 Front Panel................................................................................................................................. 73
5.3.2 Rear Panel ................................................................................................................................ . 73
5.4.1 Front Panel................................................................................................................................. 75
5.4.2 Rear Panel ................................................................................................................................ . 75
5.5.1 Front Panel................................................................................................................................. 76
5.5.2 Rear Panel ................................................................................................................................ . 77
ESS Series User’s Manual
v
5.6.1 Front Panel................................................................................................................................. 78
5.6.2 Rear Panel ................................................................................................................................ . 79
5.7.1 Front Panel................................................................................................................................. 80
5.7.2 Rear Panel ................................................................................................................................ . 81
5.8.1 Cascade Connection Sheet ...................................................................................................... 83
5.8.2 Cascade Connection Sample ................................................................................................... 84
5.12.1 Preparation ............................................................................................................................ 88
5.12.2 Update Steps ......................................................................................................................... 88
5.12.3 Check Update Result ............................................................................................................ 90
ESS Series User’s Manual
vi
9.2.1 View System Info ..................................................................................................................... 104
9.2.2 Reset Password....................................................................................................................... 104
9.2.3 Network Settings ..................................................................................................................... 104
9.2.4 Super User ............................................................................................................................... 104
ESS Series User’s Manual
vii
Welcome
Thank you for using our internet intelligent storage system! This operating manual is designed to be a reference tool for the installation and operation of your system. Before installation and operation please read the following safeguards and warnings carefully!
ESS Series User’s Manual
viii
Important Safeguard and Warnings
1．Electrical Safety
All installation and operation should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electric shock caused by improper handling or installation.
2．Installation
Keep upward. Handle with care. Do not apply power to the unit before completing installation.
3．Qualified Engineers Needed
All installation here should be done by the qualified engineers. All the examination and repair should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.
4．Environment
The server shall be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc.
5． Maintenance
Disconnect all power-supply before opening upper lid or maintenance in case of getting shock. Please replace the lithium battery of the same model after the old lithium battery got damaged.
6. About Accessories
Be sure to use all the accessories recommended by manufacturer.
Contact you local retailer ASAP if something is missing or damaged in your package.
7. Disk Replacement
When replace the disk, please make sure you are using the same model from the same manufacturer and of the same capacity!
ESS Series User’s Manual
1
Model
Case Height
HDD No.
Power Mode
Network Setup
Controller No.
ESS2016X
3U
16
Single-power supplying
LAN1/LAN2/WEB
1
ESS3116X
3U
16
Single-power supplying
LAN1/LAN2/LAN3/LAN4
ESS5016S/ ESS5016S­R
3U
16
Single-power supplying/redun dancy-power supplying
LAN1/LAN2/LAN3/LAN4/ WEB
1 ESS5016D-
R
3U
16
Redundancy­power supplying
LAN1/LAN2/LAN3/LAN4/ 10G_1/10G_2/WEB
2
ESS5024S/ ESS5024S­R
4U
24
Single-power supplying/redun dancy-power supplying
LAN1/LAN2/LAN3/LAN4/ WEB
1 ESS5024D-
R
4U
24
Redundancy­power supplying
LAN1/LAN2/LAN3/LAN4/ 10G_1/10G_2/WEB
2
ESS5048S/ ESS5048S­R
8U
48
Redundancy­power supplying/4­power supplying
LAN1/LAN2/LAN3/LAN4/ WEB
1
Model
Case Height
HDD No.
Power Mode
Network Setup
ESS2016X-J
3U
16
Single-power supplying
1
ESS3116S-J/ESS3116S­JR
3U
16
Single-power supplying/redundancy-power supplying
1 ESS3116D-JR
3U
16
Redundancy-power supplying
2
ESS3124S-J/ESS3124S­JR
4U
24
Single-power supplying/redundancy-power supplying
1 ESS3124D-JR
4U
24
Redundancy-power supplying
2
ESS3148S-J/ESS3148S­JR
8U
48
Redundancy-power supplying/4-power supplying
1

1 Overview

The ESS internet intelligent storage unit is a storage disk array product. It provides standard network file share service and realizes IPSAN/NAS total solutions. It is a centralized storage solutions of high-capacity, high expansion, and high security. The host supports disk array enclosure to extend its storage capacity. The disk array enclosure is mainly to connect the host to extend network storage device capacity.

1.1 Model List

This user’s manual is to introduce the following products. Please refer to the following sheet for detailed information.

1.1.1 Host Model

1.1.2 Disk Array Enclosure Model

2

1.2 Connection Sample

SN
Name
Function
1
Power on-off button
Press it to boot up the device. Press it for 5 seconds to shut down the device.
2
HDD Indicator Light
When system HDD is reading or writing, the blue light becomes flash.
3
Alarm Indicator Light
The red light is flashing when there is an alarm or abnormal situation.
4
Network Indicator Light
The blue light is flashing when the network connection is OK.
The connection sample is shown as in Figure 1-1.
Figure 1-1
ESS Series User’s Manual

1.3 ESS2016X

1.3.1 Front Panel

The front panel is shown as below. See Figure 1-2. The HDD slot number ranges from left to right, from top to the bottom.
Figure 1-2

1.3.2 Rear Panel

The rear panel is shown as below. See Figure 1-3.
3
Figure 1-3
SN
Port
Function
1
Power on-off button
Connect or cut off the device power.
2
Power Port
Connect to AC power supplying.
3
Case fan
It is for case ventilation.
4
Power fan
It is for power ventilation
5
SAS port
Connect to IN port of the disk array enclosure. LINK light: The light becomes on when the disk array enclosure is connected. ACCESS light: The light flashes when the host is visiting disk array enclosure.
6
eSATA port
It is reserved port for future development.
7
RS232 port
It is to debug device and login command interface. Please refer to chapter 9 for detailed command operation information.
8 LAN1, LAN2
Two data Ethernet ports. It is to transmit data. 9
WEB port
Ethernet Management port. Login Web via this port.
ESS Series User’s Manual

1.4 ESS3116X

1.4.1 Front Panel

The front panel is shown as in Figure 2-1. In Figure 2-1, you can view HDD serial number. The value ranges from left to the right. You can see the 13th to 16th at the bottom of the unit. You can use the HDD bracket in the chassis to install HDD.
a) Pull out HDD bracket from the front panel. b) Use four screws to fix one HDD in the HDD bracket firmly.
4
Figure 1-4
SN
Name
Function
1
Power on-off button
Press it to boot up the device. Press it for a long time to reboot the device.
2
System HDD Indicator Light
When system HDD is reading or writing, the blue light becomes flash. The system HDD storage the important configuration files of the device, factory default configuration files and device initial boot up data.
3
Alarm Indicator Light
The red light is flashing when there is an alarm or abnormal situation.
4
Network Indicator Light
The blue light is flashing when the network connection is OK.
5.6
USB port
Connect to USB device.
ESS Series User’s Manual

1.4.2 Rear Panel

ESS3116X series product has two kinds of rear panels. There are slightly difference on the power supplying module and fan module. The single-power supplying interface is shown as In Figure 1-8.
Figure 1-5
The redundancy-power supplying rear panel is shown as below. See Figure 1-9.
ESS Series User’s Manual
5
SN
Port
Function
1
Power Port
Connect to 220V AC.
2
Blowing machine
It is for ventilation.
3
Fan
It is for ventilation.
4
Ethernet port
It is used to transmit data. 1000M Ethernet port.
5
VGA port
Connect to monitor.
6
COM
Connect to RS232 COM to go to the command interface.
7
SAS port
Connect to disk array enclosure.
SN
Name
Function
1
Power on-off button
Press it to boot up the device. Press it for 5 seconds to shut down the device.
2
HDD Indicator Light
When system HDD is reading or writing, the blue light becomes flash.
3
Alarm Indicator Light
The red light is flashing when there is an alarm or abnormal situation.
Figure 1-6
You can refer to the following sheet for detailed information.

1.5 ESS5016S/ ESS5016S-R

1.5.1 Front Panel

The front panel is shown as below. See Figure 1-7. The HDD slot number ranges from left to right, from top to the bottom.
Figure 1-7
ESS Series User’s Manual
6
4
Network Indicator Light
The blue light is flashing when the network connection is OK.
SN
Port
Function
1
Power Port
Connect to AC power supplying.
2
Power on-off button
Connect or cut off the device power.
3
Case fan
It is for case ventilation.
4
Blower
It is for case ventilation.
5
Main control module
It is about all kinds of ports and indictor light introduction. Please refer to the following sheet.
6
Blower
It is for case ventilation.

1.5.2 Rear Panel

This series product has two kinds of rear panels. There are slightly difference on the power supplying module and fan module. The single-power supplying interface is shown as In Figure 1-8.
Figure 1-8
The redundancy-power supplying rear panel is shown as below. See Figure 1-9.
Figure 1-9
You can refer to the following sheet for detailed information.
ESS Series User’s Manual
7
SN
Function
LAN1～LAN8
Data Ethernet port. It is to transmit data.
WEB port
Ethernet Management port. Login Web via this port.
USB port
USB port
PORT1/PORT2
Connect to the IN port of the disk array enclosure.
CONSOLE
COM port. It is to debug the device and view the login command interface. Refer to Appendix D for detailed information.
RUN
The light is on after system booted up and begins running.
M/S
Main control indictor light. The light is on when system is malfunction. The light is off when system is running properly.
ERR
System error indictor light.
The error light is on when system is abnormal.  The error light is off when system is running properly.
CACHE
It is reserved for future use.
RST
Press it for 5 seconds to restore default setup (network setup, user password, time sync, email alarm and etc.).
SN
Name
Function
①
Power on-off button
Press it to boot up the device. Press it for 5 seconds to shut down the device.
②
HDD Indicator Light
When system HDD is reading or writing, the blue light becomes flash.
③
Alarm Indicator Light
The red light is flashing when there is an alarm or abnormal situation.
④
Network Indicator Light
The blue light is flashing when the network connection is OK.
You can refer to the following sheet for master control module information.

1.6 ESS5016D-R

1.6.1 Front Panel

The front panel is shown as in Figure 1-10. The HDD slot number ranges from left to right, from top to the bottom.
Figure 1-10

1.6.2 Rear Panel

ESS Series User’s Manual
8
SN
Port
Function
1
Power port
Connect to AC power supplying source.
2
Battery box
It is to install the battery box.
3
Fan
It is for case ventilation.
4
Main control module
It is about all kinds of ports and indictor light introduction. Please refer to the following sheet.
Port/Indicator Light
Function
LAN1～LAN4
1000Mbps data Ethernet port. It is to transmit data.
10G_1, 10G_2
10000Mbps data Ethernet port. It is to transmit data. (Optional)
WEB port
Ethernet Management port. Login Web via this port.
USB port
USB port
PORT1/PORT2
Connect to the IN port of the disk array enclosure.
CONSOLE
COM port. It is to debug the device and view the login command interface.
RUN
The light is flashing after system booted up and begins running.
M/S
Main control indictor light.
The light is on if it is the main controller.  The light is off if it is the slave controller.
ERR
System error indictor light.
The error light is on when system is abnormal.  The error light is off when system is running properly.
CACHE
It is reserved for future use.
RST
Press it for 5 seconds to restore default setup (network setup, user password, time sync, email alarm and etc.).
The interface is shown as In Figure 1-11.
Figure 1-11
You can refer to the following sheet for detailed information of the rear panel.
You can refer to the following sheet for detailed information of main control module.

1.7 ESS5024S/ ESS5024S-R

ESS Series User’s Manual
9
SN
Name
Function
①
Power on-off button
Press it to boot up the device. Press it for 5 seconds to shut down the device.
②
HDD Indicator Light
When system HDD is reading or writing, the blue light becomes flash.
③
Alarm Indicator Light
The red light is flashing when there is an alarm or abnormal situation.
④
Network Indicator Light
The blue light is flashing when the network connection is OK.

1.7.1 Front Panel

The front panel is shown as below. See Figure 1-12. The HDD slot number ranges from left to right, from top to the bottom.
Figure 1-12

1.7.2 Rear Panel

This series product has two kinds of rear panels. There are slightly difference on the power supplying module and fan module. The single-power supplying interface is shown as In Figure 1-13.
The redundancy-power supplying rear panel is shown as below. See Figure 1-14.
Figure 1-13
ESS Series User’s Manual
10
SN
Port
Function
1
Fan
It is for case ventilation.
2
Power port
Connect to AC power supplying source.
3
Main control module
It is about all kinds of ports and indictor light introduction. Please refer to the following sheet.
Port/Indicator Light
Function
LAN1～LAN8
Data Ethernet port. It is to transmit data.
WEB port
Ethernet Management port. Login Web via this port.
USB port
USB port
PORT1/PORT2
Connect to the IN port of the disk array enclosure.
CONSOLE
COM port. It is to debug the device and view the login command interface.
RUN
The light is flashing after system booted up and begins running.
M/S
Main control indictor light. The light is on when system is malfunction. The light is off when system is running properly.
ERR
System error indictor light.
The error light is on when system is abnormal.  The error light is off when system is running properly.
CACHE
It is reserved for future use.
RST
Press it for 5 seconds to restore default setup (network setup, user password, time sync, email alarm and etc.).
Figure 1-14
You can refer to the following sheet for detailed information of the rear panel.
You can refer to the following sheet for detailed information of main control module.

1.8 ESS5024D-R

1.8.1 Front Panel

The ESS5024D-R front panel is shown as below. See Figure 1-15.
ESS Series User’s Manual
11
SN
Name
Function
①
Power on-off button
Press it to boot up the device. Press it for 5 seconds to shut down the device.
②
HDD Indicator Light
When system HDD is reading or writing, the blue light becomes flash.
③
Alarm Indicator Light
The red light is flashing when there is an alarm or abnormal situation.
④
Network Indicator Light
The blue light is flashing when the network connection is OK.
SN
Port
Function
1
Fan
It is for case ventilation.
2
Power port
Connect to AC power supplying source.
The HDD slot number ranges from left to right, from top to the bottom.
Figure 1-15

1.8.2 Rear Panel

The interface is shown as In Figure 1-16.
You can refer to the following sheet for detailed information of the rear panel.
Figure 1-16
ESS Series User’s Manual
12
3
Main control module
It is about all kinds of ports and indictor light introduction. Please refer to the following sheet.
4
Battery&fan box
It is to install the battery and the case ventilation.
Port/Indicator Light
Function
LAN1～LAN4
1000Mbps data Ethernet port. It is to transmit data.
10G_1, 10G_2
10000Mbps data Ethernet port. It is to transmit data. (Optional)
WEB port
Ethernet Management port. Login Web via this port.
USB port
USB port
PORT1/PORT2
Connect to the IN port of the disk array enclosure.
CONSOLE
COM port. It is to debug the device and view the login command interface.
RUN
The light is flashing after system booted up and begins running.
M/S
Main control indictor light.
The light is on if it is the main controller.  The light is off if it is the slave controller.
ERR
System error indictor light.
The error light is on when system is abnormal.  The error light is off when system is running properly.
CACHE
It is reserved for future use.
RST
Press it for 5 seconds to restore default setup (network setup, user password, time sync, email alarm and etc.).
You can refer to the following sheet for detailed information of main control module.

1.9 ESS5048S/ ESS5048S-R

1.9.1 Front Panel

The front panel is shown as below. See Figure 1-17. The HDD slot number ranges from left to right, from top to the bottom.
ESS Series User’s Manual
13
SN
Name
Function
①
Power on-off button
Press it to boot up the device. Press it for 5 seconds to shut down the device.
②
Power Indicator Light
When the light is blue, the power connection is OK.
③
HDD Indicator Light
When system HDD is reading or writing, the blue light becomes flash.
④
Alarm Indicator Light
The red light is flashing when there is an alarm or abnormal situation.
⑤
Network Indicator Light
The blue light is flashing when the network connection is OK.
Figure 1-17

1.9.2 Rear Panel

This series product has two kinds of rear panels. There are slightly difference on the power supplying module and fan module. The redundancy-power supplying interface is shown as In Figure 1-18.
ESS Series User’s Manual
14
Figure 1-18
The four-power supplying rear panel is shown as below. See Figure 1-19.
ESS Series User’s Manual
15
SN
Port
Function
1
Fan
It is for case ventilation.
2
Slave control module
It is about all kinds of ports and indictor light introduction. Please refer to the following sheet.
3
Power port
Connect to AC power supplying source.
4
Main control module
It is about all kinds of ports and indictor light introduction. Please refer to the following sheet.
Port/Indicator Light
Function
LAN1～LAN8
Data Ethernet port. It is to transmit data.
WEB port
Ethernet Management port. Login Web via this port.
USB port
USB port
PORT1/PORT2
Connect to the IN port of the disk array enclosure.
CONSOLE
COM port. It is to debug the device and view the login command interface.
Figure 1-19
You can refer to the following sheet for detailed information of the rear panel.
You can refer to the following sheet for master control module information.
ESS Series User’s Manual
16
RUN
The light is flashing after system booted up and begins running.
M/S
Main control indictor light. The light is on when system is malfunction. The light is off when system is running properly.
ERR
System error indictor light.
The error light is on when system is abnormal.  The error light is off when system is running properly.
CACHE
It is reserved for future use.
RST
Press it for 5 seconds to restore default setup (network setup, user password, time sync, email alarm and etc.).
Port/Indicator Light
Function
CONSOLE
COM port. It is to debug the device and view the login command interface.
RUN
The light is flashing after system booted up and begins running.
M/S
Slave control indictor light. The light is on when system is malfunction. The light is off when system is running properly.
ERR
System error indictor light.
The error light is on when system is abnormal.  The error light is off when system is running properly.
SPD
SAS speed indicator light.
When the running speed is 6G, the light is off.  When the running speed is 3G, the light becomes on to alert you.
Model
ESS2016X
System
Main processer
Multiple-core special storage CPU
OS
Embedded LINUX OS
Power Mode
Single power supplying mode
Fan
Redundant dual ball bearing fan MTBF>100 thousand hours
Motherboard
Server(Support 7x24H work)
Storage
Default 4G
Case
Self-developed case,
1.2mm extra-thickness hot-dip galvanized steel. Self-developed patent removable HDD bracket.
Setup Interface
WEB GUI
Storage Protocol
Storage Protocol
iSCSI
Video Capacity
Input Video
128-channel: 2Mbps 64-channel: 4Mbps 32-channel: 8Mbps
Data Management HDD No.
16 HDDs. Support SAS/SATA HDD. Each HDD max supports 4T.
RAID Mode
RAID0/RAID1/RAID3/RAID5/RAID6/RAID10/RAID50/RAID60/JBOD one HDD/global hotspare HDD.
You can refer to the following sheet for slave control module information.

1.10 Host Specifications

1.10.1 ESS2016X

ESS Series User’s Manual
17
Model
ESS2016X
HDD Installation
Independent HDD bracket. Support HDD hot swap.
HDD Hotspare
Support global hotspare HDD
Disk Array Enclosure
Max 2-level cascade connection.
Network Port Management
Network Port
One 10/100/1000Mbps Ethernet port
Data Network port
Two 10/100/1000Mbps Ethernet ports
Specifications Dimensions
Power Consumption
100V～240V, 50Hz～60Hz
Whole Device Power Consumption
Below 400W(With HDD)，Below 200W(No HDD)
H×W×D
133mm×448mm×472mm
Installation Mode
Standard 19-inch rack installation
Net Weight
15kg
Environments Requirements
Working Environment Temperature
0℃～40℃
Working Environment Humidity
10%～80% (Non condensation）
Storage Environment Temperature
-20℃～70℃
Storage Environment Humidity
5%～90% (Non condensation)
Working Altitude
-60m～5000m
Model
ESS3116X
System
Main processer
Intel SandyBridge 64-bit multiple-core CPU
OS
Embedded LINUX OS
Power Mode
Single power supplying mode/ Redundancy-power supplying mode.
Fan
Redundant dual ball bearing fan MTBF>100 thousand hours Support online replacement
Motherboard
Server(Support 7x24H work)
Storage
Default 4G, max 8G.
Case
Self-developed case,
1.2mm extra-thickness hot-dip galvanized steel. Self-developed patent removable HDD bracket.
Setup Interface
WEB GUI
Storage Protocol
Storage Protocol
iSCSI/SAMBA/NFS/FTP
Video Capacity
Input Video
192-channel D1: 2Mbps 96-channel 720P: 4Mbps

1.10.2 ESS3116X

ESS Series User’s Manual
18
Model
ESS3116X
48-channel 1080P: 8Mbps
Data Management
HDD No.
16 SATAⅡHDDs. Each HDD max supports 4T.
RAID Mode
Raid0/Raid1/Raid5/Raid6/JBOD/one HDD
HDD Installation
Independent HDD bracket. Support HDD hot swap.
HDD Hotspare
Support global hotspare HDD
Disk Array Enclosure
Max 2-level cascade connection.
Network Port
Network Port
Four 10/100/1000Mbps Ethernet ports
Data Network port
Multiple-Ethernet port load balance binding, or four 1000Mbps Ethernet ports
General
Supported OS
Windows, Linux, Unix and etc.
Management Mode
Configuration and management function via the WEB.
Expansibility
Connect to peripheral disk array enclosure
Standardization
Total standard device, compatible with various software platforms.
Specifications Dimensions
Power Consumption
100V～240V, 47Hz～63Hz
Whole Device Power Consumption
Below 400W(With HDD)，Below 200W(No HDD)
H×W×D
133mm×448mm×472mm
Installation Mode
Standard 19-inch rack installation
Net Weight
19.5kg
Environments Requirements
Working Environment Temperature
0℃～40℃
Working Environment Humidity
10%～80% (Non condensation）
Storage Environment Temperature
-20℃～70℃
Storage Environment Humidity
5%～90% (Non condensation)
Working Altitude
-60m～3000m
Model
ESS5016S
ESS5016S-R
System
Main processer
Multiple-core special storage 64-bit CPU
OS
Embedded LINUX OS
Power Mode
400W. Single power supplying mode. Support online update.
400W. Redundancy-power supplying mode. Support online update.
Fan
Redundant dual ball bearing fan MTBF>100 thousand hours
Motherboard
Server(Support 7x24H work)

1.10.3 ESS5016S/ ESS5016S-R

ESS Series User’s Manual
19
Model
ESS5016S
ESS5016S-R Storage
Default 4G. With ECC verification.
Case
Self-developed case,
1.2mm extra-thickness hot-dip galvanized steel. Self-developed patent removable HDD bracket. SBB2.0 specifications compliance.
Setup Interface
WEB GUI
Storage Protocol
Storage Protocol
iSCSI,SAMBA,NFS,FTP
Video Capacity
Input Video
256-channel: 2Mbps 128-channel: 4Mbps 64-channel: 8Mbps
Data Management
HDD No.
16 HDDs. Support SAS/SATA HDD. Each HDD max supports 4T.
RAID Mode
RAID0/RAID1/RAID3/RAID5/RAID6/RAID10/RAID50/RAID60/JBOD one HDD/global hotspare HDD.
HDD Installation
Independent HDD bracket. Support HDD hot swap.
HDD Hotspare
Support global hotspare HDD
Disk Array Enclosure
Max 4-level cascade connection.
Network Port Management
Network Port
One 10/100/1000Mbps Ethernet port
Data Network port
Four 10/100/1000Mbps Ethernet ports
Specifications Dimensions
Power Consumption
AC 100V~240V ±10% 60Hz/50Hz
Whole Device Power Consumption
Below 400W(With HDD)
H×W×D
133.2mm×448.0mm×490.4mm
Installation Mode
Standard 19-inch rack installation
Net Weight （Without HDD）
24kg
Environments Requirements
Working Environment Temperature
0℃～40℃
Working Environment Humidity
10%～80% (Non condensation）
Storage Environment Temperature
-20℃～70℃
Storage Environment Humidity
5%～90% (Non condensation)
Working Altitude
-60m～5000m

1.10.4 ESS5016D-R

ESS Series User’s Manual
20
Model
ESS5016D-R
System
Controller
Dual-controller
Main processer
Two Intel multiple-core processors
OS
Embedded LINUX OS
Power Mode
500W. Redundancy-power supplying mode. Support online update.
Fan
Redundant dual ball bearing fan MTBF>100 thousand hours
Motherboard
Server(Support 7x24H work)
Storage
Default 16G. With ECC verification. Max 32GB.
Case
Self-developed case,
1.2mm extra-thickness hot-dip galvanized steel. Self-developed patent removable HDD bracket. SBB2.0 specifications compliance.
Setup Interface
WEB GUI
Storage Protocol
Storage Protocol
iSCSI，SAMBA，NFS，FTP，AFP，HTTP
Video Capacity
Input Video
400-channel: 2Mbps
Data Management
HDD No.
16 HDDs. Support SAS/SATA (need adapter. NOT PROVIDED.)/SSD HDD. Each HDD max supports 4T.
RAID Mode
RAID0/RAID1/RAID3/RAID5/RAID6/RAID10/RAID50/RAID60/JBOD one HDD/global hotspare HDD.
HDD Installation
Independent HDD bracket. Support HDD hot swap.
Disk Array Enclosure
Support disk array enclosure of dual-controller construction. Max 4-level cascade connection.
Data protection
Data protection in case of power outage.
Network Port
Management Network Port
Two 10/100/1000Mbps Ethernet ports
Data Network port
Eight 10/100/1000Mbps Ethernet ports. Can extend four 10Gbps high-speed Ethernet ports.
UBS Port
2 USB ports
Specifications Dimensions
Power Consumption
AC 100V~240V ±10% 60Hz/50Hz
Whole Device Power Consumption
Below 400W(With HDD)
H×W×D
133.2mm×446.0mm×493.0mm
Installation Mode
Standard 19-inch rack installation
Net Weight （Without HDD）
30kg
Environments Requirements Working Environment Temperature
0℃～40℃
Working Environment
10%～80% (Non condensation）
21
Model
ESS5016D-R Humidity
Storage Environment Temperature
-20℃～70℃
Storage Environment Humidity
5%～90% (Non condensation)
Working Altitude
-60m～5000m
Model
ESS5024S
ESS5024S-R
System
Main processer
Multiple-core special storage 64-bit CPU
OS
Embedded LINUX OS
Power Mode
500W. Single power supplying mode. Support online update.
500W. 1+1 Redundancy-power supplying mode. Support online update.
Fan
Redundant dual ball bearing fan MTBF>100 thousand hours
Motherboard
Server(Support 7x24H work)
Storage
Default 4G. Max 8G.
Case
Self-developed case,
1.2mm extra-thickness hot-dip galvanized steel. Self-developed patent removable HDD bracket. SBB2.0 specifications compliance.
Setup Interface
WEB GUI
Storage Protocol
Storage Protocol
iSCSI,SAMBA,NFS,FTP
Video Capacity
Input Video
256-channel D1 128-channel 720P 64-channel 1080P
Data Management
HDD No.
24 HDDs. Support SAS/SATA HDD. Each HDD max supports 4T.
RAID Mode
RAID0/RAID1/RAID3/RAID5/RAID6/RAID10/RAID50/RAID60/JBOD one HDD/global hotspare HDD.
HDD Installation
Independent HDD bracket. Support HDD hot swap.
HDD Hotspare
Support global hotspare HDD and special hotspare HDD.
Disk Array Enclosure
Max 4-level cascade connection.
Network Port Management
Network Port
One 10/100/1000Mbps Ethernet port
Data Network port
Four 10/100/1000Mbps Ethernet ports. Support load balance and network adapter binding.
Specifications Dimensions
Power Consumption
AC 100V~240V ±10% 60Hz/50Hz
Whole Device Power Consumption
Below 500W(With HDD)

1.10.5 ESS5024S/ ESS5024S-R

ESS Series User’s Manual
Loading...
+ 86 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use