Dahua DH-IPC-K6-I Quick Start Manual

Dahua HD Mini Network Dome Camera Quick Start Guide

Version 1.0.0

Zhejiang Dahua Vision Technology Co., LTD

1

Welcome

Thank you for purchasing our Network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．Electrical safety

 All installation and operation here should conform to your local electrical safety codes.
 Please check if the power supply is correct before operating the device.
 The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the

Limited power source is rated DC 12V or AC 24V in the IEC60950-1. (Power supply
requirement is subject to the device label).

 Please install easy-to-use device for power off before installing wiring, which is for emergent

power off when necessary.

 Please prevent the line cord from being trampled or pressed, especially the plug, power

socket and the junction from the device.

 Note: Do not connect these two power supplying sources to the device at the same

time; it may result in device damage!

 We assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

 We are not liable for any problems caused by unauthorized modification or attempted repair.

2．Environment

 Please don’t aim the device at strong light (such as lighting, sunlight and so on) to focus;

otherwise it may cause overexposure (It is not the device malfunction), which will affect the
longevity of CCD or CMOS.

 Please transport, use and store the device within the range of allowed humidity and

temperature.

 Please don’t keep the device in a place which is wet, dusty, extremely hot, and extremely

cold and with strong electromagnetic radiation or unstable lighting.

 Please do not allow water and other liquid falling into the camera in case that the internal

components are damaged.

 Please do not allow rain or damp to the indoor device in case fire or lightning may occur.
 Please keep the sound ventilation in case of heat accumulation.
 Please pack the device with standard factory packaging or material with same quality when

transporting the device.

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

3. Operation and Daily Maintenance

2

 Please do not touch the heat dissipation component of the device directly in order to avoid

scald.

 Please do not dismantle the device; there is no component which can be fixed by users

themselves in the machine. It may cause water leakage or bad image for the device due to
unprofessional dismantling. Please contact after-sale service to replace desiccant if it
becomes green.

 It is recommended to use the device with thunder proof device in order to improve thunder

proof effect.

 The grounding holes of the product are recommended to be grounded to further enhance the

reliability of the camera.

 Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean

the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away
the dust gently if it is necessary to clean.

 Always use the dry soft cloth to clean the device. If there is too much dust, please use the

water to dilute the mild detergent first and then use it to clean the device. Finally use the dry
cloth to clean the device. Don’t use volatile solvent like alcohol, benzene, thinner and etc or
strong detergent with abrasiveness, otherwise it will damage the surface coating or reduce
the working performance of the device.

 Dome cover is an optical device, please don’t touch or wipe cover surface directly during

installation and use, please refer to the following methods to deal with once dirt is found:

 Stained with dirt
 Use oil-free soft brush or hair dries to remove it gently.
 Stained with grease or fingerprint
 Use soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton cloth

or paper soaked with alcohol or detergent to wipe from the lens center to outward. It is ok to
change the cloth and wipe several times if it is not clean enough.

Warning

 Please modify the default password after login in order to avoid being stolen.
 Please use the standard accessories provided by manufacturer and make sure the device is

installed and fixed by professional engineers.

 Please prevent the device surface from the radiation of laser beam when using laser beam

device.

 Please do not provide two or more power supply modes for the device, otherwise it may

cause damage to the device.

Statement

 Please refer to the actual product for more details; the manual is just for reference.
 The manual will be regularly upgraded according to the product update; the upgraded

content will be added in the manual without prior announcement.

3

 Please contact the supplier or customer service if there is any problem occurred when using

the device.

 Please contact the customer service for the latest procedure and supplementary

documentation.

 There may be deviation between the actual value of some data and the value provided in the

manual due to the reasons such as the real environment is not stable and so on. Please
refer to the company’s final explanation if there is any doubt or dispute.

 The company is not liable for any loss caused by the operation which is not followed by the

manual.

FCC Information

1. FCC conditions：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

 This device may not cause harmful interference;
 This device must accept any interference received, including interference that may cause

undesired operation.

2. FCC compliance：
This equipment has been tested and found to comply with the limits for a digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Note:

Please refer to the disk for more details, check and download corresponding user’s manual and
tool.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.

Accessory Name

Amount

Network Camera Unit

1

Installation Accessories bag

1

Quick Start Guide

1

CD

1

4

Table of Contents

1 Device Structure ............................................................................................................... 5

1.1 Components ........................................................................................................ 5

1.2 Dimensions .......................................................................................................... 7

2 Installation ......................................................................................................................... 8

2.1 Device Installation .............................................................................................. 8

3 Network Configuration ................................................................................................... 11

3.1 Modify IP Address ............................................................................................ 11

3.2 Login WEB Interface ........................................................................................ 13