700 TVL IR Fixed Analog Camera with Zoom Lens
User’s Manual
Version 1.0.0
i
Table of Contents
1 General Introduction ..................................................................................................................1
1.1 Overview........................................................................................................................1
1.2 Features.........................................................................................................................1
1.3 Functions .......................................................................................................................1
1.4 Specifications................................................................................................................2
2 Framework...................................................................................................................................5
2.1 Product Dimension.......................................................................................................5
2.2 Bracket Dimension .......................................................................................................5
2.3 Lens and Cable Introduction.......................................................................................6
3 Installation ...................................................................................................................................8
4 Menu.............................................................................................................................................9
4.1 Main Menu List .............................................................................................................9
4.2 Menu Note ...................................................................................................................10
Appendix Toxic or Hazardous Materials or Elements ...............................................................11
ii
Welcome
Thank you for purchasing our analog camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
iii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC (24V AC) in the IEC60950-1.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
If this product is installed in the ceiling, please make sure the installation position can sustain the min
50N.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series camera should be installed in a cool, dry place away from direct sunlight or strong light,
inflammable, explosive substances and etc.
The working temperature ranges from -30℃ ~ to +60℃. Please keep it away from the electromagnetic
radiation object and environment.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
iv
Use the dry soft cloth to clean the device.
If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
1
1 General Introduction
1.1 Overview
This series analog camera adopts the high sensitivity CCD and advanced circuit design. It is featuring
the high quality video, the lowest distortion, low noise and etc. This series product is suitable to be
used in surveillance system and video process system.
1.2 Features
z High-performance SONY CCD, high resolution, vivid and impressive video.
z Support auto day/night mode switch to realize the monitor both in the daytime and at night.
z Support auto white balance function. Restore high definition and more reliable video.
z The auto electronic shutter is suitable for various surveillance environments.
z Support auto electronic gain control, self-adaptive brightness.
z High signal to noise ratio (SNR), clear and impressive video.
z Support privacy mask, backlight compensation, and ATR.
z Support IR function.
z Default zoom lens（provided）, monitor distance is adjustable.
z IP66 waterproof compliance, high reliability.
z OSD (on-screen display) support various languages such as English.
1.3 Functions
OSD
User-friendly on-screen display for you to select the different functions.
High Definition
700 TVL
540TVL 700TVL
IR function
This series product can use the IR light to allow you to see the object or realize the monitor in the low
illumination environment.
2
General Camera IR Camera
ATR (Adaptive Tone-curve Reproduction)
ATR (Adaptive Tone-curve Reproduction) function allows the camera to digitally calculate the video
color again and then adjust the brightness to enhance the video quality. This function can effectively
enhance the color and black zone of the video when there is sharp light contrast in the environments.
General Camera ATR Camera
1.4 Specifications
Please refer to the following sheet for specification.
Model
Parameter
CA-FW480P/N(-A)
Video Processor 1/3" SONY EXview HAD CCD Ⅱ
Video Format PAL/NTSC
Effective Pixel
PAL:
976(H)*582（V）
NTSC:
976(H)×494（V）
Resolution 700TVL
Min Illumination Color:0.02Lux/F1.2 (0Lux IR light on)
3
PAL
Auto: 1/50s~1/100,000s
Manual: 1/50s,1/120s,1/250s,1/500s,1/1000s,1/4000s,1/10,000s, 1/100,000s
Electronic Shutter
NTSC
Auto: 1/60s~1/100,000s
Manual: 1/60s,1/100s,1/250s,1/500s,1/1000s,1/4000s,1/10,000s, 1/100,000s
Lens Type
4.9mm zoom lens/2.8mm-12mm zoom lens is optional.
Accessories
Default accessories is internal cable exit bracket
Day/Night Switch
Auto
Video Output
1Vp-p Composite Output (75 Ohm/BNC)
SNR
Above 65 dB(AGC OFF)
IR Distance
Max 30m
OSD Menu Control Support
LENS Auto/Manual
SHUTTER/AGC Auto/Manual
WHITE
BALANCE
ATW/ ANTI CR /manual/push lock/push/user 1/user 2
HLC/BLC Off/BLC/HLC(High light compensation )
PICTURE
ADJUST
Mirror/brightness/contrast/sharpness/hue/gain
ATR Off/luminance/contrast
MOTION
DETECT
Detect sensitivity/block display/area selection
PRIVACY
MASK
Area selection/color/transparent/mosaic
DAY/NIGHT
MODE
Auto/black and white/color
NR Level/Y level/C level
SYNC INT
Camera ID Character/position
OSD
Language English/Japanese and etc
Waterproof Level IP66
Working Temperature
-30℃~+60℃
Power DC12V±10%
（-A） series product support AC24V±10% ∕DC12V±10%
Power Consumption
7.5W Max
4
Dimension(mm)
202.0×83.9×82.7
Weight
650g
5
2 Framework
2.1 Product Dimension
Please refer to the following figure for the dimension information. The unit is mm. See Figure 2-1 and
Figure 2-2.
Figure 2-1
Figure 2-2
2.2 Bracket Dimension
Please refer to the following figure for bracket chassis dimension information. The unit is mm. See
Figure 2-3.
Figure 2-3
6
2.3 Lens and Cable Introduction
The lens interface is shown as in Figure 2-4.
Figure 2-4
Please refer to the following sheet for detailed information.
SN Name Function
1 IR light It is to send out the IR compensation light to
enhance the night vision.
2 / Device lens.
The cable interface is shown as in Figure 2-5.
Figure 2-5
Please refer to the following sheet for detailed information.
SN Name Function
1 Power input port Connect to the DC 12V power to input the power.
2
Video output
port
BNC port is to output analog video signal.
You can connect to the devices such as the DVR
or the NVR
Please refer to Figure 2-6 for the second video cable connection interface.
7
Please remove the secure screws, enclosure, and front cover and then connect the second video
cable (provided) to the second video port. Now connect to the corresponding device, you can view the
video. At the same time, you can use the menu button to implement the menu operation. You can refer
to Figure 2-6 for detailed information. There are four direction buttons:up/donw/left/right and there is a
OK button (confirm) button in the middle.
Figure 2-6
8
3 Installation
Step 1
Dig three holes in the wall (or ceiling) and then insert the three expansion bolts into the holes. Fix
these bolts.
Figure 3-1
Step 2
Line up the three screw holes at the bottom of the pendent bracket to the three installation holes you
just dug in the wall (or ceiling). Insert the three screws into the three holes of the bracket (at the
bottom). During the process, you need to loosen the M4 pinching screw of the bracket to adjust the
camera angle so that you can secure the device on the wall or the ceiling. See Figure 3-2.
Figure 3-2
Step 3
Connect the device video output port to the terminal devices such as the DVR, NVS and etc. Then
connect the power cable to the device.
Now you have completed dome camera installation and cable connection.
You can use the terminal devices such as the DVR, NVS and etc to view the monitor video.
9
4 Menu
4.1 Main Menu List
Please refer to the following sheet for menu information.
THE 1st MENU THE 2ND MENU
TYPE
DC
,VIDEO
MODE AUTO.
ON,
OFF
AUTO
SPEED
0-255
LENS○1
MANUAL
HIGH
LUMINANCE
MODE SHUTTER
+AUTO
IRIS
,
AUTO IRIS
BRIGHTNESS 0~255
LOW
LUMINANCE
MODE AUTO
GAIN,
OFF
AUTO
BRIGHTNESS ×0.25~×1.0
0
MODE SHUTTER
+AGC
SHUTTER 1/50~1/100
,000
SHUTTER
AGC
MANUAL
AGC 6.00~44.80
B-GAIN 0~255
USER1
R-GAIN 0~255
B-GAIN 0~255
USER2○
2
R-GAIN
0~255
ANTI CR
MANUAL
LEVEL 021~034
PUSH
PUSH
LOCK
SPEED 0~255
DELAY CNT 0~255
ATW FRAME
×0.50~×2.0
0
WHITE
BALANCE
ATW
ENVIRON
MENT
INDOOR
OUTDOOR
OFF
BLC
BACKLIGH
T
HLC
MIRROR
ON,OFF
BRIGHTNESS
0~255
CONTRAST 0~255
SHARPNESS 0~255
HUE
0~255
PICT
ADJUST
GAIN
0~255
ATR
ON
LUMINANCE
LOW
MIDDLE
HIGH
THE 1st MENU THE 2ND MENU
ON
CONTRAST
LOW ,
MIDLOW,
MID,
MIDHIGH,
HIGH
ATR
OFF
DETECT
SENSE
000~127
BLOCK
DISPLAY
ON/OFF/SET
MONITOR
AREA
ON
OFF
AREA SEL 1/4~4/4
TOP 000~288
BOTTOM 000~288
LEFT 000~468
ON
RIGHT 000~468
MOTION
DETECT
OFF
AREA SEL 1/8~8/8
TOP 000~288
BOTTOM 000~288
LEFT 000~468
RIGHT 000~468
COLOR 1~8
TRANSPAR
ENT
0.00~1.00
ON
MOSAIC
ON,
OFF
PRIVACY
MASK
OFF
BURST
ON
,OFF
DELAY
CNT
000~255
DAY→NIGH
T○3
000~255
AUTO
NIGHT→DA
Y○
4
000~255
BURST
ON
,OFF
IR AUTO
COMPENSA
TION
ON
,OFF
MODE AUTO,FIXED
B/W
LEVEL
000~031
DAY/NIGH
T
COLO
R
NR
MODE
OFF,Y/C,Y,C
Y LEVEL 000~015
NR
C LEVEL 000~015
SYNC INT
ON
CAMERA
ID○5
OFF
LANGUAG
E ○6
ENGLII
SH,JA
PANE
10
SE
AND
ETC
CAMERA
RESET
4.2 Menu Note
○1 : The different series products support various lens. Please refer to the specifications for detailed
information.
○2 : The user2 setup is the same with the user1.
○3 ○4 ：In day-night mode, the smaller the value is, and the hard for the camera to switch to the black
and white mode. In night-day mode, the larger the value is, and the hard for the camera to switch to
the color. Here we recommend the default value. If the system switches back and forth when you are
using, please set the value in night-day mode larger and the value in the day-night mode smaller.
○5
：CAMERA ID
CAMERA ID
0001
A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z 0 1 2 3 4 5 6 7 8 9 —！”# $ % & ’
（）_‵，￥：；< = >?@﹨^*. ×＋⁄
CHR1 CHR2
←→↑↓ CLR POS
RETURN
CHR1: Library 1.
CHR2: Library 2.
←→↑↓: Select the character you want to modify.
CLR: Clear current character.
POS : Select it to go to the camera mask position interface.
○6：The parameter includes: English, French, German, Russian, Portuguese, Spanish, Chinese and
Japanese. The default setup is English.
Important
After you completed the setup, please click the “SAVE ALL” button to save current setup and then exit
the menu. It is to guarantee the camera setup after the power failure.
11
Appendix Toxic or Hazardous Materials or Elements
Toxic or Hazardous Materials or Elements
Component
Name
Pb Hg Cd Cr VI PBB PBDE
Circuit Board
Component
○ ○ ○ ○ ○ ○
Device
Construction
Material
○
○ ○ ○ ○ ○
Wire and Cable
○
○ ○ ○ ○ ○
Packing
Components
○ ○ ○ ○ ○ ○
Accessories ○ ○ ○ ○ ○ ○
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the
parts is below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the
environmental-friendly use period (EFUP) period, the toxic or hazardous substance or elements
contained in products will not leak or mutate so that the use of these (substances or elements) will not
result in any severe environmental pollution, any bodily injury or damage to any assets. The consumer
is not authorized to process such kind of substances or elements, please return to the corresponding
local authorities to process according to your local government statutes.
Note
• This manual is for reference only. Slight difference may be found in the user interface.
• All the designs and software here are subject to change without prior written notice.
• All trademarks and registered trademarks are the properties of their respective owners.
• If there is any uncertainty or controversy, please refer to the final explanation of us.
• Please visit our website or contact your local service engineer for more information.
Loading...