Dahua ASC1204B-S User Manual

1

Four-Door Access Controller User’s Manual

V1.0.2

Table of Contents

1 Overview ................................................................................................................................. 1

2 Device Appearance ................................................................................................................. 2

3 Device Installation and Uninstallation .................................................................................... 3

3.1 Device Installation ............................................................................................................... 3

3.2 Device Uninstallation ........................................................................................................... 4

4 Port………………. ........................................................................................................................ 6

4.1 Port ...................................................................................................................................... 6

4.2 Cabling ................................................................................................................................. 7

4.3 System Structure ................................................................................................................. 9

5 Technical Specification ......................................................................................................... 11

Important Safeguards and Warnings

Please read the following safeguards and warnings carefully before using the product in
order to avoid damages losses and body injurie s. After reading, please well keep this user 's
manual.
Note:

 Please change user default pas sw or d after being armed.

 Do not install the device at position exposed to sunlight or in high temperature.

Temperat ur e r ise in device may cause fire.

 Do not expose the device to lampblack, steam or dust. Otherwise it may cause

fire or electric shock.

 The device must be insta lled on solid and flat surface in or der to guarant ee safet y

under load and earthqua ke. O therw ise, it may caus e dev ice to f all o f f or turno v er.

 Do not drop or splash liqui ds onto the device, and do not place conta iner with full

liquid on the device t o pr event liquid spilling from entering the device.

 Do not block air vent of the device or ventilation around the device. Otherwise,

temperature in device will rise an d m ay cause fire.

 Use the device only within rated input and out put range.
 Do not disassemble the device without pr ofessional instruction.

 Please transport, use and store the product under appropriate temperature and

humidity.

Warning:

 Please use battery pr operly to avoid fire, explos ion a nd other dangers.
 Please replace used bat tery with battery of the same type.

 Do not use power line other than the one specified. Please use it properly within

rated range. Otherwise, it may cause fire or electric shock.

 Please use power supply matching SELV requirements, and IEC60950-1 Limited

Power Source. Power supply shall follow requirement s on device label.

 For I-type structure product , connect it to pow er sup ply plug wit h GND protecti on.
 If you use power plug or appliance coupler as disconnecting device, please

maintain the disconnecting device available to be operat ed all the time.

Privacy Protection Notice

As the device user or data control ler, you might collect personal data of ot hers'
such as face, fingerprints, c ar plat e number, Email address, phone number,
GPS and so on. You need to be in compliance with the local privacy protect ion
laws and regulations to protect the legitimate rights and i nterests of other people
by implementing measure s inc lude but not limited to: prov iding clear and visible
identification to inform data subject the existence of surveillance area and
providing related contact.

About the Manual

 The Manual is for reference only. If there is inconsistency between the

Manual and the actual product , t he actual product shall prevail.

 We are not liable for any loss caused by the operations that do not comply

with the Manual.

 The Manual would be updated according to the latest laws and regulations

of related regions. For detailed information, see the paper User's Manual,
CD-ROM, QR code or our official website. If there is inconsistency between
paper User's Manual and the electronic version, the electronic versi on s hal l
prevail.

 All the designs and so ftware are subject to change w ithout prior written not ice.

The product updates might cause some differences between the actual
product and the Manual. Please contact the customer service for the latest
program and supplementa ry documentation.

 There still might be deviation in technical data, functions and operations

description, or errors in print. If there is any doubt or dispute, please refer to
our final explanation.

 Upgrade the reader software or try other mainstream reader software if the

Guide (in PDF format) cannot be opened.

 All trademarks, regist ered trademarks and the company names in the Manual

are the properties of their respective owners.

 Please visit our website, contact the supplier or customer service if there is

any problem occurred wh en using the device.

 If there is any unc ertainty or contr oversy , please refer to our final explanation.

1

1 Overview

The access controller is a controlling device which compensates video monitoring and
bidirectional talk. It has neat and modern design with strong functionality, suitable for
commercial building, corporation property and intelligent community.

It has:

 It adopts slideway and lock installation design for easy inst allation and repair.
 It integrates alarm, access control, video monitoring, fire alarm and control module

input.

 It supports 4 sets of card readers.
 It supports 9 groups of input signal (unlock button *4, door sensor *4, intrusion alarm

*1).

 It supports 5 groups of output cont r ol (electric lock *4, alarm output *1).
 RS485 port, may extend to connect to lift control module, alarm or household control

module. It may connect upper device via RS485.

 FLASH storage capacity is 16M (may extend to 32M), max supports 100,000 card

holders and 150,000 records.

 It supports illegal intrus ion alarm, u nlock overt ime alarm, f orced card al arm and force d

setup. It also supports black-w hite list and patrol card setup

 It supports setup of card period, password and validity. Guest card in additional has

setup of times of use.

 It supports 128 groups of schedul es, 128 groups o f perio ds and 128 gro ups of holiday

schedule.

 Data storage during outage, built-in RTC (support DST), online upgrading.