Dahle 20634EC Level 6
Cross Cut High Security
Paper Shredder
Instruction Manual
Page 2
00 SERIES
206
GENERAL OFFICE SHREDDERS
20606 S
20606 C
20606 EC
20612 C
20612 EC
20614 EC
20630 EC
20634 EC
Dahle North America, Inc.
375 Jaffrey Road
Peterborough, NH 03458
Tel: (603) 924-0003 • Fax: (603) 924-1616
Email: shredders@dahle.com
www.dahle.com
OPERATION MANUAL
20606.90.0830 – 01/04 –
Page 3
Congratulations on your purchase of a DAHLE Paper Shredder! We here at
R
DAHLE North America are dedicated to providing rugged and dependable
products for the large, and not so large office. We are sure your new DAHLE
Paper Shredder will meet or exceed your expectations of quality and service
If you have any questio ns regarding your new DAHLE pa per shredder, call your
sales representative, or c all DAHL E N.A. C us tomer Service, toll free, at ( 80 0) 9951379 between 8:30 am and 5:00 pm Monday through Friday, EST.
Check off the model an d record the serial number for your records in the space
provided below.
❏ 20606 S ❏ 20606 C ❏ 20606 EC ❏ 20612 C ❏ 20612 EC
❏ 20614 EC ❏ 20630 EC ❏ 20634 EC
Serial Number: __________________________
DIAGRAM KEY
1. Main Plug
2. Feed Opening
3. Light Barrier
4. Bag Full Indicator
5. Door Ajar Indicator
6. Paper Jam Indicator
7. Forward Switch (electr o nic mode ls )
7a. Reverse Switch (electr on ic mode ls )
8. Power Switch (electronic models)
8a. On/Off/Reverse (manual models)
9. Shred Bag
10. Waste Bin
11. Door Handle
12. Door
BEFORE YOU CALL FOR SERVICE
SYMPTOM POSSIBLE CAUSES SOLUTION
No Power
Low capacity
1. ON/OFF Switch set to
wrong position
2. Unit unplugged Connect to outlet
3. Outlet dead Reset circuit breaker
4. Door not fully closed Close Door
5. Waste Bin full Empty Waste Bin
1. Cutting blades dry Lubricate cutting blades
Move Switch to “I” (on)
position
according to instructions.
DAHLE SHREDDER SUPPLIES AND ACCESSORIES
Shred Bags
Item No. Models 701 Personal & 20300 Series
704 20400, 20500 & 20600 Series
705 20800 Series
706 High Capacity Models
(100 per box)
Waste Bin
605 20600 Series
Shredder Oil (All Models)
740 Box of 4 16oz. Bottles
740G Box of 4 1gal Bottles
740G/1 1 gallon bottle
Automatic Oiling System
SAO-120 4Liter AutoOiler
READ ALL INSTRUCTIONS BEFORE OPERATING YOUR SHREDDE
IF ANY OTHER PROBLEMS OCCUR. CALL YOUR AUTHORIZED DAHLE SERVICE DEALER
Page 4
CHANGING THE SHRED BAG
When the Shred Bag (1 0) i s f ull, the shredder will auto matically shut down. On th e
electronic models an LED indicator will light and an audible alarm will sound.
Changing the Shred Bag is quick and easy if you follow these simple directions.
1. Turn shredder off
2. Open Door (12) using Door Handle (11) t o exp ose Waste Bin (10) and Shred
Bag (9).
3. Pull the Waste Bin and full Shred Bag out of the shredder.
4. Dispose of full Shred Bag.
5. Install ne w Shred Bag in Waste Bin, drapin g end of Shred Bag over edge of
Waste Bin.
6. Push Waste Bin, with new Shred Bag installed, back into shredder.
7. Close Door.
8. Turn on shredder and continue shredding.
CARING FOR YOUR SHREDDER
Clean covers with a clean dr y cloth. Do not use water or solvents. Mak e sure you
disconnect your shredder from its power source before cleaning.
Paper shredders, like all mechanical equipment, need proper maintenance to
ensure efficient oper ation. Peri odic lu brication of the c utting bla des is im portant t o
offset the friction ge nerated within the cutting hea d. Frequency of lubrication will
vary depending on the s hred size and the amount of usage. A strip-cut shr edder
receiving light use (1 – 2 hours per week) will require lubrication only once or
twice a month, while the same machine used 1 – 2 hours per day will require
lubrication weekly. A cross-cut shredder should be lubricated every ½ hour of
shredding time to maintain maximum capacity and efficiency.
The procedure for lubricati ng your shredder is simple, and can be perform ed by
any operator. The oil is pack aged in a sque eze bot tle and is appl ied direc tl y to the
cutting blades through the f eed opening (3). Run a fine stream of lubricant fr om
one side of the feed ope ning to the other. Run the shredder in REVERSE for a
few seconds to help distribute the lubricant evenly. You can now continue
shredding as usual.
DAHLE Shredder Oil is the only lubricant you should use in your paper shredder .
It has been specially form ulated so as not to leave any resid ue that could attract
dust and clog the shredding mechanism. You can order DAHLE Shredder Oil
(item # 740) from your local dealer.
Repairs on your paper shredder should only be performed by qualified
technicians. If you need service, contact your local dealer, or you can contact
DAHLE North Americ a Customer Service between 8:30 am and 5:00 pm EST at
(800) 995-1379.
NOTE: SHREDDER WILL NOT OPERATE U NLESS DOO R IS CO MPLETELY CL OSED
SAFETY INSTRUCTIONS
• Read the operating instructions carefully before operating your shredder!
• Do not use in the vicinity of flammable liquids or gases.
• Do not use in the vicinity of corrosive materials.
• Do not expose to water or wet conditions.
• Do not let children operate this, or any other, office equipment.
• Do not reach into th e cutting mechanism during operation - not even from
the top or with objects.
•Do not operate the shredder f or a period of more than 5 minutes in no-load
operation (operation without paper).
• Keep hair clear of machine.
• Keep neckties clear of machine.
• Keep bracelets, or any other jewelry, clear of machine.
• Power connection must be accessible at all times.
• Disconnect from power supply before servicing.
• The safety devices must not be disabled or removed.
BEFORE YOU SHRED
• Remove Transport Bolts with wrench pro vid ed.
• Record the Model an d Serial N umber in the spac e pro vided ins ide the f ront
cover.
•Be sure the electrical outlet provides the proper power for your shredder
(see rating label on rear of shredder).
•Install Shred Bag (see: “CHANGING THE SHRED BAG”).
TURNING ON YOUR SHREDDER
20606 S ◆ 20606 C ◆ 20612 C
1. ON, OFF and REVERSE are controlled by the black
Rocker Switch (8a) on the top of the shredder.
2. Moving the switch to the “I”(ON) position activates the shredding mechanism.
3. Moving the switch to the center or “O” (OFF)position turns the shredderoff.
4. The REVERSE position “R” will be discussed in “CLEARING A PAPER JAM”.
ALWAYS TURN SHREDDER OFFIF IT WILL BE UNATTENDED FOR LONG PERIODS OFTIME
1. ON/OFF is controlled by the green push button (8)
found on top of the shredder.
2. Pressing this button turns the shredder on
and places it in the stand- b y mode.
3. Pressing the button again turns the
shredder off.
SHREDDING
20606 S ◆ 20606 C ◆ 20612 C
Turn shredder on. Insert paper squarely into
Feed Opening (3). Continue feeding paper into
Feed Opening until the shredding mechanism
begins to draw the paper in. At this point,
allow the paper to feed into shredder on its
own. When shredding is complete, turn
shredder off.
Turn shredder on. Insert paper squarely into
Feed Opening (3). A light barrier will automatically activate the shredding mechanism.
Continue feeding paper into the Feed Opening
until the shredding mechanism begins to
draw the paper in. At this point, allow the paper
to feed into the shredder on its own. Once the
paper has passed completely through the shredding mechanism, the electronic
controls will automatically stop the machine.
To shred a piece of paper too small to break the light barrier, press the
FORWARD button (7) once to o verride the auto ON/OFF f unction. The shredder
will continue to run until the FORWARD button is pressed again.
Microfiche and transparencies can also be shredded in the same manner as
paper, however, you should s hred a piece of paper after ever y 8 or 10 sheets of
plastic. This helps clean plastic particles out of the shredding mechanism.
CAPACITY
Capacity is the number of sheets of 8½” x 11” paper that can be shredded at on e
time. These figures are approximate and machines may vary slightly due to
various conditions. It is not recommended that you try to run your shredder at
maximum capacity, as this increases the chance of a paper jam.
If too many sheets of paper are f ed into your shredder at one t im e, it m ay cause a
paper jam. Running your s hredder at maximum c apacity increases the chanc e of
a paper jam. If a paper jam occurs, it is easy to clear by following thes e simple
steps:
20606 S ◆ 20606 C ◆ 20612 C
1. Turn shredder off using ON/OFF/REVERSE switch (8a).
2. Firmly pull on paper sticking out of Feed Opening while holding
ON/OFF/REVERSE switch in the REVERSE (R) position.
3. After paper has been removed from the Feed Opening, move the
ON/OFF/REVERSE switch back to the ON (I) position.
4. Separate some of the sheets and continue shredding.
The Auto-Reverse feat ure, built into the elec tronic versions of the G eneral Office
Shredders, helps prev ent paper jam s. If the Auto-Reverse f eature is activated an
audible alarm sounds and the Pa per Jam Indicator (6) lights up. If this situatio n
occurs, follow these simple steps:
1. Remove paper from Feed Opening. The REVERSE button (7a) may be used
if excess paper rem ains in the Feed Opening. Clear shredding mechanism
by pressing the FORWARD button (7).
2. Separate some of the sheets and continue shredding.
REMEMBER TO LUBRICATE YOUR SHREDDER ACCORDING TO INSTRUCTIONS
IT IS NOT RECOMMENDED RUNNING SHREDDERSAT MAXIMUMCAPACITY
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.