Dahle 10420-15194 User Manual
828 HD
®
PAPER & HARD DRIVE SHREDDER
Operating
Instructions
Dahle 828HD
TABLE OF CONTENTS
®
CONTENTS PAGE
Safety Precautions................................................................................................................................3-4
Installation .................................................................................................................................................. 4
Operation ................................................................................................................................................ 5-6
Maintenance .............................................................................................................................................. 7
Warranty ...................................................................................................................................................... 7
Troubleshooting .......................................................................................................................................8
READ CAREFULLY BEFORE USING
Proper care of your new shredder will ensure many years of trouble free operation,
with minimum of maintenance or repair.
IMPORTANT:
Please note that all packaging should be retained by the customer for (30) days from
the time of receipt. In the event that this unit needs to be sent back for replacement
or repair this packaging will be required to do so. Should the packaging have been
discarded before the (30) day requested period, packaging costs may be incurred by
the customer.
SPECIFICATIONS
828 HD
PAPER & HARD DRIVE SHREDDER
PAPER HARD DRIVE
Security Level: P3
Shred Size: 5mm X 70mm 40mm X 40mm 90mm
Feed Width: 12”
Shred Capacity: 80100 sheets
Bin Capacity: 30 gal. 26 gal.
Warranty: 1 year
Dimensions: 38.25” X 33.5” X 46.5”
Weight: 1,257 lbs.
Power Supply: 220v 3 phase, 20 amp
N EM A L152 0 P Plug, L1520 RReceptacle
Results may vary depending on power source, paper type, and proper maintenance.
Warranty includes labor but excludes wearable parts.
H4
4.75”
2
IMPORTANT SAFETY PRECAUTIONS
Your new shredder features powerful cutting mechanisms that may cause serious
injury. Please follow all safety precautions.
• Only store, transport, and operate the shredder in an upright position!
• All liquids and gases used on the shredder must comply with Dahle guidelines!
• The shredder must only be operated in enclosed spaces at temperatures of 15 °C to
32 °C(59 °F–90 °F) and non-condensed humidity of 15% to 95%!
• Do not place the shredder near a heat source!
• Ensure the shredder is rmly on the oor at a distance of 4” from the wall; activate
caster locks!
• Avoid any accumulation of heat!
• The mains socket must be grounded and easily accessible at all times!
• Use only the power cord supplied with the device by Dahle and ensure that it is not
damaged!
• Ensure that the building installation has short-circuit protection: max. 16 A (US
max. 20 A)!
• Do not use near ammable liquids and gases!
• Do not use near caustic substances!
• Do not subject to moisture!
• Do not open up the machine!
• Automatic start-up!
• Switch o the shredder at the main switch when not in use!
• Only use the shredder provided that it is in perfect working order, while observing
the operating instructions and the usual regulations, guidelines and applicable
safety and accident prevention requirements. Take the shredder out of service
immediately if faults occur!
• The device is not intended for use by persons (including children) with restricted
physical, sensory or mental capabilities or a lack of experience and knowledge, unless they are working under supervision or receive detailed instruction about how
to use the device from a person who is responsible for safety.
3
Loading...