Daffodil AMC530 User Manual

Daffodil

User Manual

AMC530

Digital Alarm Clock

Réveil Numérique

Digitaler Wecker

Orologio sveglia digitale

Reloj despertador digital

Digital Daffodil Ltd

www.digitaldaffodil.com

-2-

English

4.2 Functions

Installing the batteries

Setting the time and date

Setting the alarm clock

Open the battery compartment, on the bottom of the device, and insert the 2 supplied
AAA batteries. The AMC530 will beep and the LCD display will activate upon correct
insertion. Replace the battery cover.

When the time is displayed on the LCD screen, press SET to start adjusting the time
and date. The UP and DOWN buttons change the flashing value and the SET button
cycles through the adjustable values in this order: hour – minutes – year –month – day .
Press the mode button to finalise your settings and return to clock mode. The device
will automatically return to clock mode after a minute's inactivity.

First select alarm mode. The mode button switches between clock mode and alarm
mode, alarm mode is indicated by a bell on the left hand side of the LCD screen and
whilst in clock mode, the colon between the hour and minute display flashes. Press
the UP button to select from the following alarm modes:

MODE

SET

RESET
°C/°F/DOWN

Battery compartment

UP

LCD display

1. Introduction

Thank you for purchasing this product. This user manual will help you to familiarise
yourself with all the features of your new device, so please do take the time to read it
thoroughly.

The AMC530 is a stylish battery-powered alarm clock, thermometer and calendar with
a transparent LCD display.

Calendar with date and day display
Thermometer in Celsius (°C) or Fahrenheit (°F)
Adjustable snooze function: 1-60 minutes
8 selectable alarm tones
Stylish design with transparent LCD display
Powered by 2xAAA batteries

Digital alarm clock
2 xAAA batteries
User manual

4. Parts & Functions

2. Main Features

3. Package content

Digital clock with 12 or 24 hour display

User manual

-1-

-3-

1 “(((o)))”, Single alarm
2 “ZZ” Alarm with snooze
3 “blank” No alarm

Press SET to start adjusting the alarm time. The UP and DOWN buttons change the
flashing value and the SETbutton cycles through the adjustable values in this order:
hour, minutes, snooze duration (settable from one minute to one hour in 1 minute
intervals). Press the mode button to finalise your settings and return to alarm mode.
The device will automatically return to alarm mode after a minute's inactivity.

Time Formats 12 and 24 hour

Alarm Modes Single / Snooze Repeat

Alarm Tones 8 settable tones

Temperature Formats °C / °F

Battery Type 2 x AAA

5. Specifications

Please note the above instructions are only intended for reference purposes.
Digital Daffodil Ltd reserves the right to revise product specifications, features and
design without notice.

For any further enquiries, please telephone Digital Daffodil Ltd's helpline on
[phone] or email [e-mail]