Daewoo Electronics FR-024RBE Owner's Manual

RREEFFRRIIGGEERRAATTOORR

FR-024RBE

W ARNING / SAFETY PRECAUTIONS

Do not plug several appliances into the same sockets.

• This could cause overheating and the risk of fire.

Keep the power plug away from the rear of the
appliance.

• A damaged power plug may cause fire due to overheating.

Do not directly spray water inside or outside the
appliance.

• There is a risk of fire or electric shock.

Do not spray water inside or outside the appliance.

• There is a risk of explosion or fire.

Do not bend the power cord excessively or place heavy
articles on it.

• This constitutes a fire hazard. If the power cord is
damaged, have it replaced immediately by the
manufacturer, its service agent or a similarly qualified
person.

Do not insert the power plug with wet hands.

• You may receive an electric shock.

Do not put a container filled with water on top of the
appliance.

• If the water spills on to any electrical parts, it may lead to
fire or electric shock.

Do not install the appliance in a damp place, where it
could be splashed with water.

• Incorrect insulation of the electrical parts may cause an
electric shock or fire.

Do not store volatile and flammable substances in the
appliance.

• The storage of benzene, thinner, alcohol, ether, LP gas or
other such substances may cause an explosion.

Do not disassemble, repair or alter the appliance.

• It may cause fire or abnormal operations, which may lead
to injury.
Pull the power plug out of the socket before replacing the
interior light in the appliance.

To avoid any risk of personal injury, material damage or incorrect use of the appliance, be sure to observe the following
safety precautions. (After reading these owner’s instructions, please keep them in a safe place for reference).
Remember to hand them over to any subsequent owner.

• Otherwise, there is a risk of electric shock.

• Only the customer service may change the power cord

and carry out any other repairs. Improper Installations
and repairs may put the user at considerable risk.

Be sure to earth the appliance.

• Otherwise, it may cause material damage and electric
shock.

If you wish to dispose of the

appliance

, throw it away

after removing the door or its seals.

• In this way, it is not possible for a child to remain
trapped inside it.

Keep ventilation openings in the appliance
enclosure or in the built-in structure, clear of
obstruction.

Do not use mechanical devices or other means to
accelerate the defrosting process, other than
those recommended by the manufacturer.

Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food

storage compartments of the appliance, useless
they are of a type recommended by the
manufacturer.

1

WARNING

WARNING

CAUTION

Indicates that a danger of death or serious
injury exists

Indicates that risk of personal injury or
material damage exists

2

Do not store too much food in the appliance.

• When you open the door, an item may fall out and cause
personal injury or material damage.

Do not put bottles or any kind of glass in the appliance.

• The container may break and cause personal injury.

If the wall socket is loose, do not insert the power plug.

• It may cause electric shock or fire.

Do not disconnect the power cord by pulling on it.

• You may disconnect a wire and cause a short circuit.

Do not store article on top of the appliance.

• When you open or close the door, the articles may fall and
cause personal injury or material damage.

Do not store pharmaceutical products, scientific
material or other temperature-sensitive products in the
refrigerator.

• Products that require strict temperature controls must not
be stored in the refrigerator.

Do not let a child hang from the door.
Remove any foreign matter from the power plug pins.

• Otherwise, there is a risk of fire.

Do not insert your hand into the bottom area of appliance.

• Any sharp edges may cause personal injury.

After unplugging the appliance, wait for at least five
minutes before plugging it again to the wall socket.

• Abnormal operation of the freezer may cause material
damage.

If the appliance is not be used for a long period of time,
pull out the power plug.

• Any deterioration in the insulation may cause fire.

Do not let children touch or play with the control panel
on the front of the appliance.

• Do not allow children to play with this appliance.

• Do not stand or lean on the base panel, pull-out parts, door

and so on.

• Repairs and maintenance of the appliance should only be

performed by a qualified technician.
Incorrect repairs by an unqualified person are a potential
source of danger that may have critical consequences for
the user of the appliance.

The refrigerant used in appliances and the gases
in the insulation material require special disposal
procedures.
Ensure that none of the pipes on the back appliance are
damaged prior to disposal.

1. Allow an adequate space and install the appliance on
a firm, level floor.

• If the appliance is not level, there may be unusual

noises and poor cooling.

2. Clean the appliance

• Wipe and clean the inside and outside of appliance with

a damp cloth.

3. Plug the appliance into a wall socket used
exclusively by this appliance.

• This appliance must be properly earthed.

4. Place the food in the appliance.

• It is recommended that you wait for the appliance to cool

for 3~4 hours before storing food in it.

5. Keep 60mm of space between the refrigerator and the
back wall.

• Insufficient space causes the noise of vibration,

weakening of refrigerating power and the waste of
electricity.

• Overall space required in use.

Refer to drawing and dimension as below.

6. The electrical plug must be accessible without
moving the set.

7. For ambient temperature below 10 °C, the perfect
performance of our refrigerator can not be achieved.

Caution Caution

Installing The Appliance

DISPOSAL

FR-024

10cm

10cm

3

If the front of the appliance is slightly higher than the rear,
the door can be opened and closed more easily.

LEVELING

To Prepare your appliance for use and check that it is
running correctly, take the following steps.

1. Install removed all shelves and compartments during
transport in the correct positions.

2. Clean the appliance and accessories to remove any dust
that accumulated during packing and shipping.

3. The interior light should be turned on when the appliance
door’s opened

4. Set the temperature control to the coldest temperature
and let the refrigerator operate for one hour.
The appliance should get slightly chilled and the motor
should run smoothly with a soft hum and no noise.
Your appliance is operated by a compressor which
switches “on and off” to maintain the internal temperature.
When compressor is new, it requires running in for a
period of up to five months.
During this period, it may be slightly noisy.
This is quite normal and does not represent a fault.

5. Store food once the temperature in the appliance is
sufficiently low. It takes a few hours after starting the
appliance to reach the proper temperature.
If the appliance does not operate correctly, check the
electricity supply.
If the problem persists, contact your dealer.

Preparing The Appliance

1. The appliance tilts down to the
left.

Turn the left adjusting leg in the
direction of the arrow until the
appliance is lever.

2. The appliance tilts down to the
right.

Turn the right adjusting leg in the
direction of the arrow until the
appliance is lever.

Use of an earthed socket exclusively
For the appliance :

• If you are using a socket with an earthed terminal, you do
not require a separate earthed connection.

Use of a non-earthed socket :

• Connect the “earthed wire” to the steel plate and bury it at
depth of at least 25cm in the ground.

Caution