Daewoo Electronics DWD-WD3011WW, DWD-WD3011RR Owner's Manual

IMPORTANT SAFETY GUIDE.................................................................2

PARTS AND FEATURES.........................................................................3

INSTALLATION INSTRUCTIONS............................................................ 4

INSTALLATION OF ACCESSORIES.......................................................8

OPERATING YOUR WASHER..............................................................10

USING THE DISPENSER.......................................................................12

THE FUNCTION OF CONTROL PANEL ..............................................14

WASHING PROGRAM...........................................................................16

WASHING PROCEDURE AND SELECTION....................................... 18

GUIDE FOR OTHER USEFUL PROGRAMS.......................................29

MAINTENANCE.......................................................................................32

HOW TO CLEAN THE FILTER..............................................................33

REMOVING STAINS............................................................................... 34

TROUBLE SHOOTING...........................................................................35

SPECIFICATION.....................................................................................36

As an E

NERGYSTAR

® partner,

DAEWOO has determined that this product meets the E

NERGY

TAR

® guidelines for energy

efficiency.

CONTACT INFORMATION Website : http://www.e-daewoo.com Call : 1-877-393-7823(1-877-DWESVC3)

■ Economic wash system

With artificial intelligence, the washer uses minimum energy and water by selecting optimal water level and washing time.

■ Low noise system

The washer minimizes the washing and spinning noises by sensing the amount of laundry.

■ Child-Lock

The Child-Lock system is adopted to prevent children from pressing any button to change the program during operation.

CONTENTS Page

A NOTE TO YOU

Thank you for buying a DAEWOO appliance. DAEWOO washers are easy to use, save time, and help you manage your home better. This manual contains valuable information about how to operate and maintain your washer property and safely. Please read it carefully.

Features

Washing Machine OWNER'S Manual

DWD-WD3011WW/RR, DWD-WD31WW

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

OPERATION INSTRUCTIONS

"WARNING - To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance." This statement is omitted when the operating instructions are preceded by the safety instructions and are included in the same manual.

Understanding your responsibilities when using the washer.

1. Do not use chlorine bleach ancd ammonida or acid(such as vingar or rust remover) in the same wash. Hazardous fumes can form.

2. Unplug power supply cord before attemping to service your washer.

3. Do not wash fiberglass material. small particles can stick to fabrics washed in following loads and cause skin irritation.

4. Do not spray water on the control panel of the washer. It could cause fire or an electric shock.

5. In case of the dual valve model, If you connect only cold water inlet valve, while water temperature is selected as hot or warm, there can be water leakage form unconnected water inlet valve.

IMPORTANT SAFETY INSTR UCTIONS

SAVE THESE INSTRUCTIONS

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life

WARNING! - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions,

including the following :

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the washing or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls

8. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the usermaintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

11. Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

12. Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire

13. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

14. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

WARNING! -

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician

PARTS AND FEATURES

NOTE

The drawings in the book may vary from your washer model. They are designed to show the different features of all models coverd by this book, So your model may not include all the features.

Accessories

The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer.

INLET HOSE

(HOT, OPTION)

INLET HOSE (COLD)

POWER PLUG

DRAIN HOSE

ADJUSTABLE LEG

PUMP COVER

DOOR

DETERGENT CASE

CONTROL PANEL

Drain hose Inlet hose Wrench

Owner's Manual Cap holder (4EA) Pedestal (OPTION) Stacking Kit (OPTION)

❈Design of

pedestals is subject to change without manufacturers notice.

INSTALLATION INSTRUCTIONS

Removing transit bolts

1. Before operating the washer, remove the transit bolts(4ea) along with the rubber.

•If the bolts are not removed, it

may cause heavy vibration, noise and malfunction.

2. Unscrew the 4 bolts with the spanner supplied. Keep the 4 bolts and spanner for future use.

•Whenever the appliance is

transported, the transit bolts must be refitted.

3. Close holes with supplied cap holders.

Location of your washer

• Check location where the washer will be installed. Make sure you have everything necessary for correct installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Do not place or store laundry products on top of washer at any times.

• Install the washer on the horizontal solid floor. If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate severely and cause a malfunction. If the washer is not level, adjust leg up or down for horizontal installation.

• Ventilation openings must not be obstructed by carpeting when the washer is installed on a carpeted floor.

• Leave some space (right & left : 1 inch, rear : 4 inch).

• In case of built-in installation, the distance between top of the washer and bottom of upper plate should be at least 3mm.

Drain Hose

Washer

Laundry Tub

Approx.

1 inch

Level adjustment

① If the washer is installed on an unsuitable floor, it could make

considerable noise, vibrate and cause a malfunction.

② Adjust the level of washer using adjustable legs.

• Please check if there is any gap between the four adjustable legs and the floor.

• Turning adjustable legs by the enclosed spanner and adding UNIT LEVELER AS, adjust the level of washer and make it sure that there is no swaying of washer.

• After the adjustment is finished, turn the fixing nuts up tightly so that the washer maintains the adjustment.

③ Make it sure that the washer does not sway when

you press down the four corners of the washer's top plate.

NOTE

There should be no swaying of washer and all the adjustable legs should stick to the floor closely.

Fixing Nut

adjustable leg

Connecting water supply hose

• Water supply pressure must be between 4.5 and 145 PSI (30~1000 kPa).

• Do not crossthread when connecting inlet hose to the valve. If the water supply pressure is more than 145 PSI, a pressure reducing device should be installed.

• Two Sealing washers are supplied with the water inlet hoses to prevent water leaks.

• Check for leakage of washing machine connections by turning the tap completely on.

• Periodically check the condition of the hose and replace the hose if necessary.

• Make sure that there is no kink in the hose and that it is not crushed.

• Be sure that the two water input ports are connected to the correct water faucets. The connector for hot water is colored red.

Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center.

Do not install your washing machine in a room where temperatures below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below the freezing point

If the appliance is delivered in the winter months and temperatures are below freezing, store the washing machine at room temperature for a few hours before putting it into operation.

(Connect to the faucet)

(Connect to the water

valve of the washer)

Drain system

• Never forget to install drain hose before operating your washer.

• Open the packing box, and there is a drain hose inside the drum.

• Connect the drain hose to the drain outlet at the back side of the washer.

• Top of laundry tub must be at least 24 inches high and no higher than 40 inches from bottom of washer.

• When installing the drain hose to tub(sink), secure it tightly with a string.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• When the drain hose is too long, do not force it back into the washer. This will cause abnormal noise.

Electrical connection

• Do not use an extension cord or double adaper.

• If the supply cold is damaged, it must be replaced by a qualified person in order to avoida hazard.

• If the machine will not be used for an extended time, unplug it and shut off the water supply.

• Connect the machine to a grounded outlet in occordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accesible.

min. 24inch

max. 40inch

min. 24inch

max. 40inch

min. 24inch

max. 40inch

■Installation Clearances

• Washer dimensions

• The location must be large enough to fully open the washer door.

• Most installations require a minimum clearance.

Sides - 1 in(2.5cm) Rear - 4 in(10.2cm) Top - 32 in(81.3cm)

• Additional spacing should be considered for installation and servicing.

• Companion appliance spacing should also be considered.

■Minimum clearances for closet

installation

• Closet installations require a minimum clearance. Sides - 1 in(2.5cm) Rear - 1 in(10.2cm) Top - 32 in(81.3cm)

Positioning the washer

(

)

(

)

(

)

[Front view]

[Closet V entilation]

40.9"

(104cm)

40.1 (102cm)

31.8

27"

(68.6 cm)

(80.9cm)

(7.6cm)

48 in.

(310 cm2)

24 in.

(155 cm2)

(7.6cm)

32"

(81.3cm)

2.5 cm

27"

68.6 cm

2.5 cm

■ Level floor

• Allowable slope under entire washer is 1°.

• To minimize noise and vibration, the washer MUST be installed on a solidly constructed floor.

• Carpeting and soft tile surfaces are not recommended.

• Never install the washer on a platform or weakly supported structure

NOTE: A firm, solid floor is even more critical to a

front-loading washer than to a top-loader. If your floor is wood and/or frame construction, you may need to reinforce it. Front-loaders use substantially faster spin speeds than top-loaders, causing greater vibration. If the floor is not solid, your washe will vibrate. You will hear and feel the vibration throughout your house.

■ Power outlet

• Must be within 60 in. (1.5 m) of either side of the washer. Do not overload the outlet with more than one appliance.

• Time-delay fuse or circuit breaker is recommended.

NOTE: It is the personal responsibility and

obligation of the customer to have a proper outlet installed by a qualified electrician.

[Side view]

(2.5 cm)

31.8"

(80.9cm)

(2.5 cm)

*Please be sure to read and follow the installation operation manual. (Pedestal Model : P-W151W)

People's safety is the first priority. There are many safety particulars in the guidebook and product. Therefore, please be sure to read and abide by all safety particulars.

1. Please take out the height-high shelf and its installation manual from the wrapped box.

2. Please untie 4 horizontal adjustment legs of the washer and dryer.

3. Please turn and insert 4 horizontal adjustment legs in the lower part of adjustable cases.

4. Please place the washer or dryer on the adjustable cases. N.B : The washer and dryer are heavy so that more than

two persons have to raise them together.

N.B : Please pull out the plugs of the washer and dryer in

use, lock the faucet and divide the supply hose and drainage hose. Then, please pull out water from all hoses.

5. After pulling out and opening the drawers of adjustable cases forwards, pull out the accessory bags for bolts from the drawer sand insert the spring washer (b) and plain washer (c) into the joint BOLT (a) in order.

6. In order for the washer or dryer to operate properly the combination of adjustable cases on the bottom must be balanced. If the adjustable legs are not balanced due to a unstable platform, it is needed to balance them by adjusting the horizontal adjustment legs. And, to fix the position of these legs, tighten the bolts by using wrench provided as much as possible. This would result in a balanced operation.

7. Take out the back cover and screw from the left part of the height-high shelf drawer. Assemble 10 svrews at the holes back of the shelf.

8. After transferring it into the desired installation spot, try to operate the washer or dryer and check whether there are any mechanial noises and vibration. N.B : In order for the washer or dryer to be operate the

combination of adjustable cases on the plain bottom. When they are not at a level with each adjustment legs of adjustable cases, leave the horizontal adjustment legs as it is, and fasten the lock nut towards the cases solidly.

9. After transferring them in the desired installation location, get the washer or dryer operated and check whether there are any mechanical noises and vibration.

INSTALLATION OF A CCESSORIES

CAUTION : When installing the said product, please be sure to let the expert with electrictiy & machine related

training and sufficient experiences install it.

Excessive load is dangerous.

In case of installing and carrying the adjustable cases of the washer and dryer, more than two persons should do it together. Please let children not play on the cases.

Installation methods

* Please be sure to read and follow the installation operation manual(Stacking Kit Model : K-ST1*)

People's safety is the first priority. There are many safety particulars in the guidebook and product. Therefore, please be sure to read and abide by all safety particulars.

Stacking kit(K-ST1*) allows the dryer to be fitted to the top of washing machine. Model DWD-WD31WW

DWD-WD33WS DWD-WD33SS DWD-WD33RS

The kit contains, all the nessary brackets and screws. Tools needed - Screwdriver, drill tip(ø3.5mm, Length < 80mm), power or hand drill.

1. Place washer firmly on a stable, even and solid floor as product installation instructions decribes in owner's manual.

2. Lift and place the dryer on top of the washer

3. Peel protectie paper off the double sided tape from the rear bracket of the stacking kit.

4. Push and fix the front and rear bracket of the stacking kit as shown in the picture.

5. Drill a hole in the both sides of stacking kit and the both sides of top plate. (hole Dia. 3.5mm)

6. Screw both sides of the rear bracket.

CAUTION : When installing the said product, please be sure to let the expert with electrictiy & machine related

training and sufficient experiences install it.

Excessive load is dangerous.

In case of installing and carrying the adjustable cases of the washer and dryer, more than two persons should do it together. Please let children not play on the cases.

Installation methods

• Close zippers, snaps, and hooks to avoid snagging other items. Remove pin, buckles, and other hard objects to avoid scratching the washer interior.

• Empty pockets and pull them inside out.

• Turn down cuffs and turn synthetic knits inside out to avoid pilling.

• Tie strings and sashes to avoid tangling.

• Treat spots and stains. (See “Removing stains”)

To obtain the best washing results, you must operate your washer properly. This section gives you this important information.

OPERATING Y OUR WASHER

Preparing clothes for washing

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.

• Separate dark colors from light colors, colorfast items from non-colorfast item.

Sorting

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil. Color (White, Lights, Darks) Separate white clothes from colored clothes. Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

① Detergent case

② Adding fabric softner or bleach or liquid detergent

• If desired, add measured liquid softner or bleach or liquid detergent to the softner or bleach or liquid detergent inlet.

• Pour liquid softner or bleach or liquid detergent into the dispenser using the amount recommended on the package.

• Do not exceed the maximum fill line. Overfilling can cause early dispensing of the softner or bleach or liquid detergent which could stain clothes.

• Do not open the detergent case when water is supplied.

• Avoid pouring softner or bleach or liquid detergent directly on the clothes.

• Check to see if the liquid case are even.

Adding detergent

• Drop items into washer loosely. Items should move easily through wash water for best cleaning and wrinkle-free results.

• Load washer properly and select correct load size setting. Overloading and selecting a setting too small for the wash load can :

- Cause poor cleaning

- Increase wrinkling

- Create excessive lint

- Wear out items faster (because of pilling)

• Mix large and small items in each load. Load evenly to maintain washer balance. An unbalanced load can make the washer vibrate during spin.

• Reduce wash time when using a small load size setting. Load with only a few small items needs less wash time.

• Use a large load size setting to reduce wrinkling with permanent press clothes and some synthetic knits. These items should have more room to move in the water than heavy items. (towels, jeans)

Main-wash

Bleach

softener

Pre-wash

USING THE DISPENSER

The automatic dispenser consists of four compartments which hold 1) liquid chlorine bleach, 2) liquid fabric softener, 3) liquid or powdered detergent for prewash and 4) liquid or powdered detergent and color safe bleach for main wash. All laundry products can be added at once in their respective dispenser compartments. They will be dispensed at the appropriate time for most effective cleaning. After loading the laundry additives into the dispenser, close the dispenser drawer.

Add detergent, bleach and fabric softener to the automatic dispenser following these steps:

1. Open the dispenser drawer.

2. Load the laundry products into the appropriate compartments.

3. Close the dispenser drawer.

■About detergent

Your washer is designed to use only High Efficiency (HE) detergents. HE detergents are formulated specifically for front load washers and contain suds reducing components. HE detergents make less suds, improve washing and rinsing performance, and help to keep the interior of your washer clean. Use the manufacture’s recommend amount. If a regular detergent is used, it may cause oversudsing and unsatisfactory performance. For the best washing and rinsing performance, low-sudsing HE detergents are strongly recommended.

1. Prewash Detergent Compartment

• Add detergent to this compartment when using the Prewash option. Liquid or powdered detergent may be used in this compartment. The detergent will automatically be dispensed during Prewash if the Prewash option in selected.

• Add 1/2 the recommended amount of detergent to the Prewash compartment and the recommended amount of detergent to the main wash compartment.

NOTE: Liquid detergent will drain into the washer

drum as it is added.

Designed specially to use only HE(High Efficiency) detergent

Main-wash

Bleach

softener

Pre-wash

+ 26 hidden pages