FEATURE CHART
1 |
|
|
2 |
13 |
|
3 |
||
|
||
4 |
14 |
|
5 |
||
|
||
6 |
|
|
7 |
15 |
|
8 |
16 |
|
|
||
9 |
17 |
|
10 |
18 |
|
|
||
11 |
|
|
|
19 |
|
12 |
|
|
!FREEZER TEMPERATURE |
)CRISPER COVER |
|
CONTROL KNOB |
1CRISPER |
|
@F SHELF |
2ADJUSTABLE POOT |
|
#ICE HOLDER ASSEMBY |
3F POCKET (SM) |
|
$ICE CASE FRAME |
4F POCKET (SM) |
|
ASSEMBY |
5EGG CASE |
|
%ICE BOX |
6EGG POCKET |
|
^CHILLED CORNER |
7R POCKET (SM) |
|
&LAMP COVER |
8R POCKET (MEDIUM) |
|
*REFRIGERATOR |
9R POCKET (BG) |
|
TEMPERATURE CONTROL |
|
|
(R SHELF |
|
HERE ARE THE FEATURES OF YOUR NEW REFRIGERATOR
Take a moment to know all the features and convenience. Numbers match those in the illustration on page 1.
■Ice Tray: Fill tray 3/4 full to allow expansion of water during freezing. Place tray in freezer chest. To release cubes, twist lid slightly.
■Removable Shelf: Both shelves can be removed by pulling forward.
■Crisper: Use for fruit and vegetable storage. Both the crisper and its cover shelf are removable for easy cleaning. Simply slide forward to remove.
■Egg Pocket: Egg supporter in this pocket can be turned upside down. Use for small size goods.
■No Frost: No frost in freezing-room.
CAUTION
1.Be sure to check with your voltage, before inserting the power supply cord into the socket.
2.Contact the earthing conductor to this unit with an attachment earthing screws.
3.Don’t spill to this unit.
4.Don’t work with flammable spray, such as painting, near this unit.
5.Don’t put ignitable materials, such as benzine, L .P . Gas, alcohol, etc., into this unit.
6.Be careful of the leakage of any gas equipment near this unit.
7.Be sure not to hold to the door of this unit by children.
8.Be sure not to reinsert the power supply, cord with 5 minutes after
releasing it from socket. If not, a trouble may be occurred to compressor.
■Ice Case Frame Assembly
1)Fill the ice case with water upto the water level line and insert it into the designated space in the ice holder.
2)After the water is completely frozen, twist the ice case handle clockwise and let the ice fall into the ice box below. When all ice has been cleared from the ice case, let go of the handle which will return to its original position by a return spring installed.
STARTING POINT OF TWISTING
RETURN-SPRING |
¡ |
|
120 |
||
ICE CASE |
||
|
ICE CASE FRAME
1 |
2 |
HOW TO OPERATE
Temperature is controlled by thermostat automatically.
The Temperature Control inside the refrigerator controls the degree of cooling for each compartment.
Freezer Temperature Control |
Refrigerator Temperature Control |
|
TEMP. CONTROL |
|
|
MIN |
WINTER |
|
MED |
||
MAX |
||
|
||
MAX |
|
|
WINTER |
|
|
|
MED |
|
|
MIN |
|
|
TEMP. CONTROL |
|
The control has four settings form |
The control has the four settings from |
|
MIN to WINTER. The WINTER |
MIN to WINTER. The WINTER mode |
|
mode is available only if atmosphere |
is available only if atmosphere |
|
temperature is below 10°C. |
temperature is below 10°C. |
Starting your new refrigerator
1.Clean the refrigerator thoroughly. Wipe the outside with a dry cloth, and the inside with a damp cloth.
2.Set the temperature control knob at normal position.
3.Connect the power supply cord.
To control temperature
Many factors may influence the internal temperature of the refrigerator and freezer compartments.
■The temperature and humidity of the surrounding environment.
■The opening frequency of the doors and the amount of warm food placed in the refrigerator.
■The combination of food and containers stored in the refrigerator.
For these reasons, you may want to adjust the control to suit the season and your needs.
METHODS OF SAFE INSTALLATION
1. SAFE INSTALLATION PLACE FOR YOUR REFRIGERATOR
•Place the refrigerator on hard and level floor.
•Place your refrigerator where there is no heat source nearby.
High surrounding temperature will lower cooling efficiency and increases your electricity
.
•Place the refrigerator in an area with low moisture.
Splashing water or a high moisture area may cause a short circuit and make rusting easier.
NO
NO
•Avoid places that are exposed to smoke. The discoloring can
•For good ventilation place refrigerator with the spaced specified on the figure.
This helps cooling efficiency and lowers the electricity bill.
•Placing the refrigerator on the carpet may cause heat to develop and discolor the appliance. In such a case put a hard wooden board or a rubber mat between the refrigerator and the carpet.
|
|
|
|
30cm |
|
|
|
|
|
least |
|
|
|
|
At |
|
|
|
|
|
|
|
Carpet |
At |
least |
|
|
15cm |
Wooden Board, |
|
15cm |
least |
|
Rubber Mat |
|
|
|
|
|
||
|
|
At |
|
|
|
|
|
|
|
|
3 |
4 |