Daewoo Q250PF User Manual

Instruction manual

Video cassette recorder

Q250PF

English

Precautions

Please keep the video machine's guarantee card and receipt safe for warranty purposes.

◆ Read carefully through this manual to familiarize yourself with this

high-quality video cassette recorder.

◆ Make sure the rating of your household electricity supply matches

that shown on the back of the video cassette recorder.

◆ Refer to this chapter and the "Initial installation" chapter to help

you install and adjust your video cassette recorder.

Do not ... ... expose the video cassette recorder to high levels of humidity and

heat, to avoid the risk of fire and electric shock.

... open the video cassette recorder. Have a qualified technician carry

out repairs.

... connect the video cassette recorder to the power supply if you have

just moved it from a cold to warm environment. This can result in condensation inside the recorder and cause serious damage to the machine and cassettes. Wait around two hours to allow it to reach room temperature.

Make sure ... ... the recorder is placed on a steady, flat surface. ... you place the recorder where there is good ventilation all around. ... you clean the recorder only with a soft, lint-free cloth; do not use

aggressive or alcohol-based cleaning agents.

... you disconnect the power supply if the recorder appears to be

working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the recorder.

... you disconnect the power supply and aerial if you will not be using

the recorder for a long period or during a thunderstorm.

For your own safety!

◆ There are no components in this video cassette recorder

you can service or repair yourself.

◆ Do not open the case of the video cassette recorder.

Only allow qualified personnel to repair or service your set.

◆ This video cassette recorder is designed for continuous

operation. Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it.

◆ Recording any copyright protected material may infringe

a copyright.

WORTH

knowing

AUTO SET

OP EJECT

CH.

WORTH

Contents

Before doing anything with the machine, please read the chapter "Initial installation".

◆ On the following pages, the pictures show the buttons you press on the remote control to

perform the function, and what you should see in the On Screen Display or machine display (if present).

Controls

The remote control unit .................................................................................... 2

The machine, On screen display ...................................................................... 3

Initial installation

Connecting up the video cassette recorder, Fitting the remote control’s

batteries ........................................................................................................... 4

Setting up the video cassette recorder ........................................................... 5

Playing cassettes

Playing back .......................................................................................................6

Still, Variable picture search, Variable slow motion,

Accessing new recordings (index scan), CM Skip ........................................... 7

Recording cassettes

Simple recording, One touch recording (OTR).................................................. 8

Setting time and date....................................................................................... 9

More functions

Normal timer recording .................................................................................. 10

Timer Review – changing and erasing .......................................................... 11

Clock/Counter display, Remaining time and Cassette length,

Accessing counter zero position, Resetting the counter to zero ................. 12

Child lock, Cassettes, and ... .......................................................................... 13

Tuning new stations

Tuning ............................................................................................................. 14

Station names ................................................................................................ 15

Sorting programme locations, Clearing programme locations ...................... 16

Connections and copying

To the TV via antenna cable (if you are not using a RCA cable) ................... 17

Copying, Assembling ...................................................................................... 18

Appendix

Brief instruction for experienced users .................................................... 19/20

Before you ask a specialist ............................................................................ 21

Index, Technical data ..................................................................................... 22

knowing

The remote control unit

◆

The remote control is the principle means of control, but the main playback and record functions are also available on the front of the machine.

◆

Press any button to turn on the power.

power on/off

this button is not available for this set a button for selecting input sources for recording:

TV stations – input sockets clock/counter on-screen display

this button is not available for this set this button is not available for this set

CM skip button to cue the tape for 30 seconds

to eject the cassette

the variable slow motion button

this button is not available for this set

to search the beginnings of records (index)

a button that doubles the maximum recording time for very long recordings

the record or OTR button (One Touch Recording means: each time you press the

button recording is extended by 30 minutes)

pause (record), still (playback) playback start playback stop

rewinding/fast forwarding a cassette from stop, or picture search backwards/forwards from playback mode

number buttons to select programmes (stations) or to type in numbers

the menu controls, programme (station) selection (PR +/–)

Q.S

A.D

INDEX

–

The buttons to use are marked on the following pages.

this button is not available for this set

30°

max. 7 m.

30°

PAL/SEC

Q. S

CONTROLS

TV/VCR

SP/LP

TV/VCR

A.D

EJECT

SP/LP

–

INDEX

EJECT

–

A.SEL

–

PAL/SEC

A.SEL

CONTROLS

The machine

On screen display

◆

Press any button to turn on the power.

power on/off

playback stop and ejecting the cassette

MAIN MENU

Timer Program PR Preset VCR Setup Tape Control

PR+/-:select OK:confirm MENU:end

VCR SETUP

Clock Set Language Set RF Output Set 16:9 Set

PR+/-:select OK:confirm MENU:end

example

–

“Tape Control” Menu appears only when a tape is in the VCR.

The menus show you which button to press for the next step.

In addition, some other functions appear on screen temporarily.

REW SP PR04 EURO

programme (station) selection

recording or OTR

(One Touch Recording means: each time you press the button recording is extended by 30 minutes)

rewinding / fast forwarding a cassette from Stop, or picture search backwards / forwards from playback mode.

playback start

The video’s menu system gives you easy-tounderstand access to the less used functions such as tuning to stations, clock setting and more.

* Though the ”16:9 Set” is displayed on the screen, this function is not available for this set.

Connecting up the video cassette recorder

Fitting the remote control's batteries

Place your video

◆

horizontally on a flat, steady base so that air can circulate around it for ventilation.

◆

away from humidity and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top.

Switch off all components when connecting or disconnecting cables.

◆ Unplug the aerial cable from your TV and plug it into the

"ANT. IN" socket of the video. Plug the short coaxial cable provided into the "ANT.OUT"

socket of the video and the aerial socket of the TV.

◆ Plug a RCA cable into the "RCA” socket of the video and

the AV socket on the TV if available.

This connection will provide best picture and sound quality. Ask your dealer for an appropriate cable if you do not have one. Without a RCA cable, you need to follow the steps described under

"If you are not using a RCA cable" (right page and page 17).

◆ Make sure the rating of the household mains supply matches the

rating shown on the back of the video.

Now plug in the mains lead. The display of the video should now light.

Fit the batteries as shown by the pictures in the bay.

1.5 V (AAA)

AC 230V~ 50Hz

◆ Protect your environment by returning used batteries to your dealer. Since

batteries contain toxic substances they require special disposal methods.

◆ Make sure the batteries are always of the same type and age, and remove them

from the remote control if you are not using it for a long period.

The buttons to use are marked on the following pages.

PAL/SEC

Q. S

Initial

INSTALLATION

TV/VCR

SP/LP

–

INDEX

A.D

EJECT

–

A.SEL

INSTALLATION

Initial

Setting up the video cassette recorder

◆

Switch the TV on.

◆

You can also start "Auto Search" in the menu "PR Preset” "Auto Search".

◆

To tune in new stations (manual tuning) and to enter station names see page 14-16.

You should see this picture the first time you switch on the TV and video.

OK for "Auto Search!".

"AUTO SEARCH" tunes in all the stations you can receive in your country and ...

... sorts them in an order common for your country.

Should you wish the stations to have the same numbers as those used on the TV, follow the instructions in "Sorting programme locations" on page 16. Else ...

exit the basic installation function and enjoy your video cassette recorder.

◆ If you don´t see this picture, because you don´t use a RCA cable, search this picture

now (CH 52) with the station tuning functions of your TV set (see its user manual).

◆ In case of interference problems on CH 52, type in an other

transmission channel between 21 and 69 using the number buttons.

Auto Search!

OK:confirm MENU:end

AUTO SEARCH

MENU:end

PR03

V-L - - - - - - - - - - - - - - -

76%

Please wait...

MANUAL SET

PR01 P-01 PR08 P-08 PR02 P-02 PR09 P-09 PR03 P-03 PR10 P-10 PR04 P-04 PR11 P-11 PR05 P-05 PR12 ---PR06 P-06 PR13 ---PR07 P-07 PR14 ----

PR+/-:select OK:confirm MENU:end

AUTO SEARCH

Then type in the current time and date.

CLOCK SET

0-9:setup(hour)

/ :correct MENU:end

Time - - : - Date - - / - - / - - - -

Playing back

◆

Your TV and your video cassette recorder are switched on.

◆

To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button.

Load the cassette by pushing it smoothly and squarely into the cassette bay, with its windows pointing up.

Start playback.

Stop playback.

Eject the cassette.

Fast forward or rewind the cassette from stop.

◆ When you load a protected cassette (e.g. pre-recorded film,

see page 13) playback starts automatically.

◆ PLAY switches back to normal playback.

◆ During still, slow or search, you don’t hear the sound.

◆ If the still picture is jittering, you can steady it by using the PR +/–

buttons.

◆ You can reduce horizontal interference stripesresulting from

inaccurate tracking (when playing tapes of poor quality or recorded on other machines) by using the PR +/– buttons during playback.

◆ After approx. 5 minutes in still, the cassette plays back

automatically.

◆ NTSC PLAYBACK on PAL TV ; If you playback the tapes, which have

been recorded on NTSC color system, on this VCR, you can watch the pictures on a PAL TV.

◆ Clock / Counter / Remaining time – page 12.

PAL/SEC

Q. S

AUTO SET

20 : 10

VHS

VCR

PLAYING

cassettes

SP/LP

TV/VCR

A.D

EJECT

–

INDEX

EJECT

–

A.SEL

+ 17 hidden pages

Daewoo Q250PF User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual