Daewoo PXT-42BSTD, DTS-42 Instruction Manual

PLASMA TELEVISION

USER MANUAL

DTS-42

Proper use guarantees

product life.

Before using the product, be advised
that you read this user manual well and
try to operate it.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol is lntended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.

The symbol is intended to alert the user to the presence of important operating and
maintenance(servicing) instructions in the lierature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

CAUTION:

- TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

- THE STAND INTENDED FOR USE ONLY WITH THIS PDP TV. USE WITH OTHER APPARATUS IS
CAPABLE OF RESULTING IN INSTABILITY CAUSING POSSIBLE INJURY.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a damp cloth.

7. Do not block any of the ventilation openings. Install in accordance with the
manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. When the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet.

10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.

11. Only use the attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long
periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

4

This User Manual presents safety precautions and how to use the product.
After reading it thoroughly, use the product safely.
Keep this manual where the user can see it easily.

Failure to comply with warnings and cautions for the safe use of electric
appliances may cause fire or human injury.

• 42” VGA wide Plasma Panel

•

Built in Analog Tuner

PDP has the analog tuner inside for watching terrestrial broadcasting without the need to purchase a
separate broadcasting receiver.

• DVD Direct Connection / Outstanding Picture Quality via a Digital
Broadcast Receiver

A DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even
higher quality images by connecting a digital broadcasting receiver with which digital broadcasts can be
viewed.

•A

PC Direct Connection

PC can be connected to the PDP without a separate device and can be used as a TV making it ideal for
presentation, various events and exhibitions.

•

160oWide-Angle Viewing Area

•

Flat Panel with No Distortion and Color Blurring

Since Plasma TV has no problems such as distortion, blurring, flickering unlike existing CRT type displays
you can enjoy Home Cinema picture quality and sound.

•

Various Control Functions

- 4 Languages OSD, 20 Step screen zoom function, Full-screen still function, Various aspect ratio,
Keypad lock fuction, Sleep timer, and so forth.

•

Free Volt (100-240V~, 50/60Hz)

•

DVI (Digital Visual Interface) Connection

When connected to a PC, you can receive DVI digital signals as well as the former analog signals by
using DVI input and D-Sub input. Furthermore, using the DVI Input, you can receive directly a digital
signal from the computer. Consequently, pictures on the screen are much more clear and fresh.

•

CCF(Capsulated Color Filter) Technology for natural color

CCF Technology makes the picture clearer by controlling of the brightness among three different color
filters.

•

MGDI (Meta Genuine Digital Image) Engine

MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid,
and delicated images.

Features

Features

FCC RF INTERFERENCE ST

FCC RF INTERFERENCE STAA

TEMENT

TEMENT

NOTE :

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.

If this equipment does cause interference to radio or television reception
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

- Consult authorized service centers for help.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the users
authority to operate such equipment,

Always obey all

safety messages.

•All the safety and
operating
instructions should
be read before the
product is operated.
If anything strange
happens, unplug
this product from
the wall outlet.

•Do not disassemble
or replace any parts
of the TV.
Refer to a qualified
service personnel
for repair.

Safety Precautions

6

W ARNING

You can be dead
or seriously
injured if you do
not follow
instructions.

During a lightning storm, or when it is left
unattended and unused for a long period
of time, unplug it from the wall outlet.

It can result in fire.

When unplugging your TV, always grip
plug firmly and pull straight out from the
receptacle.

It can result in fire or electric shock due to
damaged power cord.

This product must be properly grounded.

• Improper grounding may cause malfunction or
electric shock.

• When proper grounding is not possible, install
circuit breaker.

• Do not ground to gas pipe, water pipe, lightning
rod, or telephone line.

During a lightning storm, unplug the TV
from the wall outlet, and do not touch the
antenna.

It can cause fire or electric shock.

Power

Installation

Do not use this product in the
neighborhood of a bath or shower.

It can result in electric shock or fire.

Do not place this TV on an unstable cart,
stand, or table

It may cause the product and cart to overturn,
damaging equipment or causing possible injury.

7

Do not open the cover (or back)
because high voltage is present
within the TV enclosure.

It may cause electric shock.

Never push any kind of objects into
this product through openings at the
back of TV.

It may cause fire or electric shock.

The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.

Spilled liquids may cause electric shock or
fire.

Do not allow children to play or hang
on the TV.

These actions may tip it over, causing
personal injury.

Do not place a candle or lighted
cigarette on the TV.

If these fall into the inside of the TV, it may
cause a fire or explosion.

Do not disassemble batteries, and
do not leave around in case children
swallow them.

Heavy metal may contaminate environment,
and can be harmful or detrimental to human
health. (If children swallow the batteries, go to
hospital and consult with a doctor.)
Batteries could explode if Fitted incorrectly.
Align the batteries according to the (+) and (-)
indication inside the case.

Do not spray water Onto the TV or
wipe with damp cloth.

It may cause an electric shock or fire.

Unplug the TV from the wall outlet
when smoke or a strange smell
occurs, then refer to a service
personnel.

Leaving the TV on in this condition, may
cause fire or electric shock.

During Use

8

Always obey all

safety messages.

• All the safety and
operating instructions
should be read before
the product is
operated.

Safety Precautions

Power

Installation

CAUTION

You can be injured,
or this product or
any other of your
property can be
damaged if you
don’t follow
instructions.

When moving your TV, remove the power
plug, antenna, and cables, and be sure to
move it by using two people..

Failure to follow this instruction can result in
electric shock or personal injury.

Do not touch the power plug with wet
hands when plugging or unplugging it
into the wall socket.

It can result in a risk of electric shock.

Do not install the product where it will be exposed to
the direct sunlight, and the product should not be
near heat sources such as radiators, stoves, etc.

It may cause malfunction.

Do not install the product where there is
oil, smog, moist, or dust

It may cause malfunction.

For proper ventilation, separate the product
from the wall, and keep a distance of more
than 10cm (4”).

Due to the increase of temperature inside the TV,
it may cause fire.

Minimum distances around the apparatus
for sufficient ventilation.

Due to the increase of temperature inside the TV,
it may cause fire.

If you wish to install this product on the
wall or ceiling, refer to a professional.

Failure to do so may cause damage to product
and injury to human.

When using an outside antenna system, do not
install it in the vicinity of overhead power lines.

If the antenna touches such power lines, it may
cause electric shock.

99

During Use

Do not wipe the TV using a cloth
damped with chemicals (benzene,
thinner, etc.).

TV appearance may be marred.
(Unplug the power plug and wipe with soft
cloth.)

Do not place any object or cover on
the TV.

In an event of improper ventilation, the TV
will be overheated causing fire.

Do not place heavy objects or heat
sources on the power cord.

It may damage the power cord, causing fire
or electric shock.

When watching the TV, the distance
between the TV screen and your eye
should be as 5~7 times as the
diagonal distance of the TV.

Watching the TV for a long time may hurt
your eye sight.

When cleaning of the inside of the
TV is required, consult to the
qualified service personnel.

When the TV is not cleaned for a long
period of time, dust in it may cause fire or
malfunction.

When the TV is placed on a cart or
table, the front side of the TV should
not project outward.

Unbalance may cause the TV to drop,
resulting in personal injury or equipment
malfunction and damage.

Do not grip speakers when moving
the TV attached with speakers.

When moving the TV while gripping
speakers, speakers may be fallen away
from the TV due to its weight, causing
personal injury.

Do not allow a still picture to be
displayed for an extended period, as
this can cause a permanent ghost
image to remain on the Wide Plasma
Television.

Examples of still pictures include logos,
video games, computer images, teletext
and images displayed in 4:3 mode.

Warranty does not cover any damage
caused by image retention.

The plasma television panel consists
of fine cells. Although the panels are
produced with more than 99.9
percent active cells, there may be
some cells that do not produce light
or remain lit.

10

VIDE

O/

DVD S

ATTV CATV

DISP

LAY

MU

LTIM

ED

IA

T

V/VIDEO

CH

CH

V
O

L

V
O

L

Z

O

O

M

+

Z

O

O

M

-

M

ENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

M

U

TE

C

APTIO

N

F.F/SLO

W

PLAYF.R

/SLOW

R

EC

S

TOP

PAU

SE

PR

EV

O

P

EN

/C

LO

SE

NEXT

PIC

TU

RE

MO

D

E

SO

UN

D

M

OD

E

STILL

P

O

W

E

R

M

T

S

A

D

D

/

E

R

A

S

E

S

L

E

E

P

Remote Control

1 UNIT

Component Cable

1UNIT

Coaxial Cable

1 UNIT

A/V Cable

2 UNITS

Note

Check to be sure that the following items are
packed with your Plasma panel.

Checking Accessories

Supplied Accessories

AC Cable 1 UNIT

Ferrite Core

2UNITS

Speaker(2 units)

Place the small ferrite
cores in the speaker
cables close to the
speaker terminals of
the PDP unit.

11

Note

The following items are optional accessories.
Refer purchasing optional accessories from

Daewoo Electronics Local retailer or the retailer
from where you purchased the unit.

Optional Accessories

Table Top Stand

Speakers

DTS-42SP

- Speaker Main Unit Dimension :
100(W) x 628(H) x 83(D) mm

39.37(W) x 24.72(H) x 3.27(D) inch

- Dimension Including Speaker Stand :
170(W) x 729(H) x 194(D) mm

6.69(W) x 28.7(H) x 7.64(D) inch

- Audio Amplifier : 10W + 10W

- Impedance : 8Ω

- Weight : 6.4kg(14.11 Lbs)

DTS-42ST

-

Dimension

: 667(W) x 212(H) x

320(D) mm

26.26(W) x 8.35(H) x

12.6(D) inch

- Weight : 7kg(15.43 Lbs)

Wall Mounting Unit

DSP/DP-HG10, DSP/DP-HG20,
DSP/DP-HG22

-

Variable Angles : 0o, 10o, 15o, 20

o

-

Dimension: 601(W) x 592(H) x 35(D) mm

23.66(W) x 23.31(H) x 1.9(D) inch

-

Weight

: 4.5kg(10 Lbs)

13

6 • Safety Precautions
10 • Checking Accessories
14 • Panel Controls
15 • Remote control
16 • Remote Control Setup

PREPARATION

CONNECTION

17 • Antenna Connection
20 • To Watch TV
22 • Channel Setup
28 • Watching Digital Broadcasts
30 • Watching Cable Broadcasts
32 • Watching Satellite Broadcasts
34 • Watching a DVD Image
36 • Watching a VCR Image
38 • Watching a Camcorder/Game Console Image
40 • Connecting PC(15Pin D-Sub)
42 • Connecting PC(DVI)

APPLICATION

MISC.

78 • Before Requesting Service
79 • SPECIFICATIONS

CONTENTS

45 • Selecting Picture Mode 61 •

MENU Background, Languages

46 • Customizing Picture

and Keypad Lock Settings

48 •

Adjusting Screen Size

63 •

MGDI (Meta Genuine

50 •

Adjusting Screen Size(PC, DVI)

Digital Image)
52 • Enlarging Screen Size 65 • Closed Caption Setting
54 • Watching a Still Image 67 • Time Setting
55 • Adjusting Auto Sound Mode 69 • Image Sticking
56 • Customizing Sound Mode Minimization(ISM)
58 • Selecting INPUT SIGNAL 71 • Parental Lock Setting
60 •

Checking the Current Input Signal

75 • Initialize Setting
77 • Setting Sleep Timer

Panel Controls

14

Front Panel, Back Panel, Remote Control

*

Items having same names on Plasma television and the remote control would function in exactly
the same way.

Front

Rear

ON/OFF

•

Power control sensor

•

Power Standby: Red - Standby

Green - ON

•

Power button

Select when adjusting volume or
select/adjust “MENU.”

Press when moving “MENU” or “Channel”

STAND BY/OPERATE

DVI-D INPUT ANT

Used when
manufacturing(For
manufacturer use
only)

PC INPUT(15 pin
D-sub)

DVI-D
INPUT

COMPONENT A/V jacks
(DTV/DVD INPUT jacks)

S-VIDEO,
A/V INPUT,
Cable
Receiver
INPUT
jacks

External
Speaker

Power

ANT

TV out

Right Speaker

Left Speaker

Position of

Ferrite Core

15

Remote Control

When Using Remote Control:

•

Be sure not to allow the Remote Control to drop or to become wet.

•

Keep it away from hot or moist locations.

Installing the Batteries in your Remote Control:

•

Push to open the cover of the remote controller

•

Set the batteries in the battery cell after checking the
electrode, and then shut the cover.

TV/VIDEO(DVD)/SAT/CATV

Use to select channel directly 0~9

Indicates the current state and resolution.

Use this function to make video input selection.

It changes in the following sequence

TV -> Video1 -> Video2 -> TV

Used to zoom the screen. To enlarge, press the(+)

button, and to return to the previous condition, press

the(-) button.(Zoom Mode : Zoom 0~20)

Used to display a desired menu.

Pressing the Power button of the TV allows
the Display to be standby. (Red light is
shown in the Remote Control Sensor.) At
this time, if you press the Power button of
the Remote Control, the Display is turned
ON (Green light in the Sensor).

Use it when selecting a channel number of
over 100

Use this function to make video input selection.
It changes in the following sequence PC -> DVI

-> Component 1-> Component 2 -> PC

Adjusts the size of the screen
(Normal, 16:9, etc.)

This feature allows you to choose the caption.

Display button

TV/VIDEO

ZOOM button

Menu button

Volume button / Adjusts the volume.

Screen Size button

Caption button

Power button

100

Channel number (0~9)

Multimedia

CH button

/ Adjusts the channel.

Note

• Use two “AAA” batteries.

• Be sure to use replacement batteries of the

same type as the original ones.

• The life of a battery depends on how much
it has been used.

*

The number in

()

indicates the page in which

the function of each button is explained in detail.

VIDEO/

DVD SATTV CATV

DISPLAY

MULTIMEDIATV/VIDEO

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

MUTE

CAPTION

F.F/SLOW

PLAYF.R/SLOW

REC

STOP

PAUSE

PREV

OPEN/CLOSE

NEXT

PICTURE

MODE

SOUND

MODE

STILL

POWER

MTS

ADD/

ERASE

SLEEP

It returns to previous channel.

Previous Channel button

Mute sound.

Mute button

Every press of the button cycles through the

four different.

Normal -> Dynamic -> Cinema -> User.

Picture Mode button

This feature allows you to select the language and

stereo sound while broadcasting

MTS button

The feature either memorizes the current channel

or erases a channel that has previously

memorized.

CHANNEL ADD/ERASE

VIDEO/DVD Function

Used to view a still picture during watching
moving images.(Sound can be heard.)

Still button

Every press of the button cycles through the five different
modes: Normal -> Movie -> Music -> News -> User.

Sound Mode button

Each time you press this button, a different input mode
appears. The sequence is as follows: 15Min. -> 30Min. ->
60Min. -> 90Min. -> 120Min. -> OFF
After the time is selected, it automatically becomes stand­by state.

Sleep Timer button

20

58

65

48

54

55

77

21

60

58

52

22

20

57

24

45

16

Remote Control Setup

- The remote control provided is designed to operate the Daewoo PDP set.

- However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting
Receiver of other brands after setting up the remote control.

HOW TO SET UP THE REMOTE CONTROL FOR US ING OTHER DEVICES .

• Turn on the Device. (Cable Converter, VCR , DVD or Satellite Broadcasting Receiver)

• P ress the device selection button of remote control until it is flickering. It takes about 3 seconds.

• P ress the assigned three digits code of the device using number key button of the remote Control toward the

IR receiver of the device. The code number is provided below. Whenever pressing the number, the device
selection button will be flicked once.

• If the code is set properly, the device will turn off automatically. If not, repeat the process 3.

• As the device is turned off, press the flickering device selection button of the remote control once.

Then the lamp of the button will be turned off.

• Now, the setting-up of the device can be controlled by Daewoo PDP remote control.

Remote Control Setup Code

DAEWOO 002 008 060 062 063 067

068

JVC 003 006 009 043 044 046

084 089

111 114 124
MITSUBISHI 046 052 075 122
PANASONIC 016 070 087 088 106
PHILIPS 005 040 042 045 048 049

053 064

078 081 090 108
SAMSUNG 041 055 056 059 061 065

066 091 095
SHARP 048 049 057 074
SONY 047 050 051 076 080

DVD

DAEWOO 152 160
LG 150 168 169
PANASONIC 157 170
PHILIPS 155
SAMSUNG 151 163 16

DAEWOO 002
PANASONIC 030
PHILIPS 018 031 032
SAMSUNG 079

For more device codes, contact Daewoo
service center.

Remote control supporting the multi brand devices.

Notices:

- All the preset codes are erased when replacing the battery. In this case, you must set the remote control again.

- S ome of the products may not be applied because of different signal system.

- This is only for the basic control of the devices.

VCR (STANDARD : 002) SAT (STANDARD : 002)

Maker (Brand) Name Code Number (3 digit) List Maker (Brand) Name Code Number (3 digit) List

Antenna Connection

17

1. Connect the feeder cable of the antenna to the combining adapter.

2. Connect the combining adapter to the antenna input at the back of the TV set.

WHEN THE IMAGE IS NOT CLEAR

Unclear screen image and bad
reception may be a cause of wrong
antenna connection. Be sure to check
its direction and place when installing.

WHEN USING THE COMBINING ADAPTER

You may obtain the combining adapter
at your closest Service Center.

Antenna Input

Indoor Antenna Connection

CTV Antenna Connection

18

TV Antenna installation may be found in most.

When a coaxial cable is used

Plug the coaxial cable to the antenna socket, and fix it firmly.
It is recommended to use the provided coaxial cable.

When a feeder cable is used

ANT/CABLE 1

ANT/CABLE 1

Provided coaxial cable

19

Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private

houses

Single Antenna Connection.

Separate Antenna Connection.

VHF Antenna

UHF Antenna

ANT/CABLE 1

ANT/CABLE 1

Outdoor Antenna Connection

To Watch TV

20

- The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller,
perform the same function as the remote controller.

VIDEO/

DVD SATTV CATV

DISPLAY

MULTIMEDIATV/VIDEO

CH

CH

V

O

L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

MUTE

CAPTION

F.F/SLOW

PLAYF.R/SLOW

REC

STOP

PAUSE

PREV

OPEN/CLOSE

NEXT

PICTURE

MODE

SOUND

MODE

STILL

POWER

MTS

ADD/

ERASE

SLEEP

To Watch TV

Press the “ON/OFF” button of the
PDP unit.

•Power button of the remote control and the
keypad on the PDP unit would be operated
only when the "AC Power" of the PDP unit is
supplied. Otherwise, neither the remote
controller nor keypad of the PDP unit can
turn on the PDP.

To mute the sound

1. Press the “MUTE” button.

2. No sound is heard if “MUTE” is displayed

on the screen.

3. Sound is heard again if pressing the

“MUTE” button once again.
For example, you can use this button when
telephone rings or when guest comes while
watching TV.

Check of TV operation status

• If pressing the “DISPLAY” button, the status

of the Channel or broadcasting being
currently watched or entry status of video
component is displayed on the screen.

When pressing a Channel button

•Select two digits if using the number button
for Channel selection.
For example, to watch Channel No.9, press
the Nnmber buttons 0 and 9.
If pressing only number 9, it takes more time
than pressing two digits for selecting a
channel.

Auto Power Off

• If TV broadcast for the day is finished, the
TV will automatically turn off after about 30
minutes. However, if the Off-time or Sleep
time is operating, it takes precedence. This
Auto Power Off feature only operates in the
TV mode.

21

Press the “ON/OFF” button.

POWER

• Press the “ON/OFF” button of
the PDP set.

• The main power lamp turns on in
red color.

• Press the "POWER" button of
the remote control or any button
in the keypad of the main body.

• The LED of the PDP set turns on

in “green” color and the set turns
on.

Select Channel.

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

• Select the desired channel by
pressing the “

CH ” button or

the number button.

Ex) Channel 09

Adjust volume.

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

•Sound reduces if pressing the
“

VOL” button.

• Sound increases if pressing the

“VOL

” button.

3

1

2

MONO PM 12 : 00

CH 09

No Ratings

10Volume

Press the “POWER” button to turn off the PDP set.

POWER

• TV turns off and he LED of
the PDP set changes to red
color.

4

ON/OFF

Channel Setup

22

VIDEO

/

DVD SATTV CATV

DISPLAY

MULTIMEDIATV/VIDEO

CH

CH

V

O

L

V

O

L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

M

UTE

CAPTION

F.F/SLOW

PLAYF.R/SLOW

REC

STOP

PAUSE

PREV

OPEN/CLOSE

P

O

W

E

R

- This is the function for the TV to memorize the broadcasting channels. If the Auto Setup is done, you can simply
find out channels with “

CH ” buttons and so need not to select channels by pressing each channel number.

Automatic Channel Memory

Press the “Menu” button.

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

• The menu screen appears as
follows.

• Press the “

CH ” button until

coming on the channel.

• Press the “

VOL ” to enter the

sub menu.

Select the Channel Mode.

• Select the [Ch Mode] by
pressing the “

CH ” button.

• Select “Air” to watch the general
broadcasting, and select “Cable”
to watch the cable TV by using
the “

VOL ” button.

1

Move

Select

MENU

Exit

Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.

Normal

Normal

32
48
32
32
32

Picture

Screen

Sound

Features

Channel

Move

Adjust

MENU

Exit

Picture

Screen

Sound

Features

Channel

Ch Mode
Channel
Memory
Fine Tune
Auto Search

Air
42

Add

0

2

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

23

Select the [Auto Search].

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

• Select the “Auto Search” with
the “

CH ” button.

Press the “VOL ” button.

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

• By pressing the “VOL ” button
automatically searches OnAir
Channel as in the right.

• On Air TV, searches from 2
channels through 69 channels,
and on Cable TV, searches from 1
channels through 125 channels.

• In this case, if pressing the menu
button, the automatic Channel
search is stopped and channels
searched by that time are saved.

Auto Search is completed.

• If auto search is completed, first
momorized channel appears on
the screen.

5

3

4

Move

Adjust

MENU

Exit

Picture

Screen

Sound

Features

Channel

Ch Mode
Channel
Memory
Fine Tune
Auto Search

Air
42

Add

0

Auto Searching Air 42

15%

Please wait ...

MENU

Exit

MONO PM 12 : 00

CH 09

No Ratings

Check by pressing the “ CH ” button.

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

• You can search only the
memorized channels.

6

MONO PM 12 : 00

CH 09

No Ratings

Additional

Channel Memory

•

This is method for
additionally memorizing
channels not
memorized due to weak
broadcasting signal.

•

This function is
available even in the
[Menu] - [Channel] ­[ADD/ERASE].

VIDEO/

DVD SATTV CATV

DISPLAY

MULTIMEDIATV/VIDEO

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

MUTE

CAPTION

F.F/SLOW

PLAYF.R/SLOW

REC

STOP

PAUSE

PREV

OPEN/CLOSE

NEXT

PICTURE

MODE

SOUND

MODE

STILL

POWER

MTS

ADD/

ERASE

SLEEP

Additional Channel Memory

Select the Channel to memorize.

• Select the Channel by pressing the
number button.
Ex) “13” channel

Press the “ADD/ERASE” button.

ADD/

ERASE

• “ADD/ERASE” character alternatively appears
whenever pressing this button.

• Add appears in green color and Erase appears in
red color.

• Add 13 channel by pressing the "ADD/ERASE"
button.

Check the Channel by pressing the “ CH ” button.

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

• “13” is selected by pressing the “ CH ” button.

3

1

2

MONO PM 12 : 00

CH 13

No Ratings

MONO PM 12 : 00

CH 13

No Ratings

24

Add

CH 13