Daewoo FR-370 User Manual
FEATURE CHART
!SHELF F (MOVABLE) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
@ICE HOLDER ASSEMBY |
! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
#ICE CASE FRAME |
@ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
ASSEMBLY |
# |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
$ICE BOX |
$ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
%CHILLED CASE DOOR |
% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
^CHILLED CASE |
^ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
&REFRIGERATOR |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TEMPERATURE |
& |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
CONTROL SWITCH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
*R SHELF (MOVABLE) |
* |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
(LAMP COVER |
( |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
)VEGETABLE CASE COVER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
1VEGETABLE CASE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
2
3
5
4
6
7
8
2FREEZER POCKET(SMALL)
3FREEZER POCKET(MIDDLE)
4EGG CASE
5UTILITY POCKET(SMALL/SMALL)
6UTILITY POCKET(SMALL/MIDDLE)
7BOTTLE POCKET(LARGE/LARGE)
8BOTTLE POCKET(MIDDLE/LARGE)
2
Here are the features of your new refrigerator.
Take a moment to know all the features designed for the convenience of the user.
■Movable refrigerator and freezer shelves
Storage shelves should be adjusted depending on the height of the food stored. To do this, pull the shelves slightly forward.
■Defrost-drain Vessel
Since dust accumulated on the drain case decreases the evaporation efficiency, you should clean the drain case at regular intervals.
■Ice Case Frame Assembly
1)Fill the ice case with water upto the water level line and insert it into the designated space in the ice holder.
2)After the water is completely frozen, twist the ice case handle clockwise and let the ice fall into the ice box below. When all ice has been cleared from the ice case, let go of the handle which will return to its original position by a return spring installed.
ATARTING POINT OF TWISTING
RETURN SPRING
ICE CASE
ICE CASE FRAME
■ Lamp cover
To remove the lamp cover
1. Push up the bottom end of lamp cover gently, then pull out.
2. Reverse procedure to join together.
■ Vegetable case
May be used for fruit and vegetable storage. Both the vegetable case and its cover shelf are removable for easy cleaning. Simply slide forward to remove.
■ Utility Pocket (Top)
The Egg Case in this pocket can be turned upside down for the storage of small size goods.
■ For lock installed refrigerators only.
CAUTION
When you put or take out food from the refrigerator, be careful not to hit your head on the lock as there is a protrusion on the door of your refrigerator.
1.Check your voltage before inserting the power supply cord into the socket.
2.Contact the earthing conductor to this unit with an attachment earthing screw.
3.Do not spill liquid on this unit.
4.Do not use flammable spray, such as painting, near this unit.
5.Do not place ignitable material, such as benzine, L.P. gas, alcohol etc., into this unit.
6.Take precautions against leakage of any gas equipment near this unit.
7.Keep children from hanging on the door of this unit.
8.Do not reinsert the power supply cord within 5 minutes after releasing it from the socket. If not, there may be problems with the compressor.
3 |
4 |
METHODS OF SAFE INSTALLATION
1. SAFE INSTALLATION PLACE FOR YOUR REFRIGERATOR
•Place the refrigerator on a strong and level floor. Unstable installation can produce noise and vibration.
•Place your refrigerator where there is no heat source nearby.
High atmosphere temperature will lower cooling efficiency and increase your electricity bill.
•Place the refrigerator in an area where the humidity level is low. Splashing water on the refrigerator or installing the unit in a humid area may cause short circuit and rust.
2. INSTALLATION STEPS
• Select a safe place to |
• Level the refrigerator by |
• Install the parts in their |
|
using the adjustable feet. |
own place. |
~ |
Componentsoriginal |
to |
|
places |
|
|
|
their |
•Avoid places that are exposed to coal gas or smoke, or discoloring may occur on the
•For good ventilation, keep enough space between the sidewalls and your.
This helps to cool efficiently and lowers the electricity bill.
• Putting the refrigerator |
• Check if the doors are |
• Check the voltage. |
on the carpet may cause |
|
Then wait about an hour |
temperature rise and |
|
before plugging the |
result in the discoloring of |
|
power cord into the |
the carpet due to the |
|
|
|
outlet. |
|
compressor heat. |
|
|
|
|
|
In such a case, place a |
|
|
hard wooden board or a |
|
|
rubber mat between the |
|
|
carpet and the unit. |
|
|
|
|
Plug in after |
|
|
about hour |
Carpet
Check 
Wooden Board,
Rubber Mat
•Put food in the refrigerator after running the refrigerator for 2~3 hours.
|
|
after |
Put |
food |
|
|
hours |
|
2~3 |
|
|
5 |
6 |
Loading...