4
WHAT TO DO...
When you do not use the fridge for a prolonged period:
• Remove the power plug from the power point.
• Remove all contents from the fridge.
• Dry the interior and leave the door open for a few days.
When you wish to move the fridge:
• Secure all movable parts and contents.
(Package them separately if necessary .)
• T ransport the fridge only in an upright position. In any other position you
may damage the compressor.
Before calling service, please follow the checklist below.
This may save you an expensive service call.
If the refrigerator seems too warm inside:
• Check that the door has not been opened too frequently or for too long.
• Check that the interior circulation is not obstructed by having too many
goods stored. (The fridge is overloaded)
• Did you store anything hot, without first cooling it to room temperature?
• Is there sufficient clearance around all sides and above the fridge?
If the fridge starts making any unusual noises:
• Is it wobbling? Re-level it and check if it now operates normally.
• Have any objects fallen behind the fridge? If so, remove them and check if
operation is now normal.
• Are any containers inside the fridge vibrating or resonating? If so, rearrange
them then check to see if operation has returned to normal.
3
HOW TO CLEAN
Cleaners : Never use harsh, abrasive cleaners, heavy-duty cleaners, or
solvents on any surface.
Exterior : Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains
and for periodic waxing, use silicon wax.
Chiller : When refrigerator needs defrosting turn thermostat dial to “OFF”.
Do not use sharp instruments to scrape off ice/frost.
Refrigeration Section: Wash shelves and other removable parts in warm
sudsy water, rinse and dry. Wash interior with baking soda
solution (3 Table spoons to 1 Liter of water) or warm sudsy water,
rinse and dry .
Magnetic Door Seals: Wash with warm sudsy water .
The Finishing Touch: Replace all parts and return thermostat dial to
desired setting.
HOW TO INSTALL
Install refrigerator in a convenient location away from extreme heat and
cold. Allow sufficient clearance between the refrigerator and side wall so
the door may open fully without obstruction.
Refrigerator is not designed for recessed
installation.
Select a space with a strong level floor .
Allow 10cm space between the refrigerator
and all walls.
If installing into a cabinet, ensure you have
good ventilation.
The electrical plug must be accessible without
moving the set.