Daewoo FR-1020ARS, FR-1020ARW Instruction Booklet

FR-1020ARW
FR-1020ARS

2

Dear customer:

Thank you for buying this refrigerator-freezer. To ensure that you get the best
results from your new refrigerator-freezer, please take time to read through the
simple instructions in this booklet.

Please ensure that the packing material is disposed of in accordance with the
current environmental requirements.

When disposing of any refrigerator-freezer equipment please contact your local
waste disposal department for advice on safe disposal.

This appliance must be only used for its intended purpose.

a) DANGER – Risk of fire or explosion. Flammable refrigerant used. Do not use
mechanical devices to defrost refrigerator. Do not puncture refrigerant tubing.
b) DANGER – Risk of fire or explosion. Flammable refrigerant used. To be
repaired only by trained service personnel. Do not puncture refrigerant tubing.
c) CAUTION – Risk of fire or explosion. Flammable refrigerant used. Consult
repair manual/owner’s guide
before attempting to service this product. All safety precautions must be followed.
d) CAUTION – Risk of fire or explosion. Dispose of property in accordance with
federal or local regulations. Flammable refrigerant used.
e) CAUTION – Risk of fire or explosion due to puncture of refrigerant tubing;

3

Follow handling instructions carefully. Flammable refrigerant used.

CAUTION :
General：

This type of refrigerator-freezer is widely used in places such as hotels ,offices,
student dormitories and houses. It is mostly suitable for refrigerating and
preserving foods such as fruits and beverage. It enjoys the advantages of
small size, Lightweight, Low electric consumption and easy use.

4

Main configuration：

The sample cutline is representation of this series of refrigerator, which have similar structure and

different capacity.

1. Freezer control knob

2. Refrigerator temperature control

3. Refrigerator glass shelf

4. Vegetable bin

5. Adjustable feet

6. Freezer shelf

7. Freezer door rail

8. Bottle rack (Small)

9. Gallon rack
10

.

Bottle rack (Large)

1

2

4

5

3

6

7

8

9

10

5

UNPACKING YOUR REFRIGERATOR-FREEZER
WARNING: Use two or more people to move refrigerator-freezer. Failure to

do so can result in back or other injury.

Remove tape and any labels from your refrigerator-freezer before using(except
the rating label).
To remove any remaining tape or glue, rub the area briskly with your thumb.
Tape or glue residue can also be easily removed by rubbing a small amount of
liquid dish soap over the adhesive with your fingers. Wipe with warm water and
dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive
cleaners to remove tape or glue. These products can damage the surface of your
refrigerator-freezer.
When moving the refrigerator-freezer, do not tilt the refrigerator-freezer beyond
45°from upright position.

CLEANING BEFORE USE：

After you remove all of the packaging materials, （especially the foam between
outside condenser and cabinet should be removed）clean the inside of your
refrigerator-freezer before using it.

SPACE REQUIREMENTS
WARNING: Keep flammable materials and vapors, such as gasoline, away form

refrigerator-freezer.
Failure to do so can result in death, explosion, fine or burns.
To ensure proper ventilation for your refrigerator-freezer, allow for 200mm space

6

on each side between walls, 200mm space between back of your
refrigerator-freezer and the wall, and 300mm space between counter top and the
roof or ceiling.
If you are installing your refrigerator-freezer next to a fixed wall, leave sufficient
space on the hinge side to allow for the door to swing open.
Never install your refrigerator-freezer near heat source and direct sun shins.

7

ELECTRICAL REQUIREMENT
WARNING: DO NOT REMOVE GROUND PRONG.

DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.

Failure to follow these instructions can result in death, fire or electrical shock.
Before you move your refrigerator-freezer into its final location, it is important to
make sure you have the proper electrical connection.

Recommended Earthing Method

AC115Volt /60Hz, AC only 10 ampere fused and properly earthed electrical
supply is required. It is recommended that a separate circuit serving only this
appliance be provided. Use a receptacle which cannot be turned off with a switch
or pull chain. Do not use an extension cord.
NOTE: Before performing any type of installation, disconnect the
refrigerator-freezer from the electrical source. When you are finished, connect the
refrigerator-freezer to the electrical source and reset the control to the desired
setting.

LEVELING

If the refrigerator-freezer is not leveled during installation. The doors may not
close or seal properly, causing cooling, frost, or moisture problems. It is very
important of the refrigerator-freezer to be level in order to function properly.
To level your refrigerator-freezer you may either turn the adjustable foot clockwise
to raise that side to the refrigerator-freezer or turn counter – clockwise to lower
that side.

8

NOTE: Having someone push against the top of the refrigerator-freezer, take
some weight off. This makes it easier to adjust the adjustable foot.

USE OF THE APPLIANCE

To obtain the best possible results form your refrigerator-freezer, it is important
that you operate it properly.

OPERATION

HMI and keys operation

The keys in HMI and display layout are referred in the following figure：

1.1 Key

A.SET position set key

1.2 Display screen

① Shift 1
② Shift 2
③ Shift 3
④ Shift 4
⑤ Shift 5

1.3 Display

◆ Once initially powered on，the display screen is on full display for 3s，and then operates as the

displayed middle shift.

◆ Normal operation display

In case of a failure，the appropriate LED light show in combination the failure code (in recycling display)；
In case of no failures，the actual operation position of refrigerator will be on display.

1.4 Shift setting

Each time the shift setting key A is pressed once，the shift position changes one time. After the shift setting has been
completed, the refrigerator will operate according to the set value in 5mins.
The shift regulation is：

Shift 1

Shift 2

Shift 3

Shift 4

Shift 5
A ① ② ③ ④ ⑤

9

1.5 Fault indication

Display

Malfunction

The LED1 and LED2 lit

Refrigerator temperature sensor circuit

The LED1 and LED3 lit

Freezer defrost sensor

The LED1 and LED4 lit

Ambient temperature sensor

Fresh Food Storage

Wrap or store food in the refrigerator in airtight and moisture – proof material.

This prevents food odor and taste transfer throughout refrigerator.

·Fruit – wash, let dry and store in refrigerator in plastic bags or crisper.

·Leafy vegetables- Remove wrapping and trim or tear off bruised and discolored

areas, wash in cold water and drain. Place in plastic bag or plastic container and
store in crisper.

·Fish –Use fresh fish the same day as purchased.

·Meat – Store most meat in original wrapping as long as it is airtight and

moisture – proof.
Re – wrap if necessary.

·Leftovers – Cover leftovers with plastic wrap or aluminum foil. Plastic containers
with tight lied can also be used.

Frozen Food Storage

Temperature Control

When using the refrigerator-freezer for the
first time or after defrosting, turn the
temperature control to set “MAX” for at least

10

two hours before introducing the food to be
stored.
All frozen food products you purchase
should be placed in the freezer compartment as soon as possible to avoid the
frozen food from defrosting.
Storage recommendation printed on the packaging of frozen food by the
manufacturers should be always be followed.
Be careful that the drawer mustn’t mangle the refrigeration pipeline.

Freezing Fresh Food

Ensure that your freezing operations are carried out under the most hygienic
conditions as freezing alone does not sterilize the food. It is advisable to freeze
the food by packing it into separate meal portions and not in bulk form. Never put
hot or even warm foodstuffs into the freezer compartment. Prior to storing the
frozen food, pack it in plastic bags, aluminum sheets or freezing containers and
place into the freezer compartment. See the data plate on the back of the
refrigerator-freezer for the maximum permissible amount in kilograms of fresh
food that can be frozen in any 24 hour period with a room temperature of 25℃.
Never freeze more than the maximum permissible.
Note: Never put bottled food or drinks in the freezer compartment.
For best performance, leave enough space in the Freezer compartment for air to
circulate around the packages.

Cleaning your refrigerator-freezer

Before you start to clean your refrigerator-freezer remove the mains plug from the

11

power supply.
Use a clean sponge or soft and a mild detergent in warm water. Do not use
abrasive or harsh cleaners.
Hand wash, rinse and dry all surfaces thoroughly.
Do not use cleaning waxes, concentrated detergents, bleaches or cleaners
containing petroleum on plastics and rubber parts.
Never use paper towels, window sprays, scouring cleansers or flammable fluids
on plastic parts as these can scratch or damage material.
Clean with a cloth soaked in this solution and then dry with a soft cloth.

PROLONGED OFF PERIODS

If the refrigerator-freezer is not in use for a long period of time, proceed as
follows:
Disconnect the refrigerator-freezer from the main supply by removing the plug
from the wall socket.
Clean and dry the inside as instructed under the heading of cleaning the
refrigerator-freezer.
Leave the door open to prevent any unpleasant smells from building up while the
refrigerator-freezer is not in use.

TROUBLE SHOOTING

In case of malfunction, you can solve many common problems easily.

Your refrigerator-freezer will not operate…Check if

-- The power supply cord is unplugged.

The doors will not close completely…Check if

12

-- The drawers are out of position.

-- The gaskets are dirty.

-- The refrigerator-freezer is not level.

The refrigerator-freezer is noisy when running…Check if

-- Check the refrigerator-freezer is level and it is not in contact with another
appliance or kitchen furniture.

The refrigerator-freezer does not cool sufficiently…Check if

-- If the door has been opened too often, or it has been left open for a while it
will take time for the refrigerator-freezer to reach its set temperature.

-- Check the airflow the rear of the refrigerator-freezer has not been reduced
due to insufficient clearance.
The following characteristics should not be looked upon as a problem.

-- A gentle tricking sound caused by coolant flowing the pipe.
Compressor operating at high temperature.

Repalcing Your Light Bulb
Note：
All parts removed must be saved to do the replacement of the light bulb.

Before removing the light bulb, either turn off the appliance or disconnect the
electricity leading into the appliance at the main power supply. Failure to do
so could result in electrical shock or personal injury.

 Unplug the AC power cord from the wall.
 Pull down to remove the lamp cover.
 Unscrew the bulb.

13

 Repace with a 15-watt bulb that is the same shape and size.

REQUESTING ASSISTANCE OR SERVICE

If the problem is not due to one of the items listed in Troubleshooting, Contact the
dealer or authorized Service Company.

Changing the Reversible Door

Before reversing the door swing, ensure the appliance is unplugged and empty. Provide
additional support for the doors while hinges are being removed. Do not depend on the door
magnets to hold the door in place. It is recommended that two people perform this task. DO
NOT lay the appliance completely flat as this may damage the coolant system.

14

Remove the screws from the
middle hinge. Lift the
refrigerator door up and away
from the appliance.

Remove right bottom hinge and reserve the
screws. Remove screw covers at left corner
and put them into the screw holes at right
corner. Install left hinge by using those
reserved screws.

Remove right pin assemblies from the bottom
of the freezer and refrigerator doors. On the
opposite side, attach the replacement pin
assemblies (located in the plastic bag with the
Use and Care Manual) with a screwdriver.
Note: You must re-use the screws from the pin
assemblies that are removed in this step when
attaching the new assemblies.

Place the refrigerator door on the bottom hinge.
Ensure the door is aligned horizontally and
vertically. Attach middle hinge to refrigerator door
and attach bolt washer to the back of the hinge,
then fix them to middle beam and get them
fastened with a screwdriver.

15

WARNNING
RECOMMENDATIONS：

1) WARNING – Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.

2) WARNING – Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the manufacturer.

3) WARNING – Do not damage the refrigerant circuit.

4) WARNING – Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by the
manufacturer.

Place the freezer door on the middle
hinge. Ensure that the door is aligned
horizontally and vertically, and that the
gasket seals on all sides before attaching
the top hinge. Attach the top hinge and
replace the hinge cover.

16

5) The appliance has to be unplugged after use and before carrying out user
maintenance on the appliance.

6) This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

7) Children should be supervised to ensure that they do not play with the
appliance.

8) If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.

9) Please abandon the refrigerator-freezer according to local regulators for it use
flammable blowing gas and refrigerant.

10）Please according to local regulations regarding disposal of the appliance for
its flammable refrigerant and blowing gas. Before you scrap the appliance, please
take off the doors to prevent children trapped.

11) Do not use an extension cord.

17

Correct Disposal of this product：

This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.

FR-1020ARW / FR-1020ARS

www.daewooelecusa.com