7.Insert the bottom hinge at the left side using the two screws previously removed in step 6.
NOTE: Do not tighten screws.
8.Stand the cabinet.
9.Replace the door making sure the bottom socket enters the bottom hinge pin.
Be sure washer is in place.
10.While holding the door in the closed position, secure the top hinge at the left side using the two screws previously removed at the beginning in step 2.
Do not tighten the screws until the top of the door is leveled with the top cabinet.
11.Replace the hinge cover.
12.Replace plugs.
13.Tools required:
-8MM & 10MM socket-ratchet. -Putty knife or thin-blade screwdriver.
7
XOJODNJ§HNK
IO NCIOJ§SOBAHNQ
Model NO.
FR-061A / FR-091A / FR-142A
CFC-FREE
CH01
Ieped ncioj¶sobahnem xojodnj¶hnka ipovntazte ]ty nhctpykunq
8
OINCAHNE
FR-061A
# ! $ & * ^ (
FR-091A
!&@$ # ^(*%
FR-142A
$ ) 1@! & # % * ( ^
1.NCIAPNTEJ§:
“Cepdue” xojodnj¶hnka.
O>ecievnbaet oxja[dehne xojodnj¶hnka. Bliojhej ns vnctofo ajqmnhnr.
2.JOTOK DJR C<OPA BODL:
Ipedhashaveh djr c>opa bodl ipn ottanbahnn.
3.TEPMOCTAT
Cjy[nt djr yctahobkn temiepatypl b xojodnj¶hnke.
4.IOJKA c ijactnkoblm iokpltnem, c¢emhar.
5.DBEPHAR IOJKA djr xpahehnr rnu, macja n ipodyktob b mejkoz yiakobke.
6.MAFHNTHAR SAåEJKA:
O>ecievnbaet hade[hoe n ijothoe ipnjefahne dbepul.
7.JOTOK DJR J§DA:
Fotoble ky>nkn j¶da jefko blhnmaqtcr.
8.DBEPHAR IOJKA.
9.DBEPHAR IOJKA djr >ytljok n kpyihlx yiakobok.
10.RåNK djr xpahehnr oboçez n gpyktob.
11.C£EMHAR CTEKJRHHAR IOJKA.
1 |
2 |