Daewoo DWD-FC1212, DWD-FC1012, DWD-FC1213, DWD-FC1022, DWD-FC1023 Service Manual
...
Service Manual
Washing Machine
Model:
DWD-FC1011/FC1012/FC1013/FC1211/FC1212/FC1213
DWD-FC1021/FC1022/FC1023/FC1221/FC1222/FC1223
DWD-FC1031/FC1032/FC1033/FC1231/FC1232/FC1233
DWD-FC1041/FC1042/FC1043/FC1241/FC1242/FC1243
DWD-FC1051/FC1052/FC1053/FC1251/FC1252/FC1253
DWD-FC1061/FC1062/FC1063/FC1261/FC1262/FC1263
DWD-FC1071/FC1072/FC1073/FC1271/FC1272/FC1273
DWD-FC1081/FC1082/FC1083/FC1281/FC1282/FC1283
DWD-FC1091/FC1092/FC1093/FC1094/FC1291/FC1292/
FC1293/FC1294
DAEWOO ELECTRONICS CORP.
S/M No. :
http : //svc.dwe.co.kr Aug. 2013
✔ Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER
WASHING MACHINE
Contents
1. SPECIFICATIONS....................................................................................................................2
2. INSTALLATION .....................................................................................................................10
Removing transit bolts ....................................................................................................10
Installation place requirement.........................................................................................11
BS Plug Safety Details (For U.K. User)..........................................................................11
Connecting inlet hose .....................................................................................................12
Installation of drain hose.................................................................................................13
Level adjustment.............................................................................................................14
3. MAINTENANCE .....................................................................................................................15
Cleaning your washer .....................................................................................................15
Cold condition .................................................................................................................15
Cleaning the water inlet filter ..........................................................................................16
Cleaning the drain pump filter.........................................................................................16
Cleaning the detergent case...........................................................................................17
Cleaning the washing drum ............................................................................................17
4. DIRECTION FOR DISASSEMBLY........................................................................................18
5. EXPLODE VIEW AND PARTS LIST.....................................................................................21
6. FUNCTIONS OF THE CONTROL PANEL............................................................................39
7. FUNCTIONS OF THE CONTROLLER..................................................................................57
8. FUNCTION OF THE CONVENIENT SERVICE.....................................................................60
9. TROUBLESHOOTING GUIDE ..............................................................................................62
10. WIRING DIAGRAM ..............................................................................................................66
1. SPECIFICATIONS
2
SPECIFICATIONS
ADJUSTABLE LEG
CONTROL PANEL
DOOR
DETERGENT CASE
INLET HOSE
HOT
(OPTION)
COLD
LOWER COVER
POWER CORD
HOSE DRAIN
■
DWD-FC1X1X SERIES
■
DWD-FC1X2X SERIES
HOT
(OPTION)
COLD
ADJUSTABLE LEG
CONTROL PANEL
DOOR
DETERGENT CASE
INLET HOSE
LOWER COVER
POWER CORD
HOSE DRAIN
POWER SOURCE 220-240V, 50Hz
DiMENSION (WXDXH) 595mm x 540mm x 850mm
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 47~59
ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 kg
OF TEXTILE SPIN 6 / 6.5 / 7 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2(29.4 ~ 784kPa)
MODEL
3
SPECIFICATIONS
Inlet hose Manual Cap holder(3EA)
DWD-FC1011/FC1012/FC1013/FC1211/FC1212/FC1213
DWD-FC1021/FC1022/FC1023/FC1221/FC1222/FC1223
DWD-FC1031/FC1032/FC1033/FC1231/FC1232/FC1233
HOT
(OPTION)
COLD
■
DWD-FC1X3X SERIES
ADJUSTABLE LEG
CONTROL PANEL
DOOR
DETERGENT CASE
INLET HOSE
LOWER COVER
POWER CORD
HOSE DRAIN
■
Accessories
4
SPECIFICATIONS
HOT
(OPTION)
COLD
■
DWD-FC1X4X SERIES
ADJUSTABLE LEG
CONTROL PANEL
DOOR
DETERGENT CASE
INLET HOSE
LOWER COVER
POWER CORD
HOSE DRAIN
MODEL DWD-FC1041/1042/1043/1241/1242/1243
POWER SOURCE 220-240V, 50/60Hz
DiMENSION (WXDXH) 595mm x 540mm x 850mm
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 47~59
ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 kg
OF TEXTILE SPIN 6 / 6.5 / 7 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2(29.4 ~ 784kPa)
■
Accessories
Inlet hose Manual Cap holder(3EA)
5
SPECIFICATIONS
■
Accessories
POWER SOURCE 220-240V, 50/60Hz
DiMENSION (WXDXH) 595mm x 540mm x 850mm
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 47~59
ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 kg
OF TEXTILE SPIN 6 / 6.5 / 7 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2(29.4 ~ 784kPa)
■
DWD-FC1X5X SERIES
MODEL DWD-FC1051/1052/1053/1251/1252/1253
HOT
(OPTION)
COLD
DOOR
LOWER COVER
ADJUSTABLE LEG
HOSE DRAIN
CONTROL PANEL
POWER CORD
Inlet hose Manual Cap holder(3EA)
6
SPECIFICATIONS
■
DWD-FC1X6X SERIES
POWER SOURCE 220-240V, 50/60Hz
DiMENSION (WXDXH) 595mm x 540mm x 850mm
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 47~59
ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 kg
OF TEXTILE SPIN 6 / 6.5 / 7 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2(29.4 ~ 784kPa)
MODEL DWD-FC1061/1062/1063/1261/1262/1263
DETERGENT CASE
INLET HOSE
HOT
(OPTION)
COLD
DOOR
LOWER COVER
ADJUSTABLE LEG
HOSE DRAIN
CONTROL PANEL
POWER CORD
■
Accessories
Inlet hose Manual Cap holder(3EA)
7
SPECIFICATIONS
■
Accessories
POWER SOURCE 220-240V, 50/60Hz
DiMENSION (WXDXH) 595mm x 540mm x 850mm
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 47~59
ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 / 8 kg
OF TEXTILE SPIN 6 / 6.5 / 7 / 8 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2(29.4 ~ 784kPa)
■
DWD-FC1X7X SERIES
MODEL DWD-FC1071/1072/1073/1271/1272/1273
DETERGENT CASE
INLET HOSE
HOT
(OPTION)
COLD
DOOR
LOWER COVER
ADJUSTABLE LEG
HOSE DRAIN
CONTROL PANEL
POWER CORD
Inlet hose Manual Cap holder(3EA)
8
SPECIFICATIONS
DETERGENT CASE
INLET HOSE
HOT
(OPTION)
COLD
DOOR
LOWER COVER
ADJUSTABLE LEG
HOSE DRAIN
CONTROL PANEL
POWER CORD
■
DWD-FC1X8X SERIES
■
Accessories
POWER SOURCE 220-240V, 50/60Hz
DiMENSION (WXDXH) 595MM x 590MM x 850MM
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 50
ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 / 8 kg
OF TEXTILE SPIN 6 / 6.5 / 7 / 8 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2(29.4 ~ 784kPa)
MODEL
DWD-FC1081/FC1082/FC1083/FC1084/FC1281/FC1282/FC1283
Inlet hose Manual Cap holder(3EA)
ADJUSTABLE LEG
CONTROL PANEL
DOOR
DETERGENT CASE
INLET HOSE
LOWER COVER
POWER CORD
HOSE DRAIN
9
SPECIFICATIONS
■
DWD-FC1X9X SERIES
■
Accessories
POWER SOURCE 220-240V, 50/60Hz
DiMENSION (WXDXH) 595MM x 590MM x 850MM
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 50
ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 / 8 kg
OF TEXTILE SPIN 6 / 6.5 / 7 / 8 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2(29.4 ~ 784kPa)
MODEL
DWD-FC1091/FC1092/FC1093/FC1094/FC1291/FC1292/FC1293/FC1294
Inlet hose Manual Cap holder(3EA)
2. INSTALLATION
10
INSTALLATION
■ Transit bolts
The appliance is fitted with transit bolts to prevent internal damage during transport.
■ Removing transit bolts
1. To prevent internal damage during transport, the
special 3 bolts are locked. Before operating the
washer, remove the bolts along with the rubber
bungs.
• If they are not removed, it may cause heavy
vibration, noise and malfunction.
2. Unscrew the 3 bolts with the spanner supplied,
and take out the 3 bolts with the rubber bungs.
Keep the 3 bolts and the spanner for future use.
• Whenever the appliance is transported, the
transit bolts must be refitted.
3. Close the holes with the caps supplied.
11
INSTALLATION
■ Installation place requirement
■ BS Plug Safety Details (For U.K. User)
Level floor :
Allowable slope under entire washer is 1°.
Power outlet :
Must be with 1.5 meters of entire side of location of
washer. Do not overload the outlet with more than
one appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear / 2cm : right & left side)
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or
coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13amp BS 1362 fuse.
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
This appliance must be earthed
12
INSTALLATION
FOR ORDINARY TAP
6 Connect the inlet hose
adapter of the hose to the
water inlet of the washer by
turning it clockwise to be fixed
tightly.
• Please check the rubber
packing present inside the inlet
hose adapter of the hose.
1 Pull down the collar
of the inlet hose to
separate it from the
water tap adapter.
2 Loosen the four
screws properly in
order to fit into
water tap.
4 Remove the tape,
and screw connector
B into connector A
tightly.
5 Connect the inlet
hose to the water tap
adapter by pulling down
the collar of the hose
end.
3 Fit the water tap adapter into
the water tap and tighten the
four screws evenly while
pushing up the adapter so that
the
rubber packing can stick to the
water tap tightly.
■ Connecting inlet hose
In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the cold water inlet valve.
Option : Be careful not to confuse hot water inlet and cold water inlet.
FOR SCREW-SHAPED TAP
3
Connect the inlet hose adapter
to the water inlet of the washer
and turn it to be fixed.
• Check the packing in the inlet.
1 Connect the inlet hose
to the water tap
adapter by pulling
down the collar of the
hose end.
2
Connect the
connector- inlet
supplied if
necessary.
Inlet Hose
Connector D
Rubber
Packing
Connector C
Connector
Inlet
Rubber
Packing
Connector D
Connector C
Hose
TAPE
Connector B
Connector A
13
INSTALLATION
■ Installation of drain hose■ Installation of drain hose
• The drain hose should not be placed higher than 100cm above the floor.
• Proper securing of the drain hose will protect the floor from damage due to water leakage.
• When the drain hose is too long, do not force back in to the washer. This cause abnormal noise.
Laundry tub
Tie
strap
max. 100 cm
min. 60cm
max. 100 cm
min. 60cm
14
INSTALLATION
■ Level adjustment
1. The level adjustment of the washing machine
prevents excessive noise and vibration.
Install the washing machine on a solid and even
floor surface, if possible, in a corner of the room.
Note: The wooden floor may cause excessive
vibration.
2. If the floor is uneven, adjust the adjustable leg as
the following.
(Do not insert pieces of wood etc. under legs.)
• Please check whether there is any gap between
four adjustable legs and the floor.
• Turn adjustable legs by the enclosed spanner in
order to adjust the level of the washing machine.
• Make it sure that there is no swaying of the
washing machine and check that the washing
machine is even completely. (use a spirit level)
• After the level adjustment is finished, turn fixing
nuts up tightly so that the washing machine
maintains the adjustment.
leg
leg
Fixing Nut
❈ Diagonal Check
When pushing down the edges of the washing
machine top plate diagonally, the machine should
not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top
plate diagonally, adjust legs again.
3. MAINTENANCE
15
MAINTENANCE
❈ Before cleaning the washer interior, unplug the electrical power cord avoid electrical shock hazards.
■ Cleaning your washer
1. Exterior
Proper care of your washer can extend its life.
The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent.
Immediately wipe off any spills. Wipe with damp cloth.
Try not to hit surface with sharp objects.
• Do not use methylated spirits, diluents or similar products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
• Remove hard water deposits using only cleaners labeled as washer safe.
■ Cold condition
If the washer is stored in an area where freezing may occur or moved in freezing temperature,
follow these instructions to prevent damage to the washer.
1. Turn off water supply tap.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into empty wash drum.
Close the door.
5. Set spin cycle and let washer spin for 1minute to drain out all water.
6. Unplug eletrical power cord, dry the drum interior, and close the door.
7. Remove detergent case and dry excessive water from the compartments.
8. Store washer in an upright position.
9. To remove antifreeze from washer after storage, run empty washer through a complete cycle using detergent.
Do not add wash load.
16
MAINTENANCE
■ Cleaning the water inlet filter
• "IE" error message will blink on the control panel when water does not enter the detergent drawer.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
• It is therefore a good idea to clean it from time to time.
■ Cleaning the drain pump filter
• The drain filter collects threads and small objects left in the laundry.
• Check regularly that the filter is clean to ensure smooth running of your machine.
CAUTION Be careful when draining if the water is hot.
1. Turn off the
water tap.
2. Unscrew the
water inlet
hose.
3. Clean the filter
using a had
bristle brush.
4. Tighten up the
inlet hose.
1. Open the lower cover(1) by
using a coin. Turn the cap
hose(2) to pull out the hose.
Pull out the hose maximally.
(About 13~14cm.)
2.
Unplug the cap hose(2), allowing
the water to flow out. At this time use
a vessel to prevent water flowing on
to the floor. When water does not
flow any more, turn the pump
filter(3) open to the left.
3. Remove any foreign material
from the pump filter(3). After
cleaning, turn the pump filter
clockwise and insert the cap
hose(2) to the original place.
Close the lower cover.
1
100
2
3
about
13~14cm
2
3
about
13~14cm
■ Cleaning the water inlet filter
• "IE" error message will blink on the control panel when water does not enter the detergent drawer.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
• It is therefore a good idea to clean it from time to time.
17
MAINTENANCE
■ Cleaning the detergent case
❈ After a while detergents and fabric softeners leave a deposit in the detergent case.
• It should be cleaned from time to time with a jet of running water.
• If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
• To facilitate cleanling, the upper part of the fabric softener compartment can be removed.
Inlet box recess
❈ Detergent can also accumulate inside the recess which should be cleaned
occasionally with an old toothbrush.
• Once you have finished cleaning, replace the detergent case and run a rinse
cycle without laundry.
MAX
max
MAX
max
■ Cleaning the washing drum
• If you live in a hard water area, limescale may continuously build up in places where it cannot be seen and thus
not easily removed.
• Over time the build up of scale clogs appliances, and if it is not kept in check these may have to be replaced.
• Although the washing drum is made of stainless steel, specks of rust can be caused by small metal articles (paper
clips, safety pins) which have been left in the drum.
• The washing drum should be cleaned from time to time.
• If you use descaling agents, dyes or bleaches, make sure they are suitable for washing machine use.
❈ Descaler may contain chemicals that may damage part of your washing machine.
❈ Remove any spots with a stainless steel cleaning agent.
❈ Never use steel wool.
■ Cleaning the detergent case
❈ After a while detergents and fabric softeners leave a deposit in the detergent case.
• It should be cleaned from time to time with a jet of running water.
• If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
• To facilitate cleanling, the upper part of the fabric softener compartment can be removed.
4. DIRECTION FOR DISASSEMBLY
18
DIRECTION FOR DISASSEMBLY
DOOR LOCK SWITCH
1) Open the door and remove the gasket clamp. 2) Remove the gasket from the front cabinet.
HEATER AND THERMISTOR
1) Remove four screws on the back cover, and
remove the back cover.
2) Remove connectors and the earth terminal.
3) Remove two screws, and remove the door lock
switch.
19
DIRECTION FOR DISASSEMBLY
3) Remove the nut by using a box wrench, and
remove the earth terminal.
4) Loosen the nut by using a box wrench, and pull out
the heater.
UNIVERSAL MOTOR
1) Remove the belt from the pulley. 2) Lay the right side of the washer on the floor,
and remove the connector.
3) Remove two bolts and two nuts mounting the motor
by using a box wrench.
4) Remove the motor from the tub.
20
DIRECTION FOR DISASSEMBLY
DRAIN PUMP
1) Lay the right side of the washer on the floor, and
remove the lower panel by pressing six sanp fits.
2) Remove connectors.
3) Remove the screw, and remove the drain pump from
the lower frame.
4) Remove the drain hose.
5) Remove the inner drain hose, and remove the drain
pump.
Loading...