Daewoo DW-5010 Service Manual

Service Manual

Washing Machine

Model: DW-5010

DAEWOO ELECTRONICS CORP.

S/M No. : DW50100001

http : //svc.dwe.co.kr Aug. 2003

✔ Caution

: In this Manual, some parts can be changed for improving,

their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).

AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO

WASHING MACHINE

Contents

1. SPECIFICA TIONS 44444444444444444444444444444444444444444444444444444444444444 2

2. CAUTIONS ON THE OPERA TION 444444444444444444444444444444444444444444444444 3

3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS 4444444444444444 5

4. TROUBLE SHOOTING GUIDE 444444444444444444444444444444444444444444444444444 8

5. HOW TO DISASSEMBLE 444444444444444444444444444444444444444444444444444444 12

6. EXPLODED VIEWS444444444444444444444444444444444444444444444444444444444444 14

7. P ART LIST44444444444444444444444444444444444444444444444444444444444444444444 17

8. WIRING DIAGRAM 444444444444444444444444444444444444444444444444444444444444 20

Power Source

Suffix specifications

Non Pump Pump

AC 110V, 60Hz T TP
AC 120V, 60Hz A AP
AC 220V, 60Hz L LP
AC 120/240(127/220)V, 60Hz D, (S) DP
AC 220V, 50Hz N NP
AC 230~240V, 50Hz M MP
AC100V, 50/60Hz J -

1. SPECIFICATIONS

2

SPECIFICATIONS

NO. ITEM SPECIFICATIONS

1 POWER SOURCE

VOLTAGE AC 127V
FREQUENCY 60Hz

2 POWER NON PUMP 400W

CONSUMPTION PUMP -

3 DEMENSION 440 X 802 X 941 (W X D X H)

4 CAPACITY

WASH 5.0Kg
SPIN 4.0Kg

5 MACHINE NON PUMP NET : 22.5Kg, PACKED : 25.5Kg

WEIGHT PUMP NET : 23.5Kg, PACKED : 26.5Kg
6 WATER LEVEL HIGH : 49l, MEDIUM : 42l, LOW : 35l
7 OPERATING W ATER PRESSURE 0.3 ~ 3.0kgf/cm

2

(3.0 ~ 30.0 N/cm2)

8 REVOLUTION WASH 300RPM

PER MINUTE SPIN 1,700RPM
9 WASHING TYPE Pulsator Type

10 SPIN TYPE Centrifugally Seperated Type
11 TIMER WASH Max. 15Min., Manual Operation

SPIN Max. 5Min., Manual Operation
12 PULSAT OR 6 WINGS (ф300mm)
13 WATER SUPPLY MANUAL

Explanation table for suffixes of model names.

Model name

Pump

DW-XXXX N P

Power source

2. CAUTIONS ON THE OPERATION

3

2-1. INSTALLATION

- Install the washer in the place easy of access to water, electrical power and drainage.

- Install the washer on a firm and flat floor.

- Be sure that the washing machine must be grounded with the external g rounding wire(option) or with the power cord
and electric outlet of the house.

- Avoid installing the machine where it can be exposed to rain or directray of the sun, that may cause trouble or
discoloration. In case the machine has to be installed in such a place, provide a shield top rotect machine from rain or
direct rays of the sun.

- In summer or other periods when there is a great difference between the water temperature and the air temperature,
drops of water may condense on the outs ide of the tub, and the floor might become wet from dripping; be careful o f
this.

- Please disconnect the power cord plug after washing.

2-2. GROUNDING

- Connect the grounding wire(option) to a water faucet if the pipe is made of metal.

- Make sure that the power cord is unplugged during ground work.

- Be sure to wind grounding wire on a metal pipe like Fig1.
(Do not connect the grounding wire end to a gas tube.)

- For maximum security, attach the grounding wire to a copper plate or grounding rod and bury it at least 20cm in the
ground like Fig2.

Fig. 1 Fig. 2

4

2-3. CAUTION ON USE

- Do not use water which contains rust.

- Never put your hands into the tub during wash and rinse process.

- This unit is made of poly-propylene, use water below 50.

- The opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

- Put the wet c lothes into the spindryer drum, being sure that they must be well balanced.

- Place the safety cover horizontally on the top.

- Ensure that the spindryer drum completely stops before reaching in to remove the laundry.

Putting in the clothes
Distribute the clothes in
the tub being sure that
nothin is protruding
out of the top.

Pocket Check
Check the pockets of the
laundry and remove
contents that shouldn’t
be washed before putting
the laundry into the tub.

* Soft Reverse Action is available with DW-5034 non pump model only.

Detergent Amount
If you use too much
detergent. There will be
an excessive amount of
suds and rinsing may be
insufficient: Lim it the
amount of detergent
you use.

Wash

Action

Normal

Reverse

Soft

Reverse

Move Stop

6.8" 4.5"

6.8"4.5"

Acting Time Of Pulsator

5

3. PRINCIPLES OF OPERA TION AND EXPLANATION OF FUNCTIONS

󱇧󱇧

TIMER WASH

- Function

The main switch(T1) remains ON during the washing time set by turning the timer knob.
At the same time, the internal switch(T2) provides Power to wash motor alternately at assigned intervals.

Circuit Diagram

AC(V)

VIOLET

M

MAIN

T1

BLACK

BLUE

MOTOR

WASH

T2

T2

309 (MAX SET)

900'' (300 SET

)

120

T1
Main

6

󱇧󱇧

TIMER SPIN

󱇧󱇧

SAFETY DEVICE FOR MOTORS

- Function

The Spin Timer is the switch providing power to the spin motor(Drain Pump motor) during the set spin dry time,
and is a spring-type time switch comes on upon turning and those contact point comes off after the set time.

In case excessive strain is placed on the motor due to excessive
electricity, over heating, or overloading so that the
temperature of motor reaches to about 130˚C the thermal
protector attached to the motor shuts off the motor automatically.
In the case the motor does not operate, until the temperature of
motor drops to about 85˚C. It takes about an hour.

󱇧󱇧

SAFETY DEVICE FOR SPIN DRYER

The spin dryer is an apparatus which eliminates the water from the laundry through centrifugal separation generated by
rapid revolution(approximately 1700rpm for frequency of 60Hz).
Accordingly, there are a door switch to cut off the power going into the spin motor when door spin o is opened and a
brake system to stop the rotating spin dryer.

Structure and Principle of Activation

Thermal

Protector

MAIN

(Violet)

SUB

(Blue)

Common

(White)