Daewoo DVG-9000N User Manual

Page 1

• 1 •

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated Òdangerous voltageÓ within the productÕs enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS

¥ LASER : This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please

read this ownerÕs manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure.

Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated.

DO NOT STARE INTO THE BEAM.

¥ DANGER : Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

¥ CAUTION : Do not open the top cover. There are no user serviceable parts

inside the Unit; leave all servicing to qualified service personnel.

FCC NOTICE:This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception; which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ¥ Reorient or relocate the receiving antenna. ¥ Increase the separation between the equipment and receiver. ¥ Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

¥ Consult the dealer or an experience radio/TV technical for help.

CAUTION: Any changes or modification in construction of this device which are not expressly

approved by the party responsible for compliance could void the userÕs authority to operate the equipment.

CLASS 1 LASER PRODUCT

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`1

Page 2

• 2 •

IMPORTANT SAFEGUARDS (Continued)

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.

1 READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2 RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3 HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4 FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5 CLEANING

Unplug this

unit

from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

6 ATTACHMENTS

Do not use attachments unless recommended by the unitÕs manufacturer as they may cause hazards.

7 WATER AND MOISTURE

Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

8 ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult as well as serious damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or table recommended by the manufacturer.

A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the video product and cart combination to overturn.

9 VENTILATION

Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturerÕs instructions have been adhered to.

10 POWER SOURCES

This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your video dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11 GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way.

PORTABLE CART WARNING

(symbol provided by RETAC)

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`2

Page 3

• 3 •

IMPORTANT SAFEGUARDS (Continued)

This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized cord.

12 POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.

13 LIGHTNING

For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14 DISC TRAY

Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.

OVERLOADING

Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.

16 OBJECT AND LIQUID ENTRY

Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or Òshort-outÓ parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

17 BURDEN

Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious damage to the product.

18 DISC

Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

19 SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20 DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions.

A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a

qualified technician to restore the unit to its normal operation. E. If the video product has been dropped or the cabinet has been damaged. F.

When the unit exhibits a distinct change in performance-this indicates a need for service.

21 REPLACEMENT PARTS

When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the unit manufacturer can prevent fire, electric shock, or other hazards.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`3

Page 4

• 4 •

IMPORTANT SAFEGUARDS (Continued)

22 SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks recommended by the manufacturer to determine that the unit is in safe operating condition.

23 WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

24 HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`4

Page 5

• 5 •

TABLE OF CONTENTS

1. IMPORTANT SAFEGUARDS ---------------------1

2. TABLE OF CONTENTS ----------------------------5

3. FEATURES---------------------------------------------6

4. ABOUT MANUAL-----------------------------------7

5. PLAYABLE DISCS-----------------------------------7

6. TERMS FOR DISCS ---------------------------------8

7. BEFORE OPERATION ----------------------------10

8. PRECAUTIONS FOR DISC ----------------------10

9.PREPARATIONS BEFORE OPERATION ------11

¥ CHECK ACCESSORIES-------------------------11

¥ USE REMOTE CONTROL----------------------11

¥ FRONT PANEL -----------------------------------12

¥ DISPLAY -------------------------------------------13

NAMES AND LAYOUT OF REMOTE CONTROLS

--14

¥ REAR PANEL -------------------------------------15

10. CONNECTIONS-----------------------------------16

11. BASIC OPERATIONS ----------------------------19

¥ PLAY DISCS ---------------------------------------19

¥ SYSTEM SETTING-------------------------------20

¥ STEP, PAUSE---------------------------------------20

¥ OSD --------------------------------------------------20

¥ VOLUME CONTROL----------------------------21

¥ DVD MENU PLAY -------------------------------21

¥ MP3 PLAY ------------------------------------------21

¥ PBC PLAY ------------------------------------------22

¥ SELECT WITH NUMBER BUTTONS -------22

12. PLAY DISCS IN VARIOUS WAYS ------------23

¥ SELECT LANGUAGE ---------------------------23

¥ SELECT CHANNEL------------------------------23

¥ MUTE------------------------------------------------23

¥ FAST PLAY-----------------------------------------24

¥ SLOW PLAY ---------------------------------------25

¥ REPEAT PLAY-------------------------------------25

¥ PLAYING A DISC REPEATEDLY ------------25

¥ REPEAT SOME PARTS --------------------------26

¥ SELECT SUBTITLES ----------------------------27

¥ SELECT ANGLES --------------------------------28

¥ 3D SURROUND -----------------------------------28

¥ TIME SEARCH AND REMAINING TIME--29

¥ RESUME PLAY -----------------------------------31

¥ ZOOM PLAY ---------------------------------------31

¥ PROGRAM PLAY---------------------------------32

¥ DIGEST PLAY -------------------------------------32

¥ PLAY KARAOKE---------------------------------34

13. FUNCTION SETTING---------------------------35

¥ GENERAL SETUP --------------------------------36

¥ SPEAKER SETUP---------------------------------38

¥ DOLBY DIGITAL SETUP-----------------------39

¥ DOLBY SURROUND SETUP------------------40

¥ PREFERENCES -----------------------------------40

14. TROUBLESHOOTING---------------------------42

15. TECHNICAL SPECIFICATIONS --------------43

16. REGIONAL RESTRICTION CODE-----------44

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`5

Page 6

• 6 •

FEATURES

❏ OUTSTANDING SOUND QUALITY

Dolby Digital system developed by Dolby Laboratories and DTS developed by DTS Inc., features high quality surround sound, can be played in DVD or CD disc at home, to reproduce high quality sound effects.

❏ HIGH DEFINITION

The unit adopts MPEG2 coding format and brings the horizontal resolution over 500 lines.

❏ UNIQUE FUNCTIONS

Multi-angle and multi-language bring unique trick functions.

Parent lock makes it easy to control the content of discs.

❏ SCREEN

Ordinary screen and wide screen (16:9) are available.

❏ COMP

ATIBILITY

The unit can play DVDs, and is compatible with CDs.

❏ ZOOM

It can enlarge pictures 1.5 times, twice or four times their size.

❏ 9-PICTURE DIGEST (VCD)

It can look through the content of discs and select to play.

❏ MUL

TI-FUNCTIONS

Fast forward, fast reverse, slow play, frame play , repeat play and program play.

❏ TIME SEARCH

It can search a specific part on a disc, especially good for watching fiction movies.

❏ RESUME PLA

It can memorize the position where the disc is stopped and resume playback.

❏ CONTENT DISPLA

It adopts (a colored) fluorescent display and English/French/Spanish OSD, making the disc content clearer.

❏ VIDEO OUTPUT

Standard video, S-video signal output mode and component output easy system change.

❏ AUDIO OUTPUT

Analog audio output, coaxial and optical digital audio output, can be connected with the appropriate amplifier to enjoy high quality sound effects.

❏ 5.1 CHANNEL ANALOGUE AUDIO OUTPUT

Six phono sockets for analogues 5.1 channel audio output in order to connect to an amplifier with analogue 5.1 channel input terminal. They are FRONT left, FRONT right, SURROUND left, SURROUND right, SUBWOOFER, CENTER respectively.

❏ MIC

Used to make connection with the MIC. Please insert the MIC jack into this socket. The downmix mode is selected analog audio out whenever the MIC are plugged in.

❏ MIC LEVEL

Used to adjust the MIC volume.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`6

Page 7

• 7 •

ABOUT MANUAL

¥ This manual mainly introduces how to

use buttons on the remote control.

¥ You may operate the unit if the buttons

on the unit have the same or similar names as or to those on the remote control.

¥ The marks shown in the chart on the

right are used in the manual.

MARK

INDICATION

functions of DVD

functions of super-VCD

TYPE

DVD

MARK CONTENT

audio+video

(motion

pictures)

audio

SIZE

12cm

about 2hrs (single-side disc)

about 8hrs (double-side disc)

about 80mins (single-side disc)

about 160mins(double-side disc)

about 74mins

about 20mins

8cm

12cm

8cm

PLAYING TIME

DVD

SVCD

VCD

PRINCIPLES FOR WRITING

PLAYABLE DISCS

Super-VCD

audio+video

(motion pictures)

12cm

about 45mins

VCD

audio+video

(motion pictures)

12cm

8cm

about 74mins

about 20mins

MP3

audio

12cm about 160mins

about 600mins

functions of VCD

functions of CD

CD-R

audio

12cm

CD-RW

audio

12cm

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`7

Page 8

• 8 •

REGION MANAGEMENT INFORMATION

This unit is designed and manufactured to respond to the Region Management information that is recorded on a DVD disc. The region number of this player is Ò1Ó. If the region number described on the DVD discs does not correspond to the Region number of this player, the player will not play this disc. This player will play DVD discs made for ÒALLÓ regions. Therefore, this player will play DVD discs marked with labels containing the region number Ò1Ó or ÒALLÓ.

(Region 1) (Region ALL)

TERMS FOR DISCS

The images or music of a DVD are divided into some units, among which title is the biggest one.

When playing a DVD, the movie is the title.

When playing a CD, the combined tracks make up the title.

It is smaller than title among the units of a DVD. A title is made up of several chapters , and each chapter has a number for search. But some discs may not have numbered chapters.

In a CD, each track has a number to enable search functions.

DISC

TITLE

CHAPTER

DISC

TRACK

TITLE

CHAPTER

TRACK

STRUCTURE OF DVD

STRUCTURE OF CD

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`8

Page 9

• 9 •

TERMS FOR DISCS (Continued)

The menu pictures, motion and motionless pictures of a Super-VCD, VCD or CD with PBC function can be divided into some parts, these parts are scenes. Each scene has a number for search.

SCENE

PBC (PLAYBACK CONTROL) (SUPER-VCD, VCD)

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

It is signals recorded in a super- VCD or VCD2.0 to control playback.

DISC TYPE

VCD1.1

without PBC

FUNCTION

enjoy music and images (motion pictures)

super-VCD and VCD with

PBC

Besides the images of VCD1.1, play interactive software with the menu pictures shown on the TV screen (PBC play). If the disc has motionless pictures, high-resolution playback is also available.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`9

Page 10

• 10 •

BEFORE OPERATION

¥ Before operation, check if the voltage of the unit is in line with the local voltage. ¥ Hold the plug to disconnect it from the mains outlet. Do not pull the power cord. ¥ When the plug of the unit is connected to the mains outlet , the unit will be still

connected to AC even if the power is turned off.

¥ Disconnect the plug as soon as liquid or objects enter the unit. The unit can not be used

until being checked by experts.

¥ Do not open the cabinet as laser rays employed by the unit may damage eyes. Any

servicing should be done by qualified service personnel.

¥ Put the unit where ventilation is good enough to prevent overheating. ¥ Never put the unit in direct sunlight or near heat sources. ¥ Put the unit horizontally, never put any heavy object on the unit. ¥ To protect the pickup, do not put the unit where there is dust. If there is dust on the

pickup, use a cleaning disc to clean it. Paying particular attention to the operating instructions of the cleaning disc.

Moisture will appear on the pickup lens in the following cases:

¥ The unit is suddenly moved from a cold place to a warm place. ¥ The unit is put in a room with a heater, or in cold air from an air-conditioner. ¥ Using the unit in a humid place. In these cases, the unit can not work. Unload the disc

and leave the unit on for about one hour to evaporate the moisture.

¥ Use a soft cloth with a little neutral detergent to wipe the cabinet, panel and controls.

Never use abrasive paper, polishing powder, solvent like alcohol or gasoline.

SECURITY

PRECAUTIONS FOR DISC

HANDLING DISC CLEANING DISC

PLACEMENT

CONDENSATION

CLEANING

¥ To keep the disc clean, do not touch the

playsides of the disc.

¥ Do not attach paper or tape to the disc.

¥ Keep the disc away from direct

sunlight or heat sources.

¥ Store the disc in a disc case after

playback.

¥ Before playback,

wipe the disc outwards from the centre with clean cloth.

¥ Do not use any type of solvent such as

thinner, benzine, commercially available cleaners or antistatic spray.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`10

Page 11

1. Open the battery compartment.

2. Insert two AAA batteries, make sure to match"+"and ""of the batteries to the marks in the battery compartment.

3. Close the battery compartment.

4. Point the remote control at the remote sensor. It will operate up to a range of 7 meters and an angle of 30¡ either side of the remote sensor on the front of the player.

• 11 •

PREPARATIONS BEFORE OPERATION

This part introduces the work to be done before operating the unit.

Check if you have all the accessories after the carton is opened.

CHECK ACCESSORIES

USE REMOTE CONTROL

Notes:

1. Batteries can generally last for about 6 months. Change the batteries if the remote control does not work, or the operating range reduces.

2. If the remote control is not used for a long time, remove the batteries to prevent battery leakage.

3. When appears on the TV screen by pressing the Button, the disc does not have the pertinent button.

OSD

SUBTITLE

ANGLE

SET UP

V-MODE

TITLE.PBC

INTRO

REPEAT

P/N

RETURN

A-B

STEP

PROGRAM

ZOOM

SLOW

A-TIME

MEMORY

CHANNEL

LANGUAGE

MUTE 3D

123

654

0/10

10+

VOLUME

PLAY

Remote control

AAA batteries

Video/Audio cord

OwnerÕs manual

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`11

Page 12

• 12 •

PREPARATIONS BEFORE OPERATION (Continued)

FRONT PANEL

! STANDBY/ON button

To switch the unit On or Off when connected to AC power outlet

@ MIC JACK # MIC LEVEL $ STOP % SETUP ^ OPEN/CLOSE button

To open or close the disc tray.

& PLAY button

Use this button to play the disc.

* DIRECTION button

Used to move to the desired menu and moves the image center of an enlarged screen in zoom mode. Also can be used in marker or display function.

( REMOTE SENSOR

Receives a light signal from the remote controller.

) DISPLAY

Displays operation status.

1 POWER INDICATOR 2 DISK TRAY

To load or unload a disc. Put a disc to be played on here.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`12

Page 13

• 13 •

PREPARATIONS BEFORE OPERATION (Continued)

DISPLAY

! PLAY/PAUSE/STEP

Illuminates the current operation mode.

@ PBC

Indicates the PBC PLAY under play SVCD or VCD2.0.

# DVD/SVCD/VCD

Illuminates the type of a disc loaded on disc tray.

$ DTS

Indicates the audio type of the disc under play is DTS.

% AC-3

Indicates the audio type of the disc under play is DOLBY DIGITAL.

^ AUDIO INDICATION

Illuminates the information of the AUDIO.

& MUTE

Illuminates when MUTE mode.

* REPEAT 1, ALL, A-B

Illuminates when the current play mode is under repeat title, chapter, track (single), disc (all), A-B respectively.

( RESUME

Illuminates when RESUME mode.

) TRACK CALENDAR

Illuminates the information of the TRACK.

1 OVER

Illuminates the over than 16 track under play CD or VCD.

2 ROTATION

Rotates when the disc is spinning

3 TITLE/CHAPTER/TRACK

Illuminates the information of the TITLE, CHAPTER or TRACK of the DVD and CD disc under play.

4 VOLUME LEVEL

Indicates the volume level of analog audio output.

! @ # %

* )

& (^

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`13

Page 14

• 14 •

PREPARATIONS BEFORE OPERATION (Continued)

! STANDBY/ON @ OSD # SUBTITLE $ ANGLE % SETUP ^ V-MODE & TITLE.PBC * LEFT DIRECTION ( SYSTEM(AUTO/NTSC/PAL)

CONVERT

) DOWN DIRECTION 1 RETURN 2 MENU 3 STEP PLAYING 4 PROGRAM PLAYING 5 SLOW PLAYING 6 TIME-SEARCH PLAYING 7 CHANNEL CONVERT 8 LOWER TONE 9 LANGUAGE SWITCH 0 FAST BACKWARD /

FAST FORWARD SEARCH

“

ONE CHAPTER/TRACK PREV/NEXT

‘ PAUSE + STOP = ATONIC TONE Q RAISE TONE q

MEMORY (RESUME) PLAYING

W VOLUME (-/+) w ZOOM PLAYING E A-B e REPEAT PLAYING R PLAY (ENTER) r RIGHT DIRECTION T INTRO t UP DIRECTION Y NUMBER (1~ 10+) y OPEN/CLOSE U 3D PLAYING u MUTE

NAMES AND LAYOUT OF REMOTE CONTROLS

OSD

SUBTITLE

ANGLE

TITLE.PBC

INTRO

REPEAT

P/N

RETURN

A-B

STEP

PROGRAM

ZOOM

SLOW

A-TIME

MEMORY

CHANNEL

LANGUAGE

123

654

0/10

10+

VOLUME

PLAY

@ # $ %

3 5

7 9

0“

‘

(

)

6 8

MUTE 3D

SET UP

V-MODE

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`14

Page 15

• 15 •

PREPARATIONS BEFORE OPERATION (Continued)

! DIGITAL AUDIO COAXIAL/OPTICAL OUT

Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the theatre-quality sound in your home.

@ VIDEO OUT

Connects composite video signal to input AV or PHONO sockets of TV or monitor to achieve high fidelity colour reproduction.

# 5.1 CHANNEL ANALOGUE AUDIO OUT

In Dolby Digital and dts, total 6 channels are used. 3 channels for front, 2 channels for surround and 1 channel for subwoofer. They are front left, front right, center, subwoofer, rear left and rear right. L stands for front left, R for front right, C for center, LFE for subwoofer, LS for rear left surround and RS for rear right surround.

$ S-VIDEO OUTPUT

Connects to TV or monitor equipped with S-VIDEO input. In order to achieve a sharper and cleaner picture than that when connected via VIDEO OUT (composite video).

% COMPONENT(Y/Pb/Pr) VIDEO OUT

Connects to TV or monitor equipped with Component input . In order to achieve a sharper and cleaner picture than that when connected via VIDEO OUT (composite video).

^ VGA OUT

Connects to PC monitor. In order to achieve a sharper and cleaner picture than that when connected via VIDEO OUT (composite video).

& POWER SUPPLY SOCKET WIRE

Creates POWER between wall outlet and the unit.

* POWER SWITCH

Turn on or off the main power.

- ON : Press Ò Ò.

- OFF : Press Ò Ò.

REAR PANEL

Notes:

Remove the dust protection cap from the optical digital audio output connector and connect the

cable firmly so that the configurations of both the cable and connector match.

Do not connect to the digital audio input of an amplifier that does not have Dolby Digital and dts

decoder when you set the digital out option of setup information to SPDIF/RAW.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`15

Page 16

• 16 •

CONNECTIONS

1. If the TV has S -VIDEO input, please connect the unit and the TV with S-video cord (not supplied). You do not have to utilize S-VIDEO but it will give clearer images.

2. Set the unit. You have to set the unit according to the TV connected.

If the system of the TV is AUTO (multi-system), press P/N and select AUTO.

If the system of the TV is NTSC, press P/N and select NTSC.

If the system of the TV is PAL, press P/N and select PAL.

Connect the unit to a wide-screen TV. Set the "TV DISPLAY" to "WIDE " in the function setting column.

Connect the unit to an ordinary TV. Set the "TV DISPLAY" to "NORMAL/ PS" (Pan scan) or "NORMAL/ LB" (Letter box) in the function setting column.

Turn off all equipment before operation.

The unit has many kinds of output modes like A/V output, S-VIDEO output and digital signal output (OPTICAL, COAXIAL). You may select as you need.

CONNECTED TO A TV

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`16

Page 17

• 17 •

CONNECTIONS (Continued)

If the TV has component input, please connect the unit and the TV with component

cord (not supplied). You do not have to utilize component but it will give clearer images.

CONNECTED TO A TV WITH COMPONENT

Notes:

¥ In case of connecting the component, press the V-MODE on the remote control to

select P-YUV.

¥ In case of connecting the VGA OUT (D-JACK), press the V-MODE on the

remote control to select P-RGB.

When you connect the Composite or S-VIDEO and picture is not displayed, press the

V-MODE on the remote control to check if DVD player position in the video mode.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`17

Page 18

• 18 •

CONNECTIONS (Continued)

¥ Optical or coaxial can be selected at your option while connecting

¥ If you have a DTS decoder of processor, you can enjoy DVD disc or CD sound

decoded by 5.1 channel DTS. ie : 5 surround speakers + 1 woofer

¥ Refer to page 39 for the setting.

Manufactured under license from Dolby Laboratories. "Dolby", ÒPro LogicÓ and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.

"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.

CONNECT TO AN AUDIO AMPLIFIER

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`18

Page 19

• 19 •

BASIC OPERATIONS

TV/AUDIO SELECTION

Press on the TV and audio system.

1. Press "TV/VIDEO" on the TV, select VIDEO mode (TV).

¥ Select S-VIDEO mode if using an ÔSÕ

Video connection.

2. Select the right audio input on the amplifier.

¥ Each amplifier is different from

another, please refer to the manual of the amplifier.

(e.g., connect the audio output of the DVD player to the DVD audio input of an amplifier.)

DVD/LD

TV/VIDEO

PLAY DISCS

Notes: This step can be cancelled if you do not connect it to the amplifier.

1. Press to turn on the unit.

2. Press to open the disc tray and load a disc with the label side.

3. Press again to close the disc tray. The unit begins to read the disc.

4. Press to play the disc.

AFTER STEP4 IS FINISHED:

¥ PLAY DVD

The TV screen shows the DVD menu and title menu.

¥ PLAY SUPER-VCD, VCD2.0

The TV screen shows the menu, the unit enters PBC status.

¥ PLAY CD, VCD1.1, MP3

Press , the unit plays the disc according to the track numbers.

5. Stop playback.

Press .

¥ You have to press this

button twice to stop the playback of a DVD.

Unload the disc and turn off the unit. Press and again.

- REMOTE CONTROL -- FRONT PANEL -

PLAY

STANDBY/ON

Notes: If the power is not turned on, check whether the power switch on the rear of DVD is turned on.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`19

STANDBY/ON

Page 20

• 20 •

Press STEP .

WHEN PLAYING DVD PICTURES, VCD

Press STEP to make the playback step. Pressing

STEP again moves the

picture forward frame by frame.

WHEN PLAYING MUSIC CD, MP3

Press to make the playback pause.

Press to resume playback.

Press OSD , when the unit is operated, the TV screen shows the operation functions and information about the disc.

¥ Remove the OSD, press

OSD 4 times.

BASIC OPERATIONS (Continued)

According to the system of the TV to be connected ,set the system of the unit to make it match the TV.

1. If the system of the TV is NTSC : Press

P/N , select NTSC.

The screen shows:

2. If the system of the TV is PAL :Press

P/N , select PAL.

The screen shows:

3. If the TV is multi-system : Press

P/N , select AUTO.

The screen shows:

TITLE.PBC

INTRO

REPEAT

P/N

RETURN

A-B

PLAY

STEP

PROGRAM

ZOOM

SLOW

A-TIME

MEMORY

CHANNEL

LANGUAGE

VOLUME

NTSC

PAL

AUTO

STEP

SYSTEM SETTING

STEP, PAUSE

OSD

SUBTITLE

ANGLE

SET UP

MUTE 3D

123

654

0/10

10+

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`20

PLAY

Page 21

• 21 •

BASIC OPERATIONS (Continued)

Some DVDs have title menus and chapter menus.

1. Press MENU or TITLE , the screen shows the menu. Use direction buttons to select the desired item, then press .

2. Press

TITLE once to return to the title

menu; press it again to return to the current playback. Press

MENU once to return to the root

menu; press it again to return to the current playback.

STEP

PROGRAM

ZOOM

SLOW

A-TIME

MEMORY

CHANNEL

LANGUAGE

VOLUME

Press VOLUME on the TV or amplifier to adjust the volume.

Press VOLUME on the remote control.

1. Press + to raise the volume.

2. Press - to lower the volume.

VOLUME CONTROL (EXCEPT SPDIF/RAW)

DVD MENU PLAY

Notes:

When appears on the TV screen by pressing TITLE . The disc does not have the title list in the menu.

¥ When appears on the TV screen

by pressing MENU . The disc does not have the menu.

MP3 PLAY

1. When an MP3 disc is loaded, MP3 menu screen is displayed automatically depending on MP3 discÕs folder (directory) structure as shown below.

OTHER FUNCTIONS

When playing a MP3 disc, the unit has functions like mute, volume control, pause, previous/next track, repeat and channel selection. You may operate as you do with a CD.

2. Use the direction button to select the

folder you want to play, by pressing the PLAY button. This button allows, you to see the file lists under the folder.

3. Use the direction button and select an

MP3 title using the PLAY button then play will start automatically. When you know the title number, enter the MP3 title number using the numeric buttons on the remote control and then press the PLAY button.

4. Press NEXT button on the remote

control to choose next title. Press PREV button for previous title. When you know the title number, enter MP3 title number using the numeric buttons on the remote control and then press the PLAY button.

PLAY

SMART NAV1 CD-1 CD-2 CD-3

CD-1 0 MP3 01-ABC 1 MP3 02-BCE 2 MP3 03-EIC 3 MP3 04-FGH 4 MP3 05-ADC 5

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`21

Page 22

• 22 •

BASIC OPERATIONS (Continued)

1. If the track number is less than 10, just press buttons 1-10.

Example: press 8 to select track 8.

The screen shows:

2. If the track number is over 10, press 10+ once and a button among 1-10.

Example: if you select track 12, press 10+ once and button 2.

The screen shows:

SELECT 08 00:00:21

SELECT 12 00:00:00

SELECT WITH NUMBER BUTTONS (IN CASE OF CD)

When playing a super-VCD or VCD2.0, you can enjoy the basic interactive function.

Example: VCD2.0

1. Press , the screen shows the home menu.

2. Press number buttons to select.

Example: select home menu1.

3. The screen shows the sub-menu after the unit enters home menu1.

4. Press , to see the previous or next page.

5. Press number buttons to select submenus.

6. Press

RETURN to return to the sub-

menu, press it again to return to the home menu.

PBC PLAY

EXCHANGE DISCS

1. Press to open the disc tray.

2. Unload the disc and load another one.

3. Press again to close the disc tray.

Load a disc. Press number buttons to select tracks after the unit finishes reading the disc.

10+

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`22

Page 23

• 23 •

PLAY DISCS IN VARIOUS WAYS

WHEN PLAYING DVD

Press LANGUAGE , the screen shows as below.

Press

LANGUAGE again.

Different discs differ in languages.

When playing a disc, this function can remove the sound.

1. REMOVE SOUND

Press

MUTE , the screen shows

"MUTE".

2. RESUME SOUND

Press

MUTE again.

AUDIO 1/2:AC-3 2CH ENGLISH

AUDIO 2/2:AC-3 5.1CH ENGLISH

SELECT LANGUAGE

WHEN PLAYING CD

You may select one mode.

MUTE

CHANNEL

MONO LEFT

MONO RIGHT

STEREO

Note:

¥ Different discs differ in languages.

¥ CHANNEL works when playing a

super-VCD, you may select mono channel (left or right) or stereo.

¥ As to a two-language fiction VCD,

you may press

LANGUAGE to select

a needed language.

MUTE OFF

SELECT CHANNEL

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`23

Page 24

• 24 •

PLAY DISCS IN VARIOUS WAYS (Continued)

When playing a disc, you may play it in Cue or Review mode to find what you want.

WHEN PLAYING DVD

1. Press to play forward fast. Each time you press the button, the screen shows in order:

2. Press to reverse the disc fast. Each time you press the button, the screen shows in order:

3. Press to switch back to normal play.

WHEN PLAYING SUPER-VCD or VCD

1. Press to play forward fast. Each time you press the button, the screen shows in order:

2. Press to reverse the disc fast. Each time you press the button, the screen shows in order:

WHEN PLAYING CD, MP3

1. Press to play forward fast.

2. Press to reverse the disc.

3. Release (or ) to play normally.

FF 2X

FF 4X

FF 8X

FF 16X

FF 32X

PLAY

FAST PLAY

FF 1X

FF 2X

FF 3X

FF 4X

PLAY

FR 1X

FR 2X

FR 3X

FR 4X

PLAY

FR 2X

FR 4X

FR 8X

FR 16X

FR 32X

PLAY

Notes: In case of fast play (DVD) mode , slow play mode or step mode, the sound is muted.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`24

Page 25

• 25 •

3. Remove "REPEAT" function.

Press REPEAT , to remove the display on the screen.

REPEAT

CHAPTER REPEAT ON

DVD

You may repeat a title or chapter.

1. Repeat a chapter.

Press REPEAT , the screen shows:

"CHAPTER REPEAT ON".

2. Repeat a title

Press

REPEAT , the screen shows:

ÒTITLE REPEAT ONÓ

CHAPTER REPEAT ON

TITLE REPEAT ON

REPEAT OFF

PLAYING A DISC REPEATEDLY

REPEAT

TITLE REPEAT ON

Enjoy slow motions by the following steps.

WHEN PLAYING DVD

1. Press SLOW to play slowly.

The screen shows in order:

SLOW PLAY

2.Press to play normally.

SF 2X

SF 4X SF 8X

SR 2X

SR 4X SR 8X

SLOW

WHEN PLAYING SUPER-VCD or VCD

1. Press SLOW to play slowly. The unit has three steps for slow play.

The screen shows orderly.

2.Press to play normally.

SF 1X

SF 2X

SF 3X

PLAY

SLOW

This function can be used to repeatedly play a title, chapter, track, disc or some parts on a disc.

REPEAT PLAY

PLAY DISCS IN VARIOUS WAYS (Continued)

REPEAT

P/N

RETURN

A-B

STEP

PROGRAM

ZOOM

SLOW

A-TIME

MEMORY

CHANNEL

VOLUME

PLAY

A-B

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`25

RETURN

STEP

SLOW

CHANNEL

LANGUAGE

PROGRAM

A-TIME

A-B

ZOOM

VOLUME

MEMORY

PLAY

Page 26

• 26 •

PLAY DISCS IN VARIOUS WAYS (Continued)

REP-ONE

REP- ALL

REP- ONE REP- ALL REPEAT OFF

2. Repeat a CD

Press

REPEAT , the screen shows:

"REP- ALL".

REPEAT OFF

3. Remove "REPEAT" function.

Press

REPEAT , to remove the display

on the screen.

Super-VCD, VCD, CD, MP3

¥ You may repeat a track, a disc

according to the following steps

¥ VCD 1.1 and CD can play repeatedly

directly.

¥ Super VCD and VCD 2.0 can play

repeatedly in PBC OFF mode.

¥ After the unit stops, press number

buttons directly to select tracks.

1. Repeat one track

Press REPEAT , the screen shows:

"REP- ONE".

You may press A-B to enjoy some parts repeatedly when playing a disc.

PLAY DVD, SUPER-VCD, VCD, CD

1. Set a starting point A.

The screen shows:

2. Set an end point B.

The screen shows:

3. Remove A-B repeat

The screen shows:

Afterwards, the unit plays from A to B.

A TO B SET A

A TO B SET B

REPEAT SOME PARTS (EXCEPT MP3)

REPEAT

A-B

A TO B CANCELLED

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`26

Page 27

• 27 •

PLAY DISCS IN VARIOUS WAYS (Continued)

When playing a multi-subtitle DVD or super-VCD, you may select one subtitle to show it on the screen.

SELECT SUBTITLES

WHEN PLAYING DVD

1. Press SUBTITLE to select one.

The screen shows:

2. Remove the subtitle.

Press

SUBTITLE until the screen

shows "SUBTITLE OFF".

SUBTITLE

SUBTITLE 01/03:ENGLISH

Notes:

¥ For some discs, subtitles can not be

removed.

¥ Different discs differ in the

languages of subtitles.

¥ If the subtitles of discs can not be

selected, press

SUBTITLE , the

screen shows forbidden mark .

SUPER-VCD

A super-VCD has only four channels for recording, so it has four subtitles at the most.

Press SUBTITLE , the screen shows orderly:

You may select a subtitle as you need. Some discs may not have "SUBTITLE OFF" function.

SUBTITLE 01/04

SUBTITLE 02/04

SUBTITLE 03/04

SUBTITLE 04/04

SUBTITLE OFF

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`27

OSD

123

SUBTITLE

ANGLE

SET UP

10+

654 9

0/10

Page 28

• 28 •

PLAY DISCS IN VARIOUS WAYS (Continued)

Some discs have images with different screen angles, you may select among them. For example,when you watch a running train, you may select to watch it from the front, the left window or the right window without stopping it.

OSD

SUBTITLE

ANGLE

SET UP

V-MODE

TITLE.PBC

INTRO

123

654

0/10

10+

Example:

A DVD has four screen angles at your option.

1. Press ANGLE to select ANGLE1.

2. Press

ANGLE to select other angles,

the screen shows respectively:

3. Resume normal playback. Press

ANGLE until there is no display on

the screen.

2/4 (select ANGLE2)

3/4 (select ANGLE3)

4/4 (select ANGLE4)

1/4

SELECT ANGLES 3D SURROUND

SCREEN

This function outputs 3D effects on the stereo audio analog output 3D effects are broken down into 4 surround modes.

OSD

SUBTITLE

ANGLE

MUTE 3D

123

654

1. Press 3D button. 3D SURROUND MODE 1 is displayed on TV screen. And analog stereo output is changed to surround mode 1.

2. Press 3D button again. Press the 3D button continuously until the desired 3D sound mode is selected.

3D SURROUND 1

Notes: This 3D function is operated in case only that the AUDIO OUTPUT is set to the ANALOG or SPDIF/PCM.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`28

Page 29

• 29 •

PLAY DISCS IN VARIOUS WAYS (Continued)

A-TIME

STEP

PROGRAM

ZOOM

SLOW

A-TIME

MEMORY

CHANNEL

LANGUAGE

VOLUME

2. Time search ¥ Press A-TIME until the screen

shows:

¥ Press number buttons to enter hour,

minute and second.

Example: Enter 0, 1, 0, 2, 3, 8

After setting, the disc is played from 01:02:38.

PLAY SUPER-VCD, VCD, CD

You can only enter a time to search the content from that time.

Example: Play from 01:38 of track 6.

1. Press button 6 to select track 6. The screen shows:

2. Press A-TIME , the screen shows:

3. Press button 0, 1, 3, 8 to enter the time. The screen shows:

¥ The unit plays from 01:38 of track 6

after setting.

¥ Press

0/10 to enter 0.

You may directly enter a time, title or chapter number to search fast on a disc, the unit plays from the point entered.

PLAY DVD

1. Search a title or a chapter.

Example: Search chapter 2 in title 2.

¥ Press A-TIME , the screen shows:

¥ Press the left or right button and

move the cursor to illuminate the title number. The screen shows:

¥ Press button 2 to select title 2, the

screen shows:

¥ Repeat the steps above, select

chapter 2 in title 2.

SELECT: 06

GO TO

_ _ : _ _

GO TO 01:38

TIME SEARCH AND REMAINING TIME

TIME SEARCH

TITLE 03/03 CHAPTER 01 /04

TITLE 02/03 CHAPTER 01 /04

TITLE 02/03 CHAPTER 02 /04

TITLE 03/03 CHAPTER 01 /04

TITLE 02/03 TIME : :

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`29

Page 30

• 30 •

PLAY DISCS IN VARIOUS WAYS (Continued)

This function can be used to know the remaining time of a title, chapter or track.

DVD

1. Press OSD , the screen shows the remaining time of the title.

2. Press OSD , the screen shows the playing time of the chapter.

3. Press

OSD , the screen shows the

remaining time of the chapter.

SUPER-VCD, VCD, CD

Example: Check the remaining time when playing track 2.

1. Press OSD , the screen shows the playing time of the track.

4. Press OSD again, the screen shows the remaining time of the disc.

5. Press OSD once more, the screen shows:

OSD

CHAPTER REMAIN 00:01:19

TITLE REMAIN 00:56:45

CHAPTER ELAPSED 00:02:41

SINGLE ELAPSED 00:04:23

TOTAL REMAIN 00:33:23

OFF

REMAINING TIME

2. Press OSD , the screen shows the remaining time of the track.

3. Press OSD , the screen shows the playing time of the track.

SINGLE REMAIN 00:01:25

TOTAL ELAPSED 00:04:25

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`30

Page 31

• 31 •

PLAY DISCS IN VARIOUS WAYS (Continued)

This function can be used to enjoy a motion or motionless picture.

DVD/SUPER-VCD/VCD

1. Press ZOOM when playing a DVD, the screen shows:

The picture is enlarged 1.5 times as big.

2. Press ZOOM again. the screen shows:

The picture is enlarged twice as big.

3. Press ZOOM again. the screen shows:

The picture is enlarged four times as

big.

4. Press , , , to move the enlarged picture.

5. To resume the picture, press ZOOM once more, then screen shows ÒZOOM OFFÓ.

ZOOM X1.5

ZOOM X2

ZOOM X4

ZOOM PLAY

The unit can memorize the last point where it stops and resume playback from there.

WHEN PLAYING CD

1. Press STOP to stop playing.

2. Press MEMORY to resume playback.

MEMORY

RESUME PLAY

Notes:

1. This function does not work for any programmed playback.

2. This function is removed when the disc is unloaded or the unit is off.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`31

RETURN

STEP

PROGRAM

A-TIME

SLOW

CHANNEL

A-B

ZOOM

VOLUME

MEMORY

Page 32

• 32 •

PLAY DISCS IN VARIOUS WAYS (Continued)

WHEN PLAYING SUPER-VCD, VCD, CD

1. After the unit stops, press PROGRAM to select.

The screen shows:

PROGRAM

PROGRAM P00:00

2. Press number buttons in order, according to the track to be programmed. Example: Press 2, 4, 6 , 8.

screen

Notes:

track number program order

* *:* *

PROGRAM P01:02

PROGRAM P04:08

. . .

You may program the tracks on a disc and play them in the programmed order.

RETURN

A-B

STEP

PROGRAM

ZOOM

SLOW

A-TIME

MEMORY

CHANNEL

VOLUME

PROGRAM PLAY (VCD, AUDIO CD only)

. . .

3. Press to start playing.

4. Press PROGRAM twice to remove program play.

PLAY

WHEN PLAYING SUPER-VCD, VCD

1. Press INTRO after the unit stops.

The screen shows:

2. Press number buttons to select a digest mode.

Press button 1 for intro mode.

The unit plays each scene for about 10 seconds.

3. Press button 2 for disc digest.

SET UP

DIGEST PLAY

(VCD, AUDIO CD only)

1. INTRO

2. DISC

3. TRACK

4. EXIT

INTRO

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`32

10+

0/10

INTRO

TITLE.PBC

V-MODE

PLAY

Page 33

• 33 •

If the scene number is more than 9, press to look at the next picture.

4. Press number buttons to select a track.

Press button 3 for scene digest.

Press to select a track.

PLAY DISCS IN VARIOUS WAYS (Continued)

SCENE01 SCENE02 SCENE03

SCENE08 SCENE09 SCENE04

SCENE07 SCENE06 SCENE05

The unit shows the starting picture of all the scene on the screen simultaneously.

The unit divides scene 3 into nine parts and shows the starting picture of each part on the screen.

5. Press button 4 to exit from digest play.

6. Remove digest play.

Press , digest play is removed and the unit stops.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`33

Page 34

• 34 •

PLAY DISCS IN VARIOUS WAYS (Continued)

WHEN PLAYING CD

1. Press INTRO after the unit stops.

The screen shows:

2. Press number buttons to select a digest mode.

Press button 1 for intro mode.

The unit plays the first 15 seconds of each track one after another.

Press , to play the first 15 seconds at the previous or next track.

3. Press button 4 to exit from digest play.

4. Remove digest play.

Press , digest play is removed and the unit stops.

Notes : CD only has ÒINTROÓ function.

1. INTRO

2. ----

3. ----

4. EXIT

INTRO

Load a karaoke disc and play it.

1. Set karaoke disc and play it.

2. Insert the microphone into MIC.

3. Turn knob ÒMIC LEVELÓ to obtain the needed degree.

4. Push number buttons to select tracks.

KEY CONTROL

You may change the pitch to adapt to your voice.

1. Push to raise the pitch.

Each time you push the button, the pitch is raised by one step. It can be raised by 7 steps at the most.

2.Push to lower the pitch.

Each time you push the button, the pitch is lowered by one step. It can be raised by 7 steps at the most.

PLAY KARAOKE

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`34

Page 35

• 35 •

FUNCTION SETTING

According to the recorded information and external equipment,set the following functions for DVD to obtain the best playing status.

1. Press

SETUP to set the main menu.

2. Press direction buttons ( , ) and press

to confirm.

Example: Set "DUAL MONO" in "DOLBY DIGITAL SETUP" to "L-MONO".

¥ Press direction button to select. The

screen shows:

The screen shows:

¥ Press to confirm and enter

"DOLBY DIGITAL SETUP ".

SET UP

V-MODE

TITLE.PBC

INTRO

0/10

10+

SETUP

The screen shows:

After entering the menu, the unit automatically selects a column.

Press the direction button to select "DUAL MONO".

The screen shows:

Press direction button , to select "L- MONO"

The screen shows:

Press to confirm.

SETUP MENU -- MAIN PAGE

GENERAL SETUP SPEAKER SETUP DOLBY DIGITAL SETUP DOLBY SURROUND SETUP PREFERENCES

EXIT SETUP

SETUP MENU -- MAIN PAGE

GENERAL SETUP SPEAKER SETUP DOLBY DIGITAL SETUP DOLBY SURROUND SETUP PREFERENCES

EXIT SETUP

DVD MENU SETTING

PLAY

-- DOLBY DIGITAL SETUP -OP MODE LINE OUT DUAL MONO DYNAMIC

MAIN PAGE

-- DOLBY DIGITAL SETUP -OP MODE DUAL MONO STEREO DYNAMIC L-MONO

R-MONO MIX-MONO

MAIN PAGE

-- DOLBY DIGITAL SETUP -OP MODE DUAL MONO STEREO DYNAMIC L-MONO

R-MONO MIX-MONO

MAIN PAGE

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`35

Page 36

• 36 •

FUNCTION SETTING (Continued)

3.Exit from menus. Using direction buttons go to Ò MAIN PAGEÓ menu, then press .

The screen shows.

To select ÒGENERAL SETUPÓ menu, press .

2. NORMAL / LB (LETTER BOX)

This is selected when the unit is connected with a normal TV. Widescreen images are shown on the screen, with black belt on the top and bottom.

The setting structure is as follows:

3. WIDE

This is selected when the unit is connected with a wide-screen TV.

TV DISPLAY >> NORMAL/PS

NORMAL/LB WIDE

TV TYPE >> AUTO

NTSC PAL

PIC MODE >> AUTO

HI-RES N-FLICKER

SCAN MODE >> P-YUV

P-RGB P-OFF

ANGLE MARK >> ON

OFF

OSD LANG >> ENGLISH

FRENCH SPANISH

AUDIO OUT >> ANALOG

SPDIF/RAW SPDIF/PCM

CAPTIONS >> ON

OFF

SCR SAVER >> ON

OFF

MAIN PAGE

TV DISPLAY

1. NORMAL/ PS (PAN SCAN) This is selected when the unit is connected with a normal TV. Wide-screen images are shown on the screen, but with some parts cut automatically.

SETUP MENU -- MAIN PAGE

GENERAL SETUP SPEAKER SETUP DOLBY DIGITAL SETUP DOLBY SURROUND SETUP PREFERENCES

EXIT SETUP

GENERAL SETUP

PLAY

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`36

Page 37

• 37 •

FUNCTION SETTING (Continued)

AUDIO OUT

¥ ANALOG: No signal is output from the

coaxial, optical port.

¥ SPDIF/RAW: Select this when the DVD

player is connected with a power amplifier through coaxial port, refer to page 18. When a Dolby Digital DVD, DTS DVD or MPEG DVD is played, the coaxial port will output in the corresponding digital(Source code) format. The power amplifier to be connected must have Dolby Digital, DTS and MPEG decoding.

¥ SPDIF/PCM: Select this when the DVD

player is connected with a 2-channel digital mode or stereo amplifier (refer to page 18 for the connection). When a Dolby Digital or MPEG DVD is played, the coaxial port will output in PCM 2-channel format.

CAPTIONS

CAPTION was invented for hearing impaired person. But it is very useful when learning foreign languages. If your TV supports closed caption, select ON. If not, closed caption wonÕt be displayed.

¥ ON : The hidden subtitle is shown.

¥ OFF : The hidden subtitle is turned off.

SCREEN SAVER

Start the screen saver, the screen saver image appears when the unit stops or the image is frozen for a few minutes. This saver can keep the screen from being damaged.

¥ ON: Start the screen saver.

¥ OFF: Remove the screen saver.

TV TYPE

You may select according to the colour system of the TV to be connected.

Select "AUTO" for a multi-system TV.

Select "NTSC" for a NTSC TV.

Select "PAL" for a PAL TV.

PIC MODE

Select "AUTO" for automatically setup.

Select "HI-RES" for high-resolution picture.

Select "N-FLICKER" for no flicker picture.

SCAN MODE

Select "P-YUV" for connecting Component output.

Select "P-RGB" for connecting VGA output.

Select "P-OFF" for connecting VIDEO output.

ANGLE MARK

This only works when there is an angle mark on the disc. ¥

Select "ON",the screen shows the mark when playing a DVD.

Select "OFF",the mark is not shown.

OSD LANGUAGE

¥ ENGLISH

The OSD is in English.

¥ FRENCH

The OSD is in French.

¥ SPANISH

The OSD is in Spanish.

Notes:

In case of selecting SPDIF/RAW or SPDIF/PCM, no signal is output from the audio analog output.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`37

Page 38

• 38 •

FUNCTION SETTING (Continued)

The setting structure is as follows :

- -SPEAKER SETUP PAGE - -

SPEAKER SETUP

DOWNMIX >> LT/RT

>> STEREO >> VSS >> OFF

CENTER >> ON

>> OFF

REAR >> ON

>> OFF

SUBWOOFER >> ON

>> OFF

CNTR DELAY >> 5MS

>> 3MS >> 1MS >> OFF

REAR DELAY >> 15MS

>> 9MS >> 3MS >> OFF

TEST TONE >> ON

>> OFF

DOWNMIX (Dolby Digital DVD disc only)

DOWNMIX is used to reproduce the proper analog audio when the audio channel recorded on the disc differs from the output audio channel configuration. Assume that 5.1 channels audio are recorded on the disc but you can receive only stereo audio channels. In this case downmix is unavoidable and you will hear all the channels recorded on disc. If you are using Dolby Surround Pro Logic decoder, please set the downmix mode to LT/RT. And the last sub item stereo makes the downmixing operation stops. This means that you are using the full 5.1 channel audio system. If you donÕt have an amplifier, which have Dolby Digital, dts decoder or 5.1 channel analog audio input, do not select this stereo sub item. If you do that you may hear the front stereo sound only. Select this stereo sub item when you are going to use the full

5.1 channel analog audio with your amplifier.

CENTER

This submenu is valid when you are using an amplifier, which have the 5.1 channel analog audio input. If you have the center speaker, please turn the sub item ON. If not, turn OFF. If you are going to adjust the center delay, please turn the sub item ON. If not, you canÕt adjust the center delay.

REAR

This submenu is valid when you are using an amplifier, which have the 5.1 channel analog audio input. If you have the rear speaker, please turn the sub item ON. If not, turn OFF. If you are going to adjust the rear delay, please turn the sub item ON. If not, you canÕt adjust the rear delay.

SUBWOOFER

This submenu is valid when you are using an amplifier, which have the 5.1 channel analog audio input. If you have the subwoofer speaker, please turn the sub item ON. If not, turn OFF.

CNTR DELAY

You can adjust the sound in home by adding delay time to the center speaker. See REAR DELAY for more information.

Notes:

If you want to select CENTER, REAR SUBWOOFER, CNTR DELAY, REAR DELAY and TEST TONE, Downmix should be set to the ÒOFFÓ.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`38

Page 39

• 39 •

FUNCTION SETTING (Continued)

OP MODE >> LINE OUT DUAL MONO >> STEREO

L-MONO R-MONO MIX-MONO

DYNAMIC >> FULL

6/8 4/8 2/8 OFF

MAIN PAGE

OP MODE (output MODE)

¥ LINE OUT: Compress input signals

linearly.

DUAL MONO

There is the output mode of the L and R signals of the set audio output. If it is set to "MIX-MONO", the function only works when the DVD being played is

5.1-channel.

DYNAMIC

When the compression mode is set to "LINE OUT", this is selected to adjust linear compression rate to obtain the different compression results of the signals.

The setting structure is :

- -DOLBY DIGITAL SETUP PAGE - -

DOLBY DIGITAL SETUPSPEAKER SETUP

REAR DELAY

Like CNTR DELAY, you can adjust the sound in home by adding delay time to the rear speaker. You may hear the best quality sound if the distance between speakers is same when playing 5.1 channel surround sounds. But the displacement of speakers with same distance is very difficult in real. Please refer the following figure and table, set the appropriate delay time.

Df-Dc(cm) Value(ms)

Df<=Dc OFF

34 1

68 2

102 3

136 4

170 5

Center

Speaker

Delay

Df-Ds(cm) Value(ms)

Df<=Ds OFF

102 3

204 6

306 9

408 12

510 15

Rear

Speaker

Delay

Ideal Front Speaker

Ideal Surround Speaker

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`39

Page 40

• 40 •

FUNCTION SETTING (Continued)

AUDIO >> ENGLISH

FRENCH SPANISH KOREAN PORTUGUESE JAPANESE

SUBTITLE >> ENGLISH

FRENCH SPANISH KOREAN PORTUGUESE JAPANESE OFF

DISC MENU >> ENGLISH

FRENCH SPANISH KOREAN PORTUGUESE JAPANESE

PARENTAL >> 1. G

3. PG

4. PG 13

6. PG-R

7. NC-17

8. ADULT NO PARENTAL

PASSWORD >> CHANGE

>> OLD PASSWORD

NEW PASSWORD CONFIRM PWD

DEFAULTS >> RESET

MAIN PAGE

The setting structure is :

PREFERENCES

Notes:

To enter into the preference setting mode during the play, press the STOP button twice.

The setting structure is :

- -DOLBY SURROUND SETUP- -

DOLBY SURROUND SETUP

ON/OFF >> OFF

ON AUTO

SURROUND

If you are using Dolby surround decoder, please set the surround mode to ON.

And the other item OFF makes the Dolby surround operation stops.

This means that you are using the 2 channel audio system.

If you want to automatically setup, select last sub item AUTO.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`40

Page 41

• 41 •

FUNCTION SETTING (Continued)

DEFAULTS >> RESET

Each function setting returns to the initial status in the factory if you select this.

SELECT LANGUAGE

If a language mentioned above is recorded on the disc, you can select audio, subtitle or disc menu languages. If not, the language recorded on the disc is shown.

- -PASSWORD SETUP - -

PASSWORD >>CHANGE>> OLD PASSWORD

NEW PASSWORD CONFIRM PWD

Select this to adapt the code, the screen shows:

Enter a password according to the screen.

PASSWORD CHANGE PAGE

OLD PASSWORD

NEW PASSWORD

CONFIRM PWD

Notes:

The password is 3308 when the unit is turned on initially or you forget the password.

PASSWORD

PARENTAL

The content of a disc with lock function is evaluated by grades.

You may select an age control grade as you need.

Example: Select "G", the scenes of

violence inadvisable are not played to children.

For adults, the screen suggests you enter the code after pressing , you can watch if the password is right.

Notes: The password is set by yourself

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`41

PLAY

Page 42

• 42 •

TROUBLESHOOTING

If you experience the following problems while using the unit, this troubleshooting guide can help you.

No sound

Check if you press the MUTE.

Check if the unit is properly connected.

Make sure you operate the TV or amplifier correctly.

Make sure the DVD player or the amplifier position is properly selected .

Make sure the audio output is set properly . (Check the audio output mode of the general setup in Setup menu)

Check whether the disc plays in slow or fast forward (or reverse) mode.

No image

Check if the unit is properly connected.

Make sure you operate the TV correctly.

Make sure you set the colour system correctly.

Bad sound quality

Make sure the audio output mode is set correctly.

Make sure the audio connection between the unit and amplifier is right.

Check whether the disc is dirty or damaged.

Image rolls and no colour

The colour system set by this unit does not match with that of TV. Press P/N on the remote control to select the correct one.

Check whether the disc is dirty or

damaged.

Disc can not be played

There is no disc in the unit.

Insert the disc on the disc tray properly with the label side up.

Clean the disc.

Moisture has condensed in the unit. Remove the disc and leave the unit on for about one hour.

Make sure that the area code of disc is 1 or All. (In case of DVD, it may not play the disk which come from abroad.)

Remote control does not work

Remove barriers between the remote control and the unit.

Point the remote control at the remote control sensor of the unit.

Replace the batteries with new ones.

Reference page 11.

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`42

Page 43

• 43 •

TECHNICAL SPECIFICATIONS

Laser

Television signal

Frequency response

Audio Signal/noise ratio

output level : 2.0±0.2Vrms

(Load impedance : 10K½)

output level : 0.5±0.1Vp-p

(Load impedance : 75½)

output level : 1.0±0.2Vp-p

(Load impedance : 75½, imbalance, negative polarity)

output level : brightness (Luma) 1.0±0.2Vp-p

chromaticity (Clor) 0.286±20% (Load impedance : 75½)

AC100~240V, 50/60Hz

<25W

About 3.5Kg

wavelength 650nm

NTSC /PAL/AUTO

20Hz ~ 20KHz

90dB (At 1KHz, JIS A-Weighted)

² - 60dB (At 1KHz, 0dB)

90dB (1KHz)

85dB (1KHz)

Audio distortion + noise

Channel separation

Dynamic range

Output

Audio

Output

Video

Analog

Digital

Composite

S-video

Power supply

Power consumption

Dimensions (WxHxD)

NET Weight

430 x 88 x270 mm

Notes : Design and specifications in this ownerÕs manual are subjected to change without prior notice to improve quality and function.

Component

0.7Vp-p (Load impedance : 75½)

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`43

Page 44

• 44 •

Regional restriction codes are built in this DVD player model and all DVD discs for

each sales region throughout the world. If regional code of this DVD player does not

match with regional code of DVD disc that you want to playback, if wonÕt work. The

regional code number can be found the diagram below .

reREGIONAL RESTRICTION CODE

DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘`44

Page 45

OWNER’S MANUAL

DVG-9000N

DVG-9000N(GB)_DECI 01.9.11 2:47 PM ˘`45

Page 46

Warranty

Daewoo Electronics Canada Inc. (DECI) warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the Company’s option) in exchange for any part of any unit of its manufacture which under normal installation, use and service disclosed such defect, provided the unit is delivered by the owner to us or to our authorized distributor from whom purchased or authorized service station intact, for our examination with all transportation charges prepaid to our factory. To establish and receive warranty service at our factory or authorized service facilities, proof of puchase/dated sales invoice is required. Written authorization must be obtained before any merchandise is returned to the factory.

This warranty does not extend to any of our electronic products which have been subjected to misuse, neglect, accident, incorrect wiring not our own, improper installation, unauthorized modification, or used in violation of instructions furnished by us, nor units which have been repaired or altered outside of our factory, nor to cases where the serial number thereof has been removed, defaced or changed.

This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to assume for us any other liability in connection with the sale of our electronic products.

Over-the-counter exchange of initially defective units

A unit is described as initially defective when the dealer opens the unit and finds that it is inoperative or a customer opening a new unit finds that it is initially defective. This unit may be returned to the factory by the dealer for exchange. Under no circumstances will a customer be permitted to return an initially defective unit directly to the factory.

Model Parts Labor

DVG-9000N 1 Year 3 months

This instrument is listed by Underwriter’s Laboratories, Inc. It is designed and manufactured to meet rigid U.L. & C-UL. safety standards against X-radiation, fire, casualty and electrical hazards.

Daewoo Electronics Canada Inc.

3650 Victoria Park Ave. Suit 202 Northyork, Ontario.

M2H 3P7 Telephone Nr. : 416 - 756 - 0700

DVG-9000N(GB)_DECI 01.9.11 2:47 PM ˘`46

Daewoo DVG-9000N User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual