Daewoo DTC-14Q1T, DTC-20Q1, DTC-20Q1T, DTC-21Q1, DTC-21Q1T User's Guide
...
MODEL NO.
DTC-14Q1/14Q1T/20Q1/20Q1T/21Q1/21Q1T
14Q2/14Q2T/20Q2/20Q2T/21Q2/21Q2T
14Q3/14Q3T/20Q3/20Q3T/21Q4/21Q4T
14Q6/14Q6T/21Q8/21Q8T
14T1/14T1T/20T1/20T1T/21T1/21T1T
14T2/14T2T/20T2/20T2T/21T2/21T2T
14T3/14T3T/20T3/20T3T/21T5/21T5T/21T9/21T9T
Instruction
Manual
Instruction
Manual
1
IDENTITY OF FEATURES ON LOCALAND REMOTE CONTROL
LOCAL CONTROL
REMOTE CONTROL
PR
MENU
VIDEO AUDIO
MAIN
POWER
BUTTON
VIDEO
INPUT
AUDIO
INPUT
HEAD
PHONE
STAND-BY
INDICATOR
REMOTE
SENSOR
AV & MENU
BUTTON
VOLUME
DOWN/UP
BUTTONS
PROGRAMME
DOWN/UP
BUTTONS
Front
PR
OK
PR
SLEEP RECALL
SKIPMOVEDEL
TIME MODE
NORMAL
MENU
123
456
7809
1
2
3
5
6
7
8
9
4
10
11
13
14
16
18
17
15
12
TELETEXT mode
1
POWER
2
NUMBER 0-9
3
MENU
4
TEXT MIX
5
PAGE UP
6
SUBPAGE
7
INDEX
8
PAGE DOWN
9
HOLD
A
MUTE
B
HALF TONE(MESH)
C
SIZE
D
CANCEL
E
G (VOLUME UP)
F
R (VOLUME DOWN)
G
TV/TEXT
H
C (BRIGHT UP)
I
Y (BRIGHTDOWN)
TV mode
1
POWER
2
NUMBER 0-9
3
MENU
4
AV
5
PR (CURSOR)UP
6
VOLUME UP (CURSOR RIGHT)
7
OK(NORMAL)
8
PR(CURSOR) DOWN
9
VOLUME DOWN(CURSOR LEFT)
A
MUTE
B
RECALL
C
SLEEP
D
SKIP
E
MOVE
F
DELETE
G
TELETEXT
H
MODE
I
TIME
2
CONTENTS
* Identity of features on Local and Remote Control 1
* Important safeguards 2
* Installation 3
After moving the set 3
Inserting Batteries into the Remote Control Unit 3
Aerial connection 3
Mains connection 3
Switching the set on and off 3
Tuning the TV Channels 4
Edit 4
Manual Channel Setting 5
* Daily use 6
Selecting a Programme Number 6
Volume and Picture control 6
Timer 6
Sleep 7
Recall 7
Child Lock 7
Mode 7
OSD half tone (mesh) function 7
16:9 function 7
Local control key Mode 8
*Connecting the External Equipment 8
*TELETEXT 8
IMPORT ANT SAFEGUARDS
Water / Moisture: Never install the set in the following places: in the bathroom, in a wet base-
ment.
Do not place any containers with liquid (e.g. flower vases) on the set.
Heat: Never place the set near heat sources (e.g. radiator).
Ventilation: Do not cover the ventilation openings in the cabinet.
Never place the set in a confined space such as a bookcase or built-in cabinet, unless proper ventilation is provided.
Object Entry: Do not insert foreign objects, such as needles and coins, into the ventila-
tion openings.
Lightning Striking: You should disconnect your set from the mains and the aerial system dur-
ing thunderstorms.
Cleaning: Unplug the set from the mains before cleaning.
3
INST ALLATION
AFTER MOVING THE SET
If the used set is moved or placed in a different direction, the
MAIN POWER button must be switched off for at least 15 minutes in order to take out a colour strain on the screen.
INSERTING BA TTERIES INT O THE REMOTE CONTROLUNIT
Press down the battery compartment grip and slide the
cover.Insert the batteries supplied(two 1.5V, type AA).
Make sure that the polarity matches with the (+) and (-) marks
inside of the battery compartment.
Used batteries should be disposed of properly.
AERIAL CONNECTION
For better picture and sound quality, an effective aerial installation is the most important.
If you are located in a relatively strong area, you will be able to
use the indoor aerial.
When using an outdoor aerial, it is usually connected to the set
by means of 75 ohm coaxial cable.
MAINS CONNECTION
Plug the mains cable into the power socket with
100~250V ,50/60Hz AC.
SWITCHING THE SET ON AND OFF
Switching On
Switch the set on with the MAIN POWER button in front of the
receiver. The set will turn on.
If not, press either : - PR UP or DOWN button on the front of
set - or POWER button or the UP/DOWN button or one of the
NUMBER button 0..9 on the remote controller.
The STAND-BY INDICATOR will flicker during 5 times, after
then turn it off and a picture will appear on the screen.
Switching Off
Press POWER button on the remote controller to return the set
to its stand-by mode.
The STAND-BYINDICATOR will illuminate.
If you don't use the set for extended period of time, turn it off
with MAIN POWER button
in front of the receiver.
Loading...