Dacor OBAD20, OBAD36 User Manual

Installation Instructions

Overall Width OBAD20 - 19 1/2" (495mm)

OBAD36 - 35 7/8" (911mm)
Overall Height 21" (533mm)
Overall Depth 1/4" (6mm) deep return on frame edge
Cutout Width OBAD20 - 16 3/4" (425mm)

OBAD36 - 33 1/8" (841mm)
Cutout Height 18 3/4" (476mm)
Cutout Depth 3" (76mm) Minimum

SPECIFICATIONS MEASUREMENTS

Outdoor Grill Accessory Doors

nOteS:

Remove the door from the mounting frame prior to installing the frame. Install the front frame
utilizing the return flange mounting holes located on the left and right side of the frame. After the
frame is in place, level, plumb and install the door. Check for correct latch alignment.

Front View

(OBAD36 shown)

Rear View

(OBAD36 shown)

Front View

(OBAD20 shown)

Rear View

(OBAD20 shown)

Dacor ● 1440 Bridge Gate Drive, Diamond Bar, CA 91765 ● Tel: [phone] ● FAX: [phone] ● www.Dacor.com

Part No. 102547 Rev. A