EW, EWO, MW, MWO, PW, & PWO
1 1/2" (38mm)
Typical counter top
120VAC
Electrical
receptacle
5/8" (16mm) Min.
9 1/8" (232mm)
“A”
“B”
36"
(914mm)
2 1/2”
(64mm)
to Finished
Countertop
Warming Oven
2
1
3 7/16"
(87mm)
EW
3 1/4"
(83mm)
PW
2 1/4"
(51mm)
MW
1"
(25mm)
1 5/32"
(29mm)
1 1/8"
(29mm)
3 5/16"
(84mm)
1"
(25mm)
EWO
1"
(25mm)
1 5/16"
(33mm)
MWO
1"
(25mm)
2 3/16"
(56mm)
PWO
Warming Ovens
24”, 27”, 30”, 36” Wide,
Warming Ovens
CUTOUT DIMENSIONS
PLANNING
1/2091605
GUIDE
Models
Web: http://www.dacor.com
Corporate Phone: 800-793-0093
Dedicated Circuit
Required
24”
27” 73 lbs.
30” 76 lbs.
36” 0.8kW (6.5A) 90 lbs.
120VAC, 60Hz,
15A
(Breaker)
Models “A” Cabinet Cutout Width “B” Min. Cabinet Width
24” 22 1/2” (572mm) 24 1/4” (616mm)
27”
30” 30 1/4” (768mm)
36” 34 3/8” (873mm) 36 1/4” (921mm)
Total Connected
0.5kW (4A)
Load
Shipping Weight
HANDLE DIMENSIONS
Approximate
70 lbs.
25 1/2” (648mm)
NOTES:
1. 24” (610mm) minimum cabinet depth.
2. 3/4” (19mm) support platform (flush with cutout).
3. 1/8” (3mm) minimum clearance from appliance to
adjacent cabinet doors/drawers.
4. See the Combination Installation (CI) Section if
installing with a wall oven, microwave, or cooktop.
5. For stacked warming ovens, see CI.20.
27 1/4” (692mm)
Specifications are subject to change without notice.
See installation instructions for additional details.
2.1
L65333 rev D
EW, EWO, MW, MWO, PW, & PWO
23 3/16"
(589mm)
Chassis
Drawer open
5/64"
(2mm)
23 13/16”
(605mm)
"D"
"C"
"E"
10"
(254mm)
23 3/16"
(589mm)
9"
(229mm)
1/2"
(13mm)
1/2"
(13mm)
"D"
"E"
Mounting
holes
48" (1219mm)
3 prong
120v power cord
Warming Ovens
24”, 27”, 30”, 36” Wide,
Warming Ovens
PLANNING
2/2072905
GUIDE
TOP VIEW
OVERALL DRAWER DIMENSIONS
(View with Drawer Removed)
Models “C” Drawer Face Width “D” Chassis Face Width “E” Chassis Width Oven Overlays
24” 23 15/16” (608mm) 23 5/8” (600mm) 22 3/16” (564mm)
27” 26 15/16” (684mm) 26 5/8” (676mm)
30” 29 15/16” (760mm) 29 5/8” (752mm)
36” 35 15/16” (913mm) 35 11/16” (906mm) 34 1/4” (870mm)
Web: http://www.dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
OVERALL CHASSIS DIMENSIONS
(Chassis View Without Drawer)
25 3/16” (640mm)
3/4” (19mm) Each Side;
1/2” (13mm) Top;
1/2” (13mm) Bottom
2.2
L65333 rev C