Dacor MRWD, MWDH, PWD, MWDV, IWD User Manual
EWD, IWD, MWDV, MWDH, MRWD, PWD
Warming Drawer
Cooktop
1 1/2" (38 mm)
Typical counter top
3/4” Min.*
(19 mm)
120 Vac
electrical
receptacle
A
36" Typ.
(914 mm)
B
C
A
Warming Drawer
Warming Drawer
B
3/4" Min.*
(19 mm)
D
3/4" Min.*
(19 mm)
120 Vac
electrical
receptacle
36" Typ.
(914 mm)
C
C
27"/30"/36"
Dacor
single oven
Warming Drawer
Warming Drawer
Toe Kick
D
C
D
C
120 Vac
Elect.
120 Vac
Elect.
A
3/4" Min.*
(19 mm)
Warming Drawers
Revised
06/03/08
24”, 27”, 30”, 36” Wide,
Warming Drawers
PLANNING
1/2
GUIDE
Model “A” Cutout Width
IWD24
EWD24
22 1/2” (572mm)
EWD27
IWD27
MWDH27
MWDV27
25 1/2” (648mm)
MRWD27
PWD27
EWD30
IWD30
MWDH30
MWDV30
MRWD30
PWD30
EWD36 34 1/4” (870mm)
* EWD36 cannot be stacked. Bare minimum spacing shown allows extra space to avoid scrapping and allow for
ventilation. On IWD series models, additional space may be required if an oversized drawer front is used. Use the
drawer face dimensions for the corresponding EWD series model for reference.
28 1/2” (724mm)
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
“B” Min. Width to Adjacent
CUTOUT DEPTH: 24” MIN. (610mm)
Doors/Drawers
24 1/4”*
(616mm)
27 1/4”*
(692mm)
30 1/4”*
(768mm)
36 1/4”
(921mm)
CUTOUTS DIMENSIONS
Specifications are subject to change without notice.
See installation instructions for additional details.
“C” Cutout Height
9 1/8” (232mm)
“D” Min. Vertical Gap
Between Cutouts
1 1/16”*
(27mm)
2.8
23 3/8"
(594 mm)
Chassis
Drawer open
5/64"
(2mm)
23 13/16
(605 mm)
B
C
10 1/8"
(257 mm)
A
1"
(25mm)
1 5/16"
(33mm)
MWO
1"
(25mm)
2 3/16"
(56mm)
PWO
3 7/16"
(87mm)
EW
3 1/4"
(83mm)
PW
2 1/4"
(57mm)
MW
1"
(25mm)
1 5/32"
(29mm)
1 1/8"
(29mm)
3 7/16"
(87 mm)
EWD
3 1/4"
(83 mm)
MRWD
MWDH/V
1"
(25mm)
1"
(25mm)
PWD
2 1/4"
(57 mm)
1"
(25mm)
1"
(25mm)
10"
(254 mm)
9"
(229 mm)
1/2"
(13 mm)
1/2"
(13 mm)
Chassis without
drawer inserted
Mounting
Hole 9 Places
40" (1016 mm)
3 prong
120 Vac power cord
EWD, IWD, MRWD, MWDV, MWDH, PWD
Warming Drawers
Revised
06/03/08
HANDLE DIMENSIONS
24”, 27”, 30”, 36” Wide,
Warming Drawers
DRAWER FACE DIMENSIONS
PLANNING
2/2
(MW SERIES SHOWN)
GUIDE
OVERALL DIMENSIONS
TOP VIEW
(EWD SERIES SHOWN)
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
CHASSIS DIMENSIONS
Model “A” Drawer Face Width “B” Chassis Face Width “C” Chassis Width
EWD24 24” (610mm) 23 5/8” (600mm) 22 1/4” (565mm)
EWD27
MRWD27
MWDH27
MWDV27
PWD27
EWD30
27” (686mm) 26 5/8” (676mm) 25 1/4” (641mm)
MRWD30
MWDH30
MWDV30
30” (762mm) 29 5/8” (752mm) 28 1/4” (718mm)
PWD30
EWD36 36” (914mm) 35 5/8” (905mm) 34 1/4” (870mm)
WARMING DRAWER OVERALL DIMENSIONS
Specifications are subject to change without notice.
See installation instructions for additional details.
2.9
Loading...