Dacor MRV3615S Installation manual

Installation Instructions

Downdraft Vent

HRV46, MRV3015*, MRV3615*, MRV48, MRV3015-ER, MRV36-ER, MRV48-ER

Includes installation instructions for Dacor cabinet blower CABP3, which is an option for the indicated* models.

Part No. 113910 Rev E

Use these downdraft vents only with approved Dacor® appliances. See the instructions in this manual to determine suitability with the companion appliance.

Table of Contents

Important Safety Instructions .......................................... 1

Safety Symbols and Labels

General Safety Precautions ............................................. 2

Product Specifications ..................................................... 2

Electrical Specifications ................................................... 2

Dimensions: MRV3015, MRV3615....................................3

Dimensions: HRV46, MRV48............................................4

Dimensions: MRV3015-ER, MRV36-ER, MRV48-ER......5

............................................. 1

Installation Specifications ................................................ 6

Planning the Installation ................................................... 6

Planning the Duct Work

Installation Instructions .................................................. 12

Installation Preparation .................................................. 12

Installing the Downdraft Vent in the Cutout ................... 13

Verifying Proper Operation Installation Checklist

Wiring Diagram: All Models ............................................ 17

CABP3 Cabinet Blower Ratings ..................................... 17

................................................... 8

............................................. 16

...................................................... 16

Before You Begin...

• Installer: In the interest of safety and to minimize problems, read these installation instructions completely and carefully before you begin the installation process. Leave these installation instructions with the customer.

• Customer: Keep these installation instructions for future reference and the local electrical inspector’s use.

Customer Assurance Information

If You Need Help...

For installation or warranty questions/issues, contact Dacor Customer Assurance. Have available the vent’s model and serial numbers, which are on the data label on the front of the unit. This label includes power-supply requirements.

Dacor Customer Assurance: Phone: 833-35-ELITE (833-353-5483) USA, Canada; Mon - Fri 5:00 a.m. to 5:00 p.m. Pacific Time; Website: www.dacor.com/customer-care/contact-us

Model Identification

Use HRV, and MRV downdraft vents with approved Dacor cooktops and ranges only.

Model Number Description

HRV46 46” wide downdraft vent; HRV-style top cap

MRV3015

MRV3015-ER 30” wide downdraft vent; MRV-style top cap

MRV3615

MRV36-ER

MRV48

MRV48-ER

30” wide downdraft vent; MRV-style top cap

36” wide downdraft vent; MRV-style top cap

48” wide downdraft vent; MRV-style top cap

All specifications subject to change without notice. Dacor assumes no liability for such changes.

Important Safety Instructions

Important Information About Safety Instructions

• The Important Safety Instructions and warnings in this manual do not cover all possible issues. Use common sense and caution when installing, maintaining, or operating the appliance.

• Contact Dacor Customer Assurance about issues and conditions you cannot resolve. (See Customer

Assurance Information.)

DANGER

Do not store/use combustible, flammable substances (e.g., gasoline, alcohol, benzene) in/on/near the vent.

WARNING

TO REDUCE RISK OF PROPERTY DAMAGE AND PERSONAL INJURY, OBSERVE THE FOLLOWING:

a) Installation work and electrical wiring must be done by

qualified person(s) per applicable codes, including fire-rated construction.

b) Sufficient air is needed for proper combustion and

exhaust of gases via the flue of fuel-burning equipment to prevent backdraft. Follow manufacturer guidelines such as are published by the National Fire Protection Association (NFPA); the American Society for Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE); and local code authorities.

c) Know the location of wiring and piping before cutting

or drilling into a wall or ceiling.

d) Fans must always vent to the outdoors.

Safety Symbols and Labels

DANGER

Immediate hazards that WILL result in severe personal injury or death.

WARNING

Hazards or unsafe practices that COULD result in severe personal injury or death.

CAUTION

Hazards or unsafe practices that COULD result in minor personal injury or property damage.

WARNING

The unit has a 3-prong grounding plug to protect against electric shock. It must plug into a dedicated, 3-prong, grounded outlet. The owner shall ensure that such an outlet is available for the appliance. Do not:

• remove the third (ground) prong from the power cord.

• use an adapter plug.

• use an extension cord.

• use a damaged power cord.

• Use a ground fault interrupter (GFI).

READ AND SAVE THESE INSTRUCTIONS

Important Safety Instructions

General Safety Precautions

To reduce risk of fire, electric shock, serious injury, or death when using the vent, follow basic safety precautions, including:

WARNING

• Do not install a damaged appliance. If you receive a damaged appliance, contact your dealer or builder.

• Observe all governing ordinances during planning and installation. Contact the local building department for details.

• The electrical outlet for the downdraft vent should be installed by a licensed electrician.

• Do not vent hazardous or explosive materials and vapors through the unit.

• Use this downdraft vent only as outlined in the User Manual. The vent is not designed for commercial use.

• The owner should install/repair/replace partts only as specified in the product literature. A qualified technician should perform all other service. Contact Dacor Customer Assurance for examination, repair, or adjustment.

• Keep all packaging away from children.

• For proper operation, install the unit with a cabinet, in-line, or remote blower. Use only a specified model.

Product Specifications

WARNING

• Ensure the vent is unplugged for installation/service.

• The installer must show the customer the outlet so the owner can unplug the vent as needed.

• Install the vent as instructed in this manual, the Dacor range/ cooktop installation instructions, and the blower installation instructions.

• Read the User Manual completely before operating the vent.

• Do not tamper with the vent controls.

• Do not let the filters or vent openings become blocked. Do not let foreign objects be sucked into vent holes.

• Clean the filters and all grease-laden surfaces often to prevent grease fires and maintain performance. Clean the appliance only as specified in the User Manual.

• Do not leave children/pets unattended near the operating range/cooktop.

• Do not let children play with the downdraft vent.

Electrical Specifications

The downdraft vent comes with a 28” (71.1 cm) power cord with a 3-prong plug. Plug it directly into a 3-prong outlet meeting the requirements below.

The correct voltage, frequency and amperage must be supplied as specified below. The circuit must be protected by a properly sized circuit breaker or time-delay fuse.

Electrical-Supply Requirements

A 3-prong outlet connected to a 120 Vac, 60 Hz, 15 Amp. grounded, dedicated, single-phase circuit is required.

• The above specifications are for reference only. If they conflict with spec’s on the product data label, use the spec’s on the label.

• The customer must supply 3 conductor wiring/conduit with minimum 8-Amp current-carrying capacity to supply power to the blower from the downdraft vent. (See Installation Specifications for details.)

• The owner shall ensure the electrical outlet is installed by a licensed electrician. The electrical installation must comply with local ordinances and the latest revision of the National Electric Code ANSI/NFPA 70 (latest revision), a copy of which may be obtained from:

National Fire Protection Association 1 Batterymarch Park Quincy, Massachusetts 02269-9101

• The electrical outlet situated so the vent can be unplugged for service without removing appliances from the cabinet.

Product Specifications

Product Dimensions: MRV3015, MRV3615

2 3/16”

(5.6 cm)

”

5/16” (8 mm) thick stiffener

across back

3”

(7.6 cm)

”

1 15/16 (4.9 cm)

2 1/8

(5.4 cm)

3/16”

(5 mm)

2 9/16”

(6.5 cm)

Vent shown

in raised

position

Top cap with

vent down

9/16”

(1.4 cm)

15"

(38.1 cm)

INSTALLER: To ensure the cooking unit performs properly, seal all seams around the motor cover where it contacts the vent chassis with aluminum tape. (See the graphic below for motor cover location.)

Tolerances: ±1/16” (±1.6 mm) unless otherwise stated

Model

A - Top-Cap Width B - Chassis Width

30” (76.2 cm) 27 3/8” (69.5 cm)MRV3015

36” (91.4 cm) 33 3/8” (84.8 cm)MRV3615

IMPORTANT

3/8"

(1.0 cm)

2 1/8" (5.4 cm)

MRV top cap (side view)

See pages 9 and 10 for exhaust locations and dimensions.

20”

(50.8 cm)

3 3/4”

(9.5 cm)

1 1/8” (2.9 cm)

30 1/4”

(76.8 cm)

37 1/4”

(94.6 cm)

(76.2 cm)

30"

Front of unit

Adjustable

anchor legs

Vent chassis

6”

(15.2 cm)

Motor cover

Aluminum tape

Product

data label

28" 3 prong

grounded

power cord

Motor cover

* Total chassis depth with optional CABP3 blower installed is 10 3/8” (26.3 cm).

** Maximum height of downdraft vent must not exceed maximum specified counter height for cooking appliance. See installation instructions for cooking appliance.

Product Specifications

Product Dimensions: HRV46, MRV48

Tolerances: ±1/16” (±1.6 mm) unless otherwise stated

5/16” (8 mm)

thick stiffener

across back

2 1/2"

(6.4 cm)

1 15/16" (4.9 cm)

18 5/8”

(47.3 cm)

3 3/4"

(9.5 cm)

1" (2.5 cm)

2 3/16"

(5.6 cm)

2 1/8"

(5.4 cm)

3/16"

(5 mm)

2 9/16"

(6.5 cm)

Vent shown

in raised

position

(76.8 cm)

(94.6 cm)

30 1/4"

37 1/4"

9/16"

(1.4 cm)

(25.4 cm)

(76.2 cm)

Top cap with

vent down

10"

30"

Model No.

A - Top-Cap Width B - Chassis Width

MRV48 48” (121.9 cm) 43 3/8” (110.2 cm)

HRV46

INSTALLER: To ensure the cooking unit performs properly, seal all seams around the motor cover where it contacts the vent chassis with aluminum tape. (See the graphic below for motor cover location.)

46” (116.8 cm) 43 3/8” (110.2 cm)

IMPORTANT

See Pg. 9 for exhaust locations/dimensions.

*Max height of downdraft must not exceed cooking

’s max. specified counter

unit

height. (See cooking unit’s installation instructions.)

(15.2 cm)

Motor cover

Front of unit

Product

data label

28" 3-prong

grounded

power cord

Aluminum tape

Motor cover

Adjustable

anchor legs

Vent chassis

3/8"

(1.0 cm)

2 1/8" (5.4 cm)

HRV, MRV top cap (side view)

+ 14 hidden pages