It is important to observe the specified dimensions of the installation cutout for a
trouble-free installation of the appliance and for the subsequent appearance of the door
panel.
- In particular ensure that the cutout is square. Squareness can be checked by suitable
means, spirit level diagonal measurements, etc.
- This side walls of the cutout must be flush. The minimum thickness of the side and top
walls is 5/8” (16 mm).
2. Plan the cutout : Single
Call Out 18”24”30”36”42”
A (Cabinet Width)
B (Cabinet Depth)
• B : Includes the standard door panel thickness with 3/4”.
• Installation inside a cabinet of this width allows the refrigerator trim to be attached
directly to the surrounding cabinets.
Min 25” (635 mm)
84” (2134 mm)
9
DACOR built-in refrigeration appliances are designed to accommodate nearly any type
of kitchen cabinetry door installation. Generally, when using standard ¾”(19mm)panels,
Min 25”(635mm) deep cutout are recommended.
2. Plan the cutout : Single
* Furniture Return
Back wall
84”
(2134mm)
25”
(635mm)
Furniture Return
Min. 4inch
(102mm)
Face Cabinet
Min 4”
(102mm)
Back wall
25”
(635mm)
10
Furniture Return
Furniture return must be at least 4" (102 mm) deep, on interior top and sides,
of solid material and should be finished to match the exterior at the same depth (4" or 102 mm)
3. Plan the configuration & cutout : Pair / 3 unit
1) Recommend configuration
OK OK X
Column Column Column
Single
* Without Partition
3. Plan the configuration & cutout : Pair / 3
Pair
OK
Column Column
X ( not possible pairing ) X ( not possible pairing )
Column Column
X ( not possible pairing )
X ( not possible pairing )
Column Column
Column FDR or T
unit
FDR or T FDR or T
11
3. Plan the configuration & cutout : Pair / 3 unit
1) Recommend configuration
* With Partition
Door swivel direction : Opposite
The minimum thickness of the partition is 1 1/4” (32mm).
OK
Column Column
3. Plan the configuration & cutout : Pair / 3
Pair
Screw
Door swivel direction : Same
The minimum thickness of the partition is 1 9/16” (40mm).
OK
Column Column
OK
FDR or T
Column Column
Column
OK
Screw
unit
Column
OK
FDR or T
12
3. Plan the configuration & cutout : Pair / 3 unit
1) Recommend configuration
* With Partition
At more than 7 7/8” (200mm), the doors swing can open toward each
other at the same time and the doors open angle is 90 degree.
Partition thickness is dependent on handle depth. Dimension is
acceptable for Dacor handles.
OK
Column Column
3. Plan the configuration & cutout : Pair / 3
Pair
FDR or T
Column
OK
Column
unit
OK
FDR or T
OK
FDR or T
FDR or T
13
3. Plan the configuration & cutout : Pair / 3 unit
1) Recommend configuration
* With Partition
At 1 9/16” (40mm), the door swing can open same direction.
If the doors are opened at the same time, the one door open angle is
90 degree and then the other door is opened.
OK
Column Column Column
3. Plan the configuration & cutout : Pair / 3
3 Unit
OK
Column Column Column
unit
OK
Column Column FDR or T
OK
Column Column FDR or T
14
3. Plan the configuration & cutout : Pair / 3 unit
1) Recommend configuration
* With Partition
At more than 7 7/8” (200mm), the doors swing can open toward each
other at the same time and the doors open angle is 90 degree.
Partition thickness is dependent on handle depth. Dimension is
acceptable for Dacor handles.
4. Properly site the electrical and water supply outlet
Call Out
14” (356mm)
20” (508mm)
5 1/2” (140mm)
4. Properly site the electrical and water supply outlet
a
b
c
18” 24” 30” 36” 42”
80” (2032mm)
8” (203mm)
3” (76mm)
6” (154mm) 9” (228mm) 12” (305mm)
26” (660mm) 22” (559mm)
23
5. Accessory package
Hinge
Panel
Right
Fridge
Q'ty
Panel
Left
Fridge
Q'ty
Panel
Right
Freezer
Q'ty
Panel
Left
Freezer
Q'ty
Toe
Kick
Q'ty
Handle
Fridge
Q'ty
Handle
Freezer
Q'ty
RAC18AMLHMS
Modern
Modern
● 1
● 1
RAC18AMRHMS
Modern
Modern
1
● 1
Real STSS
Modern
● 1
● 1
Real STSS
Modern
1
● 1
RAC24AMLHMS
Modern
Modern
● 1
● 1
RAC24AMRHMS
Modern
Modern
1
● 1
Real STSS
Modern
● 1
● 1
Real STSS
Modern
1
● 1
RAC30AMLHMS
Modern
Modern
● 1
● 1
RAC30AMRHMS
Modern
Modern
1
● 1
Real STSS
Modern
● 1
● 1
Real STSS
Modern
1
● 1
RAC36AMLHMS
Modern
Modern
● 1
● 1
RAC36AMRHMS
Modern
Modern
1
● 1
Real STSS
Modern
● 1
● 1
Real STSS
Modern
1
● 1
Real STSS
● 1
● 1
Real STSS
1
● 1
Real STSS
● 1
● 1
Real STSS
1
● 1
Real STSS
● 1
● 1
Real STSS
1
● 1
Real STSS
● 1
● 1
Real STSS
1
● 1
RAF36AMAAMS
Modern
Modern
1 ● 1
● 1
Real STSS
1 ● 1
● 1
Real STSS
Modern
1 ● 1
● 1
RAT42AMAAMS
Modern
Modern
1 ● 1
● 1
Real STSS
Modern
1 ● 1
● 1
Real STSS
1 ● 1
● 1
5. Accessory Package
Acc. Code
RAC18AMLHSR
RAC18AMRHSR
RAC24AMLHSR
RAC24AMRHSR
RAC30AMLHSR
RAC30AMRHSR
CMF
Color
Graphite
Graphite
Graphite
Graphite
Graphite
Graphite
Accessory Package
Handle
L
R
L
R
L
R
L
R
L
R
L
R
●
●
●
●
●
●
1
●
1
●
1
●
1
●
1
●
1
●
1
●
1
●
1
●
1
●
1
●
1
●
RAC36AMLHSR
RAC36AMRHSR
RAC18AHLHSR
RAC18AHRHSR
RAC24AHLHSR
RAC24AHRHSR
RAC30AHLHSR
RAC30AHRHSR
RAC36AHLHSR
RAC36AHRHSR
RAF36AHAASR
RAF36AMAASR
RAT42AMAASR
RAT42AHAASR
L
All
All
All
All
All
All
R
L
R
L
Pro
R
Pro
L
Pro
R
Pro
L
Pro
R
Pro
L
Pro
R
Pro
Pro
Pro
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1
1
1
1
1
1
●
●
●
1
1
1
Graphite
Graphite
Graphite
Graphite
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1
1
1
1
1
1
1
1
1
1
1
1
3
3
3
2
●
2
●
2
●
24
2
2
2
5. Accessory package
Hinge
Panel
Right
Fridge
Q'ty
Panel
Left
Fridge
Q'ty
Panel
Right
Freezer
Q'ty
Panel
Left
Freezer
Q'ty
Toe
Kick
Q'ty
Handle
Fridge
Q'ty
Handle
Freezer
Q'ty
RAW24AMRHMS
Modern
Modern
1
● 1
RAW24AMRHSR
Real STSS
Modern
1
● 1
RAW24AMLHMS
Modern
Modern
● 1
● 1
RAW24AMLHSR
Real STSS
Modern
1
● 1
Real STSS
● 1
● 1
RAW24AHRHSR
Real STSS
1
● 1
5. Accessory Package
Acc. Code
RAW24AHLHSR
CMF
Color
Graphite
Graphite
Accessory Package
Handle
R
R
L
L
L
Pro
R
Pro
●
●
●
●
1
●
1
●
1
●
1
●
1
●
1
●
25
1) Door panel specification
(451 mm)
(603 mm)
(756 mm)
(908 mm)
17 3/4“ (450 mm)
35 3/4“ (908 mm)
Panel Max
Refrigeration appliance is designed to be equipped with a decorative door panel. A panel
can be custom-made or purchased as a Stainless Steel accessory. The table below illustrates
the dimensions of the Stainless Steel panel accessories and can be used as a guide in
creating custom panels.
5. Accessory Package
Callout
W1
W2 -
W3 -
W4
H1
H2 - 49 3/16” (1249 mm)
H3 - 30 9/16” (776 mm)
G1
G2
Panel
Thickness
Weight
COLUMN FDR T
18” 24” 30” 36” 36” 42”
17 3/4“
23 3/4“
79 7/8" (2,029 mm) -
55.0lb (25kg)
29 3/4“
- -
- 3/16” (5 mm) 5/32” (4 mm)
- 5/32” (4 mm)
35 3/4“
3/4“ (19 mm)
Fridge : 55.0lb (25kg)
Freezer : 22.0lb (10kg)
- -
20 25/32”
(528 mm)
-
-
26
1) Door panel specification
Panel Max
Refrigeration appliance is designed to be equipped with a decorative door panel. A panel
can be custom-made or purchased as a Stainless Steel accessory. The table below illustrates
the dimensions of the Stainless Steel panel accessories and can be used as a guide in
creating custom panels.
Wine
5. Accessory Package
Wine
Callout
W1
W2 3 9/32" (83.5 mm)
W3 17 5/32" (436 mm)
H1
H2 7 23/32" (196 mm)
H3 62 25/32" (1,594.5 mm)
H4
Panel
Thickness
23 3/4" (603 mm)
79 7/8" (2,029 mm)
9 3/8" (238.5 mm)
24”
3/4“ (19 mm)
27
Weight
55.0lb (25kg)
2) Handle style & specification
Pro Handle (silver), Modern Handle (silver or black)
PRO – HANDLE
MODERN - HANDLE
[ PRO HANDLE ]
B A A
B’A A
( T-Type Freezer )
[ MODERN HANDLE ]
B A A
B’A A
( T-Type Freezer )
Callout Dimension
C
C
D
D
A 1 29/32” (48.3 mm)
B 28 1/16” (712.6 mm)
B’11 5/16” (287.2 mm)
C 2 1/2” (63.5 mm)
D 1 7/8” (48.0 mm)
28
Dacor Handle Position
5. Accessory Package
[ COLUMN ]
UP
J
LOW
[ FDR ]
F
G
H
Fridge Fridge
K
L
M
N
Freezer
Fridge Fridge
Freezer
[ T ]
O
P
P
Freezer
Callout Dimension Callout Dimension
F 1 1/8” (28.5 mm)L 1 3/32” (27.5 mm)
G 16 3/4” (425.2 mm) M 1 11/16” (43.2 mm)
H 1 29/32” (48.3 mm) N 1 15/16” (49.5 mm)
J 9/16” (14.2 mm)O 1 3/32” (27.5 mm)
K 1 31/32” (50.2 mm) P 1 1/4“ (31.8 mm)
PANEL_LEFT HINGE
* PANEL_RIGHT HINGE is symmetry PANEL_LEFT HINGE
29
3) Toe kick plate style
Toe Kick plate STS (Silver or Black)
Single Installation Pair Installation
Type
Single
Installation
Pair
Installation
Cutout
Size
18"
24"
30"
36"
42"
42”
48"
54"
60"
66"
72"
Toe kick Size
Thickness Height Width
17 3/4” (451 mm)
23 25/32” (604 mm)
29 3/4“ (756 mm)
35 25/32” (909 mm)
41 3/8” (1051 mm)
Max 1/8”
(3mm)
3 25/32”
(96mm)
41 7/8” (1064 mm)
47 7/8” (1216 mm)
53 27/32” (1368 mm)
59 27/32” (1520 mm)
65 7/8” (1673 mm)
71 7/8” (1826 mm)
30
4) Pair Installation Kit
Trim center and Lever and Bracket up / low
TRIM CENTER
LEVER
BRACKET
UP
LOW
31
18-Inch Column - Freezer
DRZ18980LAP / DRZ18980RAP
6. Product Spec
SPECIFICATION
Cabi
Door
Smart
Metal Liner
Box material / EA Stainless Steel / 3EA
Ice Maker
Precise Cooling
Control Panel Silver Glass + White LED
Panel material Stainless Steel
Guard material /EA AL Die Casting + Glass / 4EA
Wifi (LTE) Module
Smart Camera -
Cabinet Stainless Steel
Multi Cover Stainless Steel
Shelf Glass(2), Metal(1)
Lighting 3 sided LED
Standard
Cocktail
●
● (삭제
●
●
)
Total Capacity (cu. ft.)
Product Width
Product Height
Product Depth
Cutout Width
Cutout Height
Cutout Depth
Energy
Electrical Supply
Power Cord Included
Net Weight (lbs)