Dacor AEHK2CP Installation Manual

HOOD MODELS: EH, EHR & MH

Halogen Bulb Replacement Kit

INSTALLATION

INSTRUCTIONS

WARNING: To prevent electric shock turn off power at the fuse or junction box before replacing
the light bulb. To avoid personal injury, make sure the cooktop or range, the hood and the light
are cool before changing the light bulb.

Parts included with this kit

Suction Cup

Halogen Bulb

To replace the light bulb:

STEP 1: Remove the right lter and turn off the main power switch.

STEP 2: Gently push the suction cup on the light replacement

B

A

tool A onto the lens of the light bulb B .

Part No. 104167 Rev. B

STEP 3: Turn the tool counter-clockwise until the bulb comes loose.

STEP 4: Remove the tool from the bulb and put it on the lens of the replacement bulb.

STEP 5: Screw the new bulb into the light fixture clockwise until it is tight. Turn on power at the fuse

or junction box. Turn on the main power switch and touch the light key to make sure it is
working.

STEP 6: Replace the filter.

2

3

1

Dacor ● 600 Anton Blvd. Suite 1000 Costa Mesa, CA 92626 ● Phone: [phone] ● Fax: [phone] ● www.Dacor.com