D2G Fgsteelsb User Manual
MOUNTING INSTRUCTIONS - FGSTEELSB
Ver. 09/19
Thank you for purchasing the heavy duty, highly visible steel bollard! It should be mounted on flat level concrete.
Mounting anchors are included in the box. For other applications, use hardware suitable for the surface.
IMPORTANT: For your safety, the bollard must be installed in accordance with applicable installation code by a licensed person who is familiar with the construction of the product and harzards that
may be involved.
Step 1. Use the steel bollard as a template, mark the
center of the holes on the flat concrete floor through the
base plate of the bollard.
Remove the bollard and drill the four holes at marked
locations.
Step 3. Remove nuts and washers from the expansion
anchors, and align the mounting holes with anchors to
install the metal bollard body to the desired location.
Step 2. Insert 4 expansion anchors into the holes.
Use Hammer to set anchors as needed.
Step 4. Secure the bollard by tightening nuts with flat
washer and lock washer to the installed anchors.
The installation is completed.
Scan QR code to visit
the product page:
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer
service at 844-221-3388.
Loading...