CZone Display Interface Quick Manual

Product description:

The CZone Display module (DI) is the CZone systems user interface, it has the ability to control DC circuits, display important on board

systems information and can be used to set all Zone parameters both for initial installation and future systems maintenance

Suitable to use as the main systems controller/display at the helm or nav station or as a secondary display in an owners cabin or engine room

Simple connection, power and NMEA

• 3.5” Transfl ective QVGA LCD

• IpX7

• Rotary Knob for easy menu navigation

• Simple UI

• Power consumption @12V: 180mA (standby 130mA)

Dimensions:

H 105mm (4”3/32) x W165mm (6”7/16) x D 62mm

(2”13/32)

Weight:

374g

DC Power Meter:

• Displays Voltages of multiple battery banks includes

low and high voltage alarms

• Displays charge and discharge (amps) of multiple

battery banks

• Displays battery capacity in ampere hours and %

charge/discharge, includes low ampere hour alarm

AC Power Meter:

• Displays multiple line voltages (230 and 110V),

includes high and low voltage alarm

• Displays AC line frequencies, includes High and low

frequency alarm

• Displays AC power consumption in kW (calculation

uses power factor for true RMS)

DI features:

Fluid level display:

• Displays multiple tank levels and multiple fl uid types

• Fuel (Diesel and Gas)

• Fresh water

• Black water

• Grey water

Switching thresholds can be set for tank levels to raise alarms or to

control an output i.e. a ballast pump can be automatically con-

trolled via the ballast water level

Switching channel control:

All DC control circuits can be toggled on or off

Systems in operation:

• Displays operation of circuits of interest ie Bilge pumps,

engine room lights etc

• Displays systems faults and alarm conditions

(programmable)

• Repeater for other NMEA 2000 broadcasted data

EMC ratings:

• IEC EN 60945

• IEC EN 61000

• FCC Class B

• ISO 7637 - 1 (12V Passenger cars and light

commercial vehicles with nominal 12 V supply

voltage - Electrical transient conduction along

supply lines only)

• ISO 7637 - 2 (24V Commercial vehicles with nominal 24 V

supply voltage - Electrical transient conduction along supply

lines only)

• IEC Standards for indirect lighting strikes

Inputs:

Network, NMEA 2000

5 – 35V DC

Display Interface (DI)

For more information contact BEP | ph: [phone] | email: [e-mail] | www.bepmarine.com

Operation

For more information contact BEP | ph: [phone] | email: [e-mail] | www.bepmarine.com



Main Screen Monitoring Page

DC Monitoring Tank Monitoring

AC Monitoring Main Control Page



Control Page Detailed Control Page

Settings Menu Alarms Page

Operation

For more information contact BEP | ph: [phone] | email: [e-mail] | www.bepmarine.com

Pictorial Overview

Menu – returns user to main menu page (as shown below)

ESC – Escape key, returns to previous screen

Ent – Enter key, navigates to next screen or confi rms prompt

Rotary Knob – Scrolls cursor bar up and down through menu lists,

used to navigate alpha numeric lists in confi guration pages

Off (-) – Turns circuit off, decreases values in set up screens such as

backlighting level

ON (+) – Turns circuits on, Increases values in set up screens such as

backlighting level

Power Key – Turns display off and on

Main Menu page

NMEA 2000 connector Power connector

Top View (mounted in panel)

Connections

For more information contact BEP | ph: [phone] | email: [e-mail] | www.bepmarine.com

Dimensions

For more information contact BEP | ph: [phone] | email: [e-mail] | www.bepmarine.com

Dimensions

For more information contact BEP | ph: [phone] | email: [e-mail] | www.bepmarine.com