UserInstructions
CyrusDVD7
Information
017
1:22:5
17
15:
FTS
3
51:
017
R
TEREO
IN
C-BUS
PREC
DIGI
INSTRU
MADE
OUT
Cyrus DVD7
ab c d e
OUT
DIGITAL
COAXIAL
DIGITAL
OPTICAL
AUDIO OUTPUTS
STEREO
USE
PSX-R
ONLY
L
R
Manufactured under licence from Dolby Laboratories. "Dolby",
"AC3", "Pro Logic" and the double-D symbol are trademarks of
DolbyLaboratories. Confidential unpublishedworks. ©1992-1997
Dolby Laboratories Inc. All rights reserved.
MC-BUS
ApparatusClaims of U.S.
Patent Nos. 4,631,603;
4,577,216; 4,819,098
and 4,907,093 licensed
for limited viewing uses
IN
230V
50/60Hz
20W
MADEIN ENGLAND
PRECISION
DIGITAL
INSTRUMENT
AV CONNECTOR OUT
VIDEO
OUT
S-VIDEO
OUT
Information
DVD
Information is on-screen
Information siehe Bildschirm-Anzeige
Información en pantalla
Information sur l'écran
Fig 1
Fig 2
i
1) 1! 1@ 1# 1$ 1%
017
DVD7
1^1&1*1(2)2!
4#
4@
4!
4)
3(
3*
3&
INPUT
MUTE
STEREO
2@
2#
2$
2%
2^
2&
fgh
Pause symbol
Pausen-Symbol
Simbolo de pausa
Symbole de pause
017
Chapter
Kapitel
Capitulo
Chapitre
1:22:55
Elapsed time
Spielzeit
Tiempo restante
Temps écoulé
DVD
Elapsed time
Spielzeit
Tiempo restante
Temps écoulé
3
51:13
VCD
Track
Titel
Pista
Plage
Track
Titel
Pista
Plage
Elapsed time
Spielzeit
Tiempo restante
Temps écoulé
Fig 3
3^
3%
3$
3#
3@
3!
2*
2(
3)
FTS
17
15:15
FTS Program mode
FTS-Programm aktiv
Modo de programa FTS
Mode programme FTS
CD
Cyrus DVD7
Cyrus DVD7 User Instructions
IMPORTANT!
CAUTION:
to important instructions and safety procedures in this
manual.
ATTENTION:
electrical shock presented by components inside this
product. Unauthorised personnel must not open this unit
WARNING:
covers or panels. There are no user serviceable parts in this product.
WARNING:
equipment to rain or moisture.
HEED WARNINGS:
instructions should be adhered to.
READ ALL THE INSTRUCTIONS:
should be read before the product is operated.
RETAIN INSTRUCTIONS:
retained for future reference.
FOLLOW INSTRUCTIONS:
followed.
CLEANING:
liquid or aerosol cleaners. Use a damp cloth for cleaning.
WATER AND MOISTURE:
Read before operating this equipment!
The exclamation mark is to draw your attention
The lightning flash warns you of the risk of
.
To reduce the risk of electrical shock do not remove any unit
To reduce the risk of electric shock, do not expose this
All warnings on the product and in the operating
All the safety and operating instructions
The safety and operating instructions should be
All operating and use instructions should be
Unplug this product from the mains before cleaning. Do not use
Do not use this product near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement; or near a swimming pool and the like. The product must
not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the product.
HEAT:
The product should be situated away from heat sources such as
radiators, stoves, or any other products (including amplifiers) that produce
heat.
VENTILATION:
to ensure reliable operation of the product and to protect it from overheating
and these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug or similar surface.
This product should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.
OBJECT OR LIQUID ENTRY:
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
ACCESSORIES:
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand, tripod,
bracket or table recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer's instructions,
and should use a mounting accessory recommended by the manufacturer.
ATTACHMENTS:
manufacturer as they may cause hazards.
MOVING THE PRODUCT:
should be moved with care. Sudden stops, excessive
force, and uneven surfaces may cause the product and
POWER SOURCES:
power source indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
OVERLOADING:
convenience receptacles. This can result in an increased risk of fire or electric
shock.
Slots and openings in the cabinet are provided for ventilation,
Never push objects of any kind into this
Do not place this product on an unstable cart, stand, tripod,
Do not use attachments not recommended by the product
A product and cart combination
This product should be operated only from the type of
Never overload wall outlets, extension cords, or integral
POWER CORD PROTECTION:
they are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
NAKED FLAMES:
on this product.
LIGHTNING:
when it is left unattended or unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
CAUTION! POLARISED CONNECTOR (CANADA and USA):
To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
Do not alter or remove this plug if it does not fit your mains power socket.
Have a suitable socket installed by a competent electrician.
No naked flame sources, such as candles, must be placed
For added protection for this product during a lightning storm, or
Power supply cords should be routed so that
POWER SUPPLY:
The moulded IEC connector of the AC cord supplied plugs into the power inlet
h on the rear of the unit.
The mains supply requirement for your DVD7 is marked on a label on the rear
panel. Before connecting, check that this voltage is the same as your mains
supply.
If you move to an area with a different mains voltage, contact your local Cyrus
distributor to have your product converted.
There are no user replaceable fuses in this unit.
230V Products: Voltage Range 220V-240V
115V Products: Voltage Range 110V-120V
NOTE FOR UK CUSTOMERS:
The DVD7 is supplied with a power cable terminated by a fused 13A mains
plug. This plug should not be removed but if it is removed, dispose of it safely
and do not re-use it. To connect a new 13A plug, proceed as follows: Connect
the brown wire to the terminal marked L or coloured red. Connect the blue
wire to the terminal marked N or coloured black. The internal plug fuse should
be 3A.
SERVICING:
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
CONDITIONS REQUIRING SERVICE:
outlet and refer servicing to qualified service personnel when:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the product.
•
If the product has been exposed to rain or water.
•
If the product has been dropped or damaged in any way.
•
If the product does not operate normally by following the operating
instructions. (Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other controls may
result in damage requiring extensive work by a qualified technician
to restore the product to its normal operation).
•
When the product exhibits a distinct change in performance.
REPLACEMENT PARTS:
service technician has used replacements specified by the manufacturer or
have the same characteristics as the original part. Unauthorised substitutions
may result in fire, electric shock, or other hazards.
SAFETY CHECK:
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
When replacement parts are required, be sure the
Upon completion of any service or repairs to this product,
Unplug this product from the wall
PRODUCT SERVICE CENTRES:
For product service or technical advice, contact only authorised Cyrus service
centres. The Cyrus distributors are listed at the end of this instruction manual.
Manufactured under license from Dolby Laboratories. "Dolby", "AC-3", "Pro Logic" and the
double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
Copyright 1992 - 1997 Dolby Laboratories, Inc. All rights reserved.
DTS is a registered trademark of Digital Theater Systems Inc.
1
GB
GB
User Instructions Cyrus DVD7
Welcome to the world of
Congratulations on your choice of Cyrus Audio-Visual products. Our state-of-theart design technology and outstanding quality of manufacture has won
countless awards around the world. We are confident that you will derive
great pleasure from owning a product from one of the most recognised and
respected manufacturers of audio-visual equipment.
Please read these instructions carefully before commencing installation. They
provide full guidance to help you install your Cyrus DVD7 safely and correctly.
Cyrus!
Preparations for Installation
Before installing the DVD7 check that the following items are included in the
accessory box.
•
Warranty Card (with instruction manual)
•
AC Mains Cable
•
Remote Control Handset
•
2 x Phono leads for MC-Bus connection
•
SCART output cable
After removing these items, please retain the packaging.
Install the DVD7 in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the DVD7 under another unit or on
any surface likely to hamper its cooling or ventilation.
INSTALLATION
Key to the rear panel drawing:
1. Digital Audio Output 6. S-Video output
2. Optical Audio Output 7. Composite video output
3. Analogue Audio output 8. AC power inlet
4. MC-Bus connections 9. PSX-R connection
5. SCART A/V output
(Refer to Fig.1)
Connecting the Video Output to a Television
The video output of the DVD7 may be connected to the television in three
different ways. The choice of connection and the picture quality achieved will
depend on the options available at the TV. The connections available from the
DVD7 are-
AV CONNECTOR OUT socket e (SCART connection). This is the most
convenient connection. The SCART connector includes both RGB and
composite video signal formats. This connection will provide the best picture
quality results where the television is equipped with RGB input via the SCART
connection. When connecting a projector or monitor equipped with individual
connectors for RGB input, a SCART breakout cable will be required.
S-Video (Y/C) connection from the S-VIDEO OUT socket f. This system
offers superior quality to a composite connection and should be used if the TV
has no SCART input or if the SCART input does not include RGB
connections.
Composite connection from the VIDEO OUT socket g. If SCART or S-VIDEO
connections are not available, a single phono connection may be made from
this socket to the video input of the television.
Connecting Digital Audio to a Multichannel
Surround Sound Decoder
For Multi-Channel surround sound systems the COAXIAL a or OPTICAL b
digital audio outputs from the DVD7 must be connected to a suitable input of
a Cyrus digital surround sound decoder.
Connecting Audio to a Stereo System
If a Surround Sound decoder is not to be used the STEREO audio outputs c
of the DVD7 may be connected to a Cyrus stereo amplifier or preamplifier.
The VI or AV inputs are recommended for this.
Connecting the Audio Output to a Television
If DVD sound is required from the television, the audio output from the DVD7
may be connected to the television in two different ways. The connections
available are-
SCART connection from the AV CONNECTOR OUT socket e. If the SCART
connector is in use for video connection, stereo audio will automatically be
connected through the same cable.
STEREO audio output c. If S-Video or composite video connections are in
use to the television then a separate audio connection may be made from the
audio output sockets c.
Connecting a
The Cyrus PSX-R is a high quality regulated power supply, the use of which
will elevate your DVD7 into a true world-class state-of-the-art product.
The connector fitted to the umbilical cable from the PSX-R must be securely
connected to the PSX-R socket i on the rear of the DVD7. When correctly
fitted, the connector will latch into the socket.
Note:
The PSX-R power supply and the DVD7 will both require connection to
the mains supply.
Cyrus PSX-R
Mc-Bus System Connection (Optional)
By using the MC-Bus connection on your DVD7, a highly functional integrated
system with full remote control may be set up. This feature is usable if you
own a Cyrus amplifier or digital surround decoder. Refer to the relevant
product handbook for MC-Bus wiring instructions.
GB
GB
2
Cyrus DVD7 User Instructions
Quick Reference Guide to the Front Panel
Functions
10. Standby ......................................Switches the DVD7 on and off.
11. Standby Light .............................Indicates when the player is set to
12. Remote Eye ...............................Remote command receiver.
13. Display Window .........................DVD7 status display.
14. Open ..........................................Opens the disc loading drawer.
15. Disc loading tray ........................Load all discs label side up.
16. Repeat .......................................Sets repeat modes.
17. Skip/Search Forward .................Press briefly to skip forward, hold to set
18. Skip/Search Reverse.................Press briefly to skip forward, hold to set
19. Stop............................................Stops play.
20. Pause .........................................Pauses playback with still picture. Press
21. Play ............................................Sets normal playback.
(Fig.2)
Standby.
fast search forward.
fast search.
again for frame advance.
Quick Reference Guide to the Remote Control
Functions
Keys 22~23 operate the DVD7 and a Cyrus Surround Decoder (AV5 etc.)
22. Power on ....................................Switches on the DVD7 and AV5.
23. Power off ....................................Switches the DVD7 and AV5.to Standby
Keys 24~39 operate the DVD7 only
24. OSD ...........................................Switches on the On-screen display. Hold
25. Angle ..........................................Selects camera angle options.
26. Menu ..........................................Selects the menu from a DVD.
27. Return ........................................Moves up one menu level.
28. Setup..........................................Selects the player set-up menu.
29. Skip/Search Fwd/Rev................Press briefly to skip, hold to set fast
30. Display .......................................Switches off the player display.
31. Stop............................................Stops play.
32. Slow motion ...............................Sets slow motion playback.
33. Pause .........................................Pauses playback. Press again for frame
34. Play ............................................Sets normal playback.
35. T-C .............................................Sets Title or Chapter selection. Use the
36. Numeric Keypad ........................For numeric selection.
37. Navigation keys .........................For use in conjunction with the Menu
38. Sub.............................................For selecting subtitles.
39. Audio ..........................................To select the audio language.
Keys 40~43 operate a Cyrus Surround Decoder (AV5 etc.)
40. Input select.................................Input selection keys.
41. Stereo select ..............................Stereo mode key.
42. Volume .......................................Volume control.
43. Mute ...........................................Mute key.
(Fig.3)
the key for permanent OSD.
search.
advance.
numeric keypad to enter the chosen
number.
systems.
Quick Reference Guide to the On-Screen Display
Icons
...................................................Play
...................................................Pause
...................................................Stop
4
...................................................Search forward
4
...................................................Search backward
1
1
2
...................................................Slow forward
...................................................Repeat disc
T
...................................................Repeat title
C
...................................................Repeat chapter
TITLE
07
...................................................Title indication
CHAPT
03
...................................................Chapter indication
1
4
8
...................................................Disable function
73
...................................................Angle
11
...................................................No alternative angle
DE
...................................................Subtitle language
AUDIO
1 EN
...................................................Audio language
AC3
6CH
...................................................Audio system
1:10:27
...................................................Elapsed time
...................................................Resume
1:59:17
...................................................Total time
OPERATION
Switching On
The mains power to the DVD7 should normally be left on unless left
unattended for a long period when the mains power at the wall socket should
be switched off or the product disconnected from the AC supply.
When power is applied, the STANDBY key 1) is used for power control. The
Standby light 1! shows red when the DVD7 is in Standby and green when
operational. At this time the ‘CYRUS’ logo will also show on the TV screen.
NOTE: If the DVD7 is set to a mode which shows a still picture or the logo
screen for more than 15 minutes, the image brightness is decreased to
reduce the possibility of damage to the TV screen.
Disc Compatibility
The DVD7 is compatible with DVD-Video discs, VCD Video-CDs and audio
CDs. Instructions for playing each type of disc follow the next section.
NOTE: DVD-Video discs include a global ‘region’ identifier. The DVD7 will
only play discs purchased in the same global region as the player. The region
setting of the DVD7 is shown on a globe symbol at the rear of the player.
Ensure that all discs purchased have the same region symbol as the player or
are marked region 0 which will play in any global region.
Loading a Disc
Press the OPEN key 1$ to open the disc tray. Place a disc in the tray with the
label side upward. Press the OPEN key 1$ again. The disc tray will load into
the player. The DVD7 display will show ‘Reading’ while checking the contents
of the disc.
3
GB
GB
User Instructions Cyrus DVD7
Playing a DVD-Video Disc
You will recognize DVD-Video discs by the logo. Depending on the material
on the disc (a movie, video clips, a drama series, etc.) it may have one or
more Titles, and each Title may have one or more Chapters. Play stops at the
end of each Title. To make access easy and convenient, the DVD7 lets you
move between Titles, and also between Chapters.
On-Screen Display (OSD)
During playback of a DVD-Video disc, various icons will appear on the TV
screen for about 2 seconds to confirm that a function has been selected. You
can switch these off by pressing
At any time during play, you can press
shows you which functions are active, for about 2 seconds. To keep the Play
Banner on the screen, hold down
the Play Banner, press
A table of the OSD icons is shown in the ‘Quick Reference Guide’.
Playing the disc
Press
instructions), play starts when you close the disc drawer.
NOTE: Some DVD-Video discs carry their own Autoplay, in which case play
always starts automatically. The disc may invite you to select an item from a
menu. If the selections are numbered, press the appropriate
3^; if not, use the
OK
Play will stop at the end of a Title and this can result in return to menu. To
move to the next Title, press
To stop play at any other time, press
You can resume play from the point at which you stopped. Press
The resume feature applies, not only to the disc in the player, but also to the
last four discs you have played. Simply re-insert the disc, press
Autoplay is off, and when you see the Resume icon on the screen, press
again.
Moving to another chapter
When a title on a disc has more than one chapter (which you can see from
the play display), you can move to another chapter by pressing
briefly during play to step through the chapter sequence.
To go directly to any chapter, enter the chapter number using the
keys 3^. If the number has more than one digit, press the keys in rapid
succession.
For more information about chapters, see “Checking the contents of DVDVideo discs: Menus”
Moving to another title
When a disc has more than one title (which you can see from the OSD if you
press
To go directly to any title, press
Numerical
rapid succession.
For more information about titles, see “Checking the contents of DVD-Video
discs: Menus”
Parental control
If you activate Parental Control, only discs that you have already authorised
as suitable for all ages can be played as above. To play any other DVD-Video
disc, the OSD will ask you to enter your Parental Control PIN code. When this
has been done, play starts automatically. To activate Parental Control, and to
authorize discs, see Activating Parental Control.
NOTE:- If you forget your PIN code, you can erase it when the code is
requested as above, by pressing the
then be de-activated. To re-activate it, see Activating Parental Control.
Still picture and step frame
To get a still picture, press
To step forward to the next picture frame, press
To return to play, press
Search
To search forwards or backwards through the disc at 4x normal speed, press
and hold
to play the disc. With AUTOPLAY on (see ‘SETTINGS’ for Autoplay
Navigation
.
OSD
), you can move to another title by pressing
briefly during play to step through the title sequence.
keys 3^. If the number has more than one digit, press the keys in
or for about 1 second during play. Search begins, and sound
OSD
.
OSD
to call up the Play Banner, which
OSD
OSD
again.
during play.
.
for a couple of seconds. To switch off
keys 3& to highlight your selection, and press
.
.
T-C
, then press
T-C
, then enter the title number using the
key four times. Parental Control will
again.
Numerical
or
Numerical
key
twice.
is muted. To step up to 32x normal speed, hold
screen icon changes. To return to 4x normal speed, press
Search speed and direction are indicated on the screen for 2 seconds each
time
or is pressed.
To end the search, press
Slow motion
Press
Press
Press
Press again to play video at ½ normal speed.
Play speed is indicated on the screen for 2 seconds each time the button is
pressed.
To exit slow motion mode, press
Repeat chapter/title/disc
To repeat the currently playing chapter, press the
symbol will appear on the player display and the Repeat Chapter icon will be
displayed on the TV screen.
To repeat the currently playing title, press
Title icon will now be displayed on the TV screen.
To repeat the entire disc, press
now be shown on the TV screen.
To exit Repeat mode, press
Camera angle
If the disc contains sequences recorded from different camera angles, the
angle icon appears showing the number of available angles, and the angle
being shown. You can then change the camera angle if you wish.
To select another angle, press
angle.
if
To go to any angle directly, enter the angle number using the
3^.
NOTE:- The Angle icon remains on the screen unless you turn off the angle
feature.
To turn off the angle feature, press
Changing the audio language and channel configuration
This changes the language and the audio channel configuration when
alternatives are available on the disc.
Press
icons will appear on the screen for 2 seconds.
Press
language changes. If the sound configuration changes too (for example from
multichannel to stereo) this is also indicated.
Subtitles
or
When subtitles are available on a disc, you can turn them on by holding
down during play until the subtitles appear. To step through the language
options, press
again.
Checking the contents of DVD-Video discs: menus
For titles and chapters, selection menus may be included on the disc. The
DVD7’s menu feature allows you to make selections from these menus. Press
the appropriate
your selection and press OK.
Press
TV screen. The “root” menu can list camera angles, spoken language and
subtitle language options, and chapters for the title. To exit the “root” menu,
press
Press
on the TV screen. To remove the title menu, press
to play video at ½ normal speed with sound muted.
again to play at ¼ normal speed.
again to play at ⅛ normal speed.
AUDIO
during play. The Audio language and Channel configuration
AUDIO
repeatedly to step through the options. At each step, the
SUB
repeatedly. To turn the subtitles off, hold
Numerical
MENU
:- If the present title has a “root” menu, this now appears on the
MENU
again.
T-C
followed by
MENU
or as desired.
or / as desired.
a third time. The Repeat Disc icon will
again. The Repeat symbol will switch off.
ANGLE
. The Angle icon will show the next
OSD
, the Angle icon will disappear.
key 3^; or use the
. If the disc has a title menu, this now appears
or again until the
key once. The Repeat
a second time. The Repeat
Navigation
keys 3& to highlight
T-C
again.
or again.
Numerical
SUB
down
keys
SUB
GB
GB
4
Cyrus DVD7 User Instructions
Playing a Video CD
You will recognize Video CDs by the logo. Depending on the material on the
disc (a movie, video clips, a drama series, etc.) it may have one or more
tracks, and each track may have one or more indexes, as indicated on the
disc case. To make access easy and convenient, your player lets you move
between tracks, and between indexes.
Some Video CDs have Playback Control (PBC), which is a pre-defined
playback sequence stored on the disc.
On-Screen Display (OSD)
During playback of a Video CD, various icons will appear on the TV screen for
about 2 seconds to confirm that a function has been selected. You can switch
these off by pressing
At any time during play, you can press
shows you which functions are active, for about 2 seconds. To keep the Play
Banner on the screen, hold down
the Play Banner, press
A table of the OSD icons is shown in the ‘Quick Reference Guide’.
Playing a disc
Press
Autoplay instructions), play starts when you close the disc drawer. As the disc
plays, the display shows the current index and the elapsed playing time. Play
will stop at the end of the disc. To stop at any other time, press
You can resume play from the point at which you stopped. Press
The resume feature applies, not only to the disc in the player, but also to the
last four discs you have played. Simply re-insert the disc, press
Autoplay is off, and when you see the Resume icon on the screen, press
again.
Moving to another track
When a disc has more than one track (which you can see from the OSD if you
press
Press
sequence.
To go directly to any track, press
Numerical
NOTE:- If the number has more than one digit, press the keys in rapid
succession.
Moving to another index
When a track on a disc has more than one index (which you can see from the
play display), you can move to another index as follows:
Press
To go directly to any index, enter the index number using the
3^.
NOTE:- If the number has more than one digit, press the keys in rapid
succession.
Playback control (PBC)
Insert a Video CD with PBC and press
TV screen.
Go though the menu with the keys indicated on the TV screen until your
chosen passage starts to play. If a PBC menu consists of a list of titles, you
can select a title directly.
Enter your choice with the
Press
Press
to play the disc. With AUTOPLAY on (see ‘SETTINGS’ for
OSD
), you can move to another track as follows:
T-C
, then press
key 3^.
or briefly during play to step through the index sequence.
to start the play of the selected title.
RETURN
OSD
.
OSD
to call up the Play Banner, which
OSD
OSD
again.
or briefly during play to step through the track
Navigation
to go back to the previous menu.
for a couple of seconds. To switch off
T-C
, then enter the track number using a
. The PBC menu will appear on the
keys 3& or
Numerical
.
Numerical
keys 3^.
twice.
keys
Parental control
If you activate Parental Control, only discs that you have already authorised
as suitable for all ages can be played as above.
To play any other Video-CD, the OSD will ask you to enter your Parental
Control PIN code. When this has been done, play starts automatically.
To activate Parental Control, and to authorize discs, see Activating Parental
Control.
NOTE:- If you forget your PIN code, you can erase it when the code is
requested as above, by pressing the
then be de-activated. To re-activate it, see Activating Parental Control.
Still picture and step frame
To get a still picture, press
frame, press
Search
To search forwards or backwards through the disc at 4x normal speed, press
or for about 1 second during play. Search begins, and sound is
muted.
To step up to 32x normal speed, hold
changes.
To return to 4x normal speed, press
Search speed and direction are indicated on the screen for 2 seconds each
time
To end the search, press
Slow motion
if
Press
Press
Press
Press
Play speed is indicated on the screen for 2 seconds each time the button is
pressed.
To exit slow motion mode, press
Repeat track/disc
To repeat the currently playing track, press the
symbol will appear on the player display and the Repeat Track icon will be
displayed on the TV screen..
To repeat the entire disc, press
now be shown on the TV screen.
To exit Repeat mode, press
again. To return to play, press .
or is pressed.
to play video at ½ normal speed with sound muted.
again to play at ¼ normal speed.
again to play at ⅛ normal speed.
again to play video at ½ normal speed.
during play. To step forward to the next picture
key four times. Parental Control will
or again until the screen icon
or again.
or
as desired.
/
or
a second time. The Repeat Disc icon will
again. The repeat symbols will switch off.
as desired.
key once. The
5
GB
GB
User Instructions Cyrus DVD7
Playing an audio CD
Audio CDs contain music tracks only. You can play audio CDs using the OSD
or, through a stereo system only, using keys on the remote control and/or
front panel.
Playing an audio disc
Press
Autoplay instructions), play starts when you close the disc drawer.
As the disc plays, the player display shows the current track, and the elapsed
playing time.
On-Screen Display (OSD)
If the TV is connected and switched on during playback of an audio CD, the
CD OSD may be used to navigate the contents of the disc.
The OSD shows the following information-
•
•
•
•
•
Pause
Press
Moving to another track
You can move to another track by pressing or briefly during play to
step through the track sequence.
To go directly to any track, enter the track number using the
3^.
NOTE:- If the number has more than one digit, press the keys in rapid
succession.
Search
To search forwards or backwards through the disc at 4x normal speed, hold
partially muted.
To step up to 8x normal speed, hold
search speed. Sound is now completely muted.
To return to 4x normal speed, press
To end the search, press
Repeat track/disc
To repeat the current playing track, press the
symbol will appear on the player display and the repeat track icon will be
displayed on the TV screen..
To repeat the entire disc, press
now be shown on the TV screen.
To exit Repeat mode, press
to play the disc. With AUTOPLAY on (see ‘SETTINGS’ for
Time display, showing total disc time
Track display, showing total number of tracks
Central track selection bar
Track total time
Track elapsed time
during play. To return to play, press .
Numerical
or for about 1 second during play. Search begins, and sound is
or again. The OSD will show the
or again.
or as desired.
key once. The Repeat
a second time. The Repeat Disc icon will
again. The Repeat symbols will switch off.
keys
FTS (Favourite track selection) programming
The FTS option is an advanced system for track programming of an audio
CD. When using FTS the DVD7 will memorise your selection of favourite
tracks and recall these each time the disc is loaded to play. The DVD7 can
also be set to automatically play this track sequence (Auto FTS) when an
FTS programmed disc is loaded.
NOTE:- FTS Favourite Track Selections are compiled and played using the
OSD: ensure that the TV is on.
Playing an FTS program
If Auto FTS is set to on, play of an FTS program will start immediately. If Auto
FTS is off:
1. Insert a disc and set Stop mode.
2. Press
3. Press
instructions below to “exclude tracks” or “select tracks”.
Compiling an FTS program
FTS programs can be compiled by selecting the tracks you want to play
(“Track Selection”) or by excluding the tracks you don’t want to play
(“Excluding Tracks”).
To exclude Tracks:
1. Insert a disc and set Stop mode
2. Press
3. Use
4. Press
5. Repeat steps 3 and 4 to exclude further track numbers in the same way.
If you change your mind, you can re-include any track number by moving
back to it and pressing
6. To clear your whole selection and start again, press
To select Tracks
1. Insert a disc and set Stop mode.
2. Press
3. Use
4. Press
5. Repeat steps 3 and 4 to select further track numbers in the same way. If
you change your mind, you can de-select track numbers in reverse order by
pressing
6. To clear your whole selection and start again, press
When your FTS program is complete, press
go back to Stop mode. In either case, the FTS program will be automatically
memorized.
NOTE:- You can have a total of at least 100 FTS programmed discs. If you
exceed that number, the least frequently played FTS program(s) are
automatically deleted.
or to call up an existing FTS program or enter a new one.
if you wish to play an existing FTS program or follow the
.
or to move to the first track number you want to exclude.
.
.
.
or to move to the first track number you want to select.
.
as required.
to start play, or
.
.
RETURN
to
GB
GB
6
Cyrus DVD7 User Instructions
Settings
In the settings menu, you can customize your player to suit your own
particular requirements.
In Stop mode:
SETUP
Press
Move to the function you want to change using
your preferred option.
To exit Settings menu, press
The following settings may be changed for the DVD7-
Audio
The sound will be in the language you choose provided this is available on the
disc in play. If not, speech will revert to the first spoken language on the disc.
Subtitle
The subtitles will be in the language you choose provided this is available on
the disc in play. If not, subtitles will revert to the first subtitle language on the
disc.
Parental Control
Parental Control is described separately under the ‘Parental Control’ section.
TV Shape
Factory setting 16:9 (wide screen). If you have a regular (4:3) TV, you can
choose Letterbox for a ‘wide-screen’ picture with black bars top and bottom,
or Pan Scan, for a full-height picture with the sides trimmed. If a disc has Pan
Scan, the picture then moves (scans) horizontally to keep the main action on
the screen.
Auto Play
Factory setting ON means that discs start to play automatically when inserted.
Set to OFF if you prefer to start play manually.
Auto FTS
Factory setting ON means that when an audio disc with an FTS program (see
‘Compiling and FTS program’) is inserted, the FTS program automatically
starts to play. Set to Off if you prefer to control FTS play manually.
Digital Output
Factory setting OFF means that there is no audio signal at the digital output. If
you are connecting equipment with a digital input, change the setting to ALL.
If your equipment doesn’t include a digital surround sound decoder, (e.g.
digital speakers) set the digital output to PCM.
Video Shift
Factory setting centers the video on your TV screen. Use this setting to
personalize the position of the picture on your TV by scrolling it to the left or
right.
OSD Language
The player’s on-screen display will be in the language you choose.
3-D Sound
To enjoy multichannel sound even on two speakers, turn 3D Sound on.
to obtain the Settings screen.
RETURN
or
SETUP
then use to scroll to
.
Parental control
Activating parental control
This can only be done in Stop mode.
1. Press
2. Move to Parental Control using .
3. Press
4. You will be asked to enter a 4-digit pin code of your own choice, and
then to confirm your choice.
5. This code must be entered to play any DVD-Video or Video CD disc,
unless you have previously authorized the disc as suitable for all ages.
6. To de-activate Parental Control repeat the above procedure.
Authorising discs
1. Insert the disc you wish to authorize and close the tray.
The OSD will ask for your pin code.
2. Enter your pin code.
3. Press
4. Select Parental Control on the OSD by pressing
The OSD will ask for your pin code.
5. The disc is now authorized, and will in the normal way, without the pin
code.
To cancel your authorization, repeat steps 4 and 5.
NOTE:- You can have a total of 50 authorized discs. If you exceed that
number, the least frequently played disc(s) are automatically de-authorized.
SETUP
to obtain the Settings menu.
or to change Parental Control to Active.
.
.
7
GB
GB
User Instructions Cyrus DVD7
TROUBLESHOOTING GUIDE
If your DVD7 is not operating properly, disconnect the power and check all
connections using the notes in this handbook. If problems persist, the
checklist below may help.
If you are in any doubt, consult your dealer.
Disc Spinning with no picture or sound (all discs)
Switch off the power to the system and check that connections have been
correctly made from the DVD7 to the TV, amplifier or surround decoder.
Check that all equipment is switched on and that the correct input is selected
at the TV, amplifier or surround decoder.
Disc Spinning with no sound (one particular disc)
Check in the disc MENU that the correct audio mode is selected for your
system.
Region warning displayed when a disc is loaded
Check that the region symbol on the disc matches the region symbol on the
rear panel of the player (number with a globe symbol). To avoid this problem
ensure that discs are only purchased in the same global region as the player.
Picture stops and jumps to another scene
The disc may be dirty or badly scratched. Try playing another disc. If the other
disc plays ok, try cleaning the 1
NOTE:- Some discs feature dual layers. Playback will pause momentarily
whilst the player changes layer. This will only happen once during playback of
such discs.
will not select all tracks on an audio disc
DVD7
Auto FTS may be set with a program stored. This will play only the memorised
favourite selection of tracks.
No display
The display may have been switched off at the handset. Press the display key
again to restore the display and backlight.
No Remote Operation
The handset batteries may need to be replaced:
Remove the battery compartment cover located underneath the unit. Remove
the batteries and replace with new ones carefully noting the orientation
marked in the bottom of the battery case.
The batteries in the unit should only be replaced with new batteries type AAA
(I.E.C. LR03).
st
disc.
Laser Product
This label on the rear panel tells
you that the unit contains a Laser
component. Opening this unit will
expose the user to radiation from
the laser beam.
WARRANTY
The warranty card enclosed should be completed by the Dealer and
the purchaser and returned to CYRUS or its Distributor within 8 days
of purchase. No Dealer or Distributor may vary the terms of this
warranty which is personal to the original Purchaser and is not
transferable.
Please retain the sales receipt as proof of purchase.
Warranty claims must wherever possible be made through the Dealer
from whom the equipment was purchased.
This warranty excludes:
Damage caused through neglect, accident, misuse, wear and
•
tear, or through incorrect installation, adjustment or repair by
unauthorised personnel. Any unauthorised servicing will result in
loss of guarantee.
Liability for damage or loss occurring in transit to or from the
•
purchaser.
Consequential damage, loss or injury, arising from or in
•
conjunction with this equipment.
Equipment for attention under warranty should be consigned return
carriage paid. If returned equipment is found to comply with the
published specification, CYRUS reserves the right to raise a charge.
The above conditions do not affect your statutory rights as a
consumer.
SPECIFICATIONS
Power Supply
Voltage:........................................................................... As plate on rear of unit
Power Consumption
Playing .........................................................................................................20W
Standby........................................................................................................ 10W
Safety Requirements ........................................................................... EN60065
Enclosure
Dimensions (WxHxD) ............................................................215 x 75 x 365mm
Weight........................................................................................................... 3Kg
Material .....................................................................................Die cast chassis
Analogue Audio Performance
Audio Output Level ...............................................................................2.1V rms
Output Impedance ......................................................................................47
Frequency Response......................................................................20-20,000Hz
Channel Separation ..................................................................>110dB @ 1kHz
SNR (using silent track) ....................................................................... >100dBA
THD @ -10dB .........................................................................................0.005%
Digital Audio Performance
PCM Output compatibility ..........................................................44.1kHz, 48kHz
...............PCM 24/96kHz (downsampled to 48kHz)
Surround output compatibility ................................................Dolby Digital, DTS
Output level............................................................................................. 0.5Vp-p
Output Impedance ......................................................................................75
Video Performance
Output formats .................................................RGB, S-Video (Y/C), Composite
Output level........................................................................................... 1V pk-pk
Output Impedance ......................................................................................75
>100dB@20kHz
Ω
Ω
Ω
GB
GB
Cyrus reserves the right to change all specifications without notice. E &OE
8
Loading...