Cyrus CM 5 User Manual
CM 5 - THE SOLID ONE
MANUAL PROFILE
Thank you for purchasing CM 5 mobile phone, a Series of Cyrus. This
mobile phone is designed for shockproof, waterproof and dustproof. This
instruction manual special used to guide you to understand the functions
and features of Series of Cyrus phone.
In addition to common call functions, CM 5 also provides you Messages,
MP3 player, Video player, EBook, and Bluetooth, etc. It will bring you more
convenience and pleasure for your work and life.
CM 5 provides including rechargeable batteries, charges and many kinds
of special accessories for your choosing to use. Unauthorized charger may
cause danger, and this would violate the recognition for this phone and
guarantee clauses.
Such as described in this manual is incompatible with your phone, please
refer to the mobile phone.
The manufacturer has the nal interpretation of this manual. The manufacturer reserves the right
to modify technical regulations without prior notice. The company reserves the right to modify the
contents of this manual without prior notice. The manufacturer reserves the right to modify the
technical product specications without prior notice.
COPYRIGHT STATEMENT
» Cyrus has the nal interpretation of this manual.
» Cyrus reserves the right to modify the technical product specications
without prior notice.
» Cyrus reserves the right to modify the contents of this manual without
prior notice.
» Without the prior written permission of Cyrus, it is strictly prohibited to
copy, use, published any content in this manual in any form.
» In any case, Cyrus disclaims responsible for any loss of data or income
which caused by mobile phone reasons.
EN
CONTENTS
1. Safty and Performance 03
2. Your CM 5 11
3. Preparing for Use 14
3.1 Install the SIM Card 14
3.2 Install the Memory Card (T-Flash Card) 15
3.3 USB Usage 15
3.4 Security Password Usage 15
3.4 Connect to the Network 18
3.5 Charge the Battery 18
3.6 On/Off the Phone 19
3.7 Headset 20
4. Basic Function 20
4.1 Dial Call 20
4.2 Adjust Volume 21
4.3 Answer the Incoming Call 21
4.4 Call Process 22
5. Main Menu 23
5.1 Call Center 23
5.1.1 Call Records 24
5.1. 2 Call Setting 25
5.2 Phonebook 27
5.3 File Management 30
5.4 Organizer 31
5.5 Message 33
5.6 Multimedia 38
5.7 Internet Service 42
5.8 Camera 43
5.9 Settings 44
6. Input Method 50
7. Appendix 51
Common Problems & Solutions 51
Term Explanation 53
01 02
1. SAFETY AND PERFORMANCE
EMERGENCY SERVICE
Dial the emergency call in any country, you can directly dial 112 (or other
emergency services call). You need to conrm the mobile power supply
has been opened, and in the service area. Enter the emergency services
number (112 or other numbers) and press dial key to call. Any digital
network has 112 emergency call services. In UK, you can also use 999
standby emergency number, but you must insert a valid SIM card.
Note: Due to the nature of cellular network, it can‘t guarantee the
emergency call can success.
PERSONAL
Interference might be caused by poor shielding performance of medical
devices such as hearing aids and heart pacemakers in the use of radio
frequency devices including mobile phones. Consult medical device ma-
nufacturer or your doctor before using mobile phone.
» Please turn off the phone in which place posted notice required to.
These places include hospitals and rest homes and other medical
establishments. Because these facilities may be using equipments
sensitive to external RF signal.
» If you are using personal medical devices, please consult the manu-
facturer of these devices, to conrm that they are adequately shiel-
ded from around the RF signal. You can also ask your doctor the
relevant information.
» For users with heart disease, you must pay special attention to phone
ring volume and vibrating alert Settings.
» In oil storages, chemical factories and so on, which have explosive
gases, or the location of explosive production process, we should pay
close attention to the RP devices use restrictions. In standby state,
your mobile phone sill launches the electromagnetic signal. If reques-
ted, you should turn off the phone.
» To pay attention to trafc safety. Do not use mobile phones while
driving. And to use, you should park your car rst.
» If your phone is lost or stolen, please immediately notify the telecom-
munications sector, in order to disable the SIM card. It will protect
you from the economic losses caused others to take the call.
» When you contact the telecommunications department or distributor,
they need to know your phone‘s IMEI number. It‘s printed on the
label on the back of the phone (or input „* # 06 #“ to check the IMEI
number). Please put the number down and keep, for the future needs.
» In order to make your mobile phone is not misused, please take pre-
ventive measures, such as: set up mobile phone SIM card PIN code
or personal security code, and modify in a timely manner when others
know.
» Do not remove the battery in standby state mode, it will result in the
loss of user data.
» When you leave your car, please do not put the phone on easy to be
seen. It is best to carry or locked in the trunk
» Do not let the children play with mobile phone, charger or battery.
03 04
MOBILE PHONE
Mobile phone contains sophisticated electronic circuitry, magnets and
battery systems, it should be handle with care. In particular, you should
pay attention to the following points:
» Your mobile phone will generate electromagnetic elds, please do
not place it with magnetic storage media, such as computer disk.
» Using mobile phone near the TV, telephone, radio and personal com-
puters and other electrical equipments may cause interference, thus
affecting the performance of the phone.
» Whenever, do not keep the mobile phone and its accessories come
into contact with the liquid or in a damp environment.
» Please do not put the mobile phone on the temperature is too high
or too low.
» Please do not place the mobile phone on re or near the lit cigarette.
» Please do not scribble on the mobile phone.
» Please do not place any objects within a slide phone.
» Please do not put the mobile phone and computer disks, credit cards,
travel cards or other magnetic objects together. Otherwise, the infor-
mation stored in the disk or credit card, may be affected by the mo-
bile phone.
» Please do not put the mobile phone or battery in the temperature
more than 60°C, such as car dashboard, windowsill, or direct sun-
light of glass windows, etc. Do not attempt to remove the mobile
phone or any other accessories.
» Can only use a damp or anti-static cloth to wipe the mobile phone.
Do not use dry cloth with static electricity to wipe the phone. Do not
use chemical reagents or abrasive cleanser, otherwise it may damage
the cabinet.
» The headset may be hot during normal using, and mobile phone may
be hot when charging.
» Please remember to recycle, the carton packing of this mobile phone
is well suited for recycling.
» Please do not keep the mobile phone not to install battery for a long
time or the battery power is empty, otherwise, some data may be lost.
» Mobile phone contains some metallic substances, it may let you pro-
duce allergic phenomenon, it depends on your body and health.
» If you turn on the vibration function, please keep the mobile phone
away from the heat source (such as radiator). And to avoid the phone
slipped from the desktop due to vibration.
» Please try to avoid scratch the touch screen. Do not use the common
pen or other sharp objects to write on the touch screen.
05 06
BATTERY
» Please do not short circuit battery equipment, it will damage the bat-
tery and generate heat, and may cause re.
» Banned to put the battery into re, lest cause an explosion. Used bat-
teries should be returned to the supplier, or put it in the designated
collection points, do not put in the household waste.
» Please do not use metal objects (such as coins or key ring) to contact
with the battery endpoint, and make the short circuit.
» Please do not remove the phone battery in the boot state.
» Please do not put the phone battery in the mouth, because after swal-
low, the electrolyte can lead to poisoning.
» The internal components of the mobile phone battery can only be
replaced by professional maintenance engineer. If you use wrong type
of battery may cause explosion. Be sure to deal with the used batteries
according to the manufacturer’s instructions.
» Use any non-phone manufacturer specify battery, charger, there will be
a potential danger, which caused by the damage to the mobile phone
out of warranty.
Note: If the battery is damaged, you should avoid touching the things
inside. If it contact with the skin, please use a lot of water to wash. In the
necessary circumstances, you should seek medical help.
ON THE ROAD
» Must always safety control the car. Please focus on driving.
» Please comply with all the requirements of the local trafc safety
regulations.
» Before dialing or receiving calls, you should pay close attention to
local legal system for mobile wireless phone using, and pay attention
in using.
» According to the requirements of driving conditions, please stop the
car, and then dial or receive the call.
» Unless in case of emergency, banned to stop at the isolation pier
place in the highway to receive or dial a call.
» Airbag ination aroused the strong force, please don‘t install or place
the wireless communication equipment above the airbag, or the area
that the airbag launch can touch. If the on-board wireless communi-
cation equipment is not properly installed, once the airbag ination,
it will cause serious damage.
» Please turn off your mobile phone when refueling, the same situation
applies to ban the use of a two-way radio equipment. Please do
not take any hazardous material which is inammable, explosive
with mobile phone together or handling, the internal spark may cau-
se burns.
The electronic system of the car, such as locked braking, speed control
and fuel injection systems, generally, they do not suffer the effects of
the radio waves. The manufacturers of such kind of equipment will tell
whether these devices have a good shield function. If you suspect that
radio waves cause the car broke down, please contact your dealer. Do not
boot without qualied professional installer checks.
07 08
ON THE PLANE
Please turn off the phone while you are in the plane or near the plane.
It is illegal to use a mobile phone in the plane, it could have dangerous
aircraft operating, it may also disrupt mobile phone networks.
» In an emergency situation, should according to safety regulations,
and consent the crew’s permission to use the phone.
OTHER MANUFACTURERS’ EQUIPMENTS
Use unauthorized equipments, cables or accessories of other manufactu-
rers may lead to the phone’s warranty failure, and it will also affect the
normal use of the mobile phones. Please be sure to use the rationing
cable.
MAINTENANCE SERVICE
No user-serviceable parts inside of the mobile phone, battery and charger.
Recommend to send your phone to designated repair facility for service.
NON-IONIC RADIATION
Radio equipment should be connected to the antenna by non-radiating
cables, such as coaxial cable. Antenna should not device in close to hu-
man body, unless both have metal shield, such as metal roof. You can
only use the antenna specically design for the mobile phone. Use of un-
authorized antennas, unauthorized alterations or additions may damage
the phone or in violation of the relevant provisions, resulting in reduced
performance or cause the radiation level does not meet the standard.
EFFECTIVE USE
Please note that the following provisions in order to get the best per-
formance with minimum power consumption: In communication, do not
hand cover the built-in antenna place, otherwise it may affect call quality,
and led to the phone to beyond normal level of output, shorten the bat-
tery call time and standby time.
RADIO FREQUENCY ENERGY
Your mobile phone is a low power radio transmitter and receiver. Once
the boot, it will periodically receive and send radio signal. Network sys-
tem will control the transmitted power of the mobile phone.
09 10
2. YOUR CM 5
PHONE LAYOUT
NR. KEY NOTE FUNCTION DESCRIPTION
1 OK Key Conrm Key
2 Left Key Press to enter to main menu in
standby mode, items operating fun-
ctions or conrming functions.
Long g press Left Key to turn on/off
the ashlight.
3 Right Key Enter to phonebook in standby
mode. Press this key in menu to re-
turn to previous page, and cancel.
4 Shortcuts Inbox Press to quickly enter the message
inbox.
5 Shortcuts Camera Press to quickly enter the Camera.
6 Dial Key Press to enter the call re-
cords. Input the number in standby
mode, and press this key to dial.
7 End Key Long press to power on or off this
phone. Terminate a call or refused a
call. Return to standby state.
8 Number Key Input numbers or characters
9 USB Port USB Port
10 Earphone jack Earphone jack
11 12
11/ Lautstärke-Taste Drücken, um die Lautstärke Ihres
12 Telefons einzustellen.
13 LED-Flashlight LED-Flashlight
14 Receiver Receiver
15 Viewnder Viewnder
16 Loudspeaker Loudspeaker
NR. TASTENBEZEICHNUNG BESCHREIBUNG DER FUNKTION
IHRE CM 5 SYMBOLE
Charger usage instruction: The charger connection interface end insert
the mobile phone charging jack, when the battery icon ashes that the
phone has been achieved for the charging.
13 14
3. PREPARING FOR USE
3.1 INSTALL SIM CARD
The SIM card contains your private information, there is your phone
number, PIN (personal identication code), PIN2, PUK (PIN unlock code),
PUK2 (PIN2 unlock code) and the IMSI (International Mobile Subscriber
Identity) number and network information, phonebook data and short
message data, etc.
» The SIM card slot is located inside the phone, when installation, open
the back cover , take out the battery and turn the phone to back, nd
the SIM card slot position.
» Put the SIM card metal face down, gently insert to the card slot, and
xed it; you must turn the phone off rst, open the phone back cover,
then take out SIM card.
» Open the back cover to take out the battery, insert SIM card to the
SIM card slot.
» Please carefully operate SIM card, friction or bend easily damaged
SIM card.
» Please pay attention to save the mobile phone and its accessories
such as the SIM card small parts, and placed out of the reach of
children.
Vertical bars indicate the signal strength of the GSM network signal.
four bars indicate that your current position has the best reception.
Indicates your phone is locked.
Indicates music playing
Indicates the alarm clock is set
Headset-Mode
Connected network service
New missed call
New SMS
New MMS
Ring Mode
Mute Mode
New Multi Message
Call Transfer
Bluetooth
Battery Icon
3.2 INSTALL MEMORY CARD (T-FLASH CARD)
It is located in the phone‘s internal and it is a pluggable mobile memory
card. When the phone is enable USB memory function and computer
connected, transmission of the data les from the computer to mobile
phone can be stored in T - FLASH card.
INSTALL METHOD
Turn off the phone, open the back cover and other external power supply,
turn the phone to the back to nd the location of the memory card slot.
Put the memory card metal face down, gently insert to the card slot, and
xed it; you must turn the phone off rst, open the phone back cover, then
take out the memory card.
Note: Because of the phone memory is lesser, in the need to use the
storage function, please try to store les in the memory card, so as not to
affect the use of your phone.
3.3 USB USAGE
This mobile phone supports USB1.0 port. You can connect the phone to
the computer through USB cable to copy\move les and some other ope-
rations. You can also browse the photos\sound records\video, etc through
the computer which saved on the phone. Using USB cable: Insert one side
of USB cable to USB interface on the PC, and connect the other side to the
“USB/Charging interface” on the left of phone.
3.4 SECURITY PASSWORD USAGE
Your mobile phone and SIM card has a variety of passwords. These pass-
15 16
words can help prevent unauthorized use of your mobile phone and SIM
cards. When requested for any of the code explained below, key in the
appropriate code and press the OK key. If the input error, press the „Clear“
key to delete the incorrect input, and then enter the correct number. You
can use menu “Settings -> Security Settings -> Change Password” to
modify PIN Code, PIN2 Code and Phone Password.
PHONE PASSWORD
The phone password helps you to protect the phone against unauthorized
use. The phone password is usually provided by the manufacturer with
the phone. Manufacturer preset phone password is „0000“. If the mobile
phone has been locked, you will be required to enter the phone password
when boot.
PIN CODE
PIN Code (Personal Identication Code, 4-8digits) protects your SIM card
against unauthorized use. The PIN comes with the SIM card. If you start
the PIN check function, then you will be required to input PIN code each
boot. If you enter an incorrect PIN three times in succession, the SIM card
will be locked, the unlock method is as follows:
» According to the screen prompt to enter the correct PUK code, then
unlock the SIM card.
» Enter the new PIN code and press “OK Key”.
» Prompted to re-enter the new PIN code, re-enter the new PIN code
and press „OK Key“
» PUK code is correct, then unlock the SIM card, and the PIN code is
reset.
Loading...