Cypress Semiconductor S6SBP401AJ0SA1001, S6SBP401AM2SA100 Operation Manual

Automotive

Evaluation Board Operation Guide

S6SBP401AJ0SA1001, S6SBP401AM2SA100

Doc. No. 002-08764 Rev. *A

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

http://www.cypress.com

Copyrights

Copyrights

© Cypress Semiconductor Corporation, 2015-2016. The information contained herein is subject to change without notice.
Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a
Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor
intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express
written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life­support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The
inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use
and in doing so indemnifies Cypress against all charges.

Trademarks

All other trademarks or registered trademarks referenced herein are property of the respective corporations.

Source Code

Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by
and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty
provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create
derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom
software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as
specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source
Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer

CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described
herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein.
Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure
may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support
systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all
charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 2

Preface

This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For
this product, please consult with sales representatives or support representatives.

Handling and Use

Handling and use of this product and notes regarding its safe use are described in the manuals.
Follow the instructions in the manuals to use this product.
Keep this manual at hand so that you can refer to it anytime during use of this product.

Notice on this Document

All information included in this document is current as of the date it is issued. Such information is subject to
change without any prior notice.

Please confirm the latest relevant information with the sales representatives
.

S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 3

Cautions

WARNING

Indicates a potentially hazardous situation which could result in death or serious injury and/or a
fault in the user’s system if the product is not used correctly.

Electric Shock,

Damage

Before performing any operation described in this manual, turn off all the power supplies to the
system.

Performing such an operation with the power on may cause an electric shock or device fault.

Electric Shock,

Damage

Once the product has been turned on, do not touch any metal part of it.
Doing so may cause an electric shock or device fault.

CAUTION

Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this
product or devices connected to it, or may cause to lose software resources and other properties
such as data, if the device is not used appropriately.

Cuts, Damage

Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch
your step when carrying the product. Do not use the product in an unstable location such as a
place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall,
resulting in an injury or fault.

Cuts

The product contains sharp edges that are left unavoidably exposed, such as jumper plugs.
Handle the product with due care not to get injured with such pointed parts.

Damage

Do not place anything on the product or expose the product to physical shocks. Do not carry the
product after the power has been turned on.

Doing so may cause a malfunction due to overloading or shock.

Damage

Since the product contains many electronic components, keep it away from direct sunlight, high
temperature, and high humidity to prevent condensation. Do not use or store the product where it
is exposed to much dust or a strong magnetic or electric field for an extended period of time.
Inappropriate operating or storage environments may cause a fault.

Damage

Use the product within the ranges given in the specifications.
Operation over the specified ranges may cause a fault.

Damage

To prevent electrostatic breakdown, do not let your finger or other object come into contact with the
metal parts of any of the connectors. Before handling the product, touch a metal object (such as a
door knob) to discharge any static electricity from your body.

Caution of the Products Described in this Document

The following precautions apply to the product described in this manual.

S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 4

Cautions

Damage

When turning the power on or off, follow the relevant procedure as described in this document.
Before turning the power on, in particular, be sure to finish making all the required connections.
Furthermore, be sure to configure and use the product by following the instructions given in this
document. Using the product incorrectly or inappropriately may cause a fault.

Damage

Always turn the power off before connecting or disconnecting any cables from the product. When
unplugging a cable, unplug the cable by holding the connector part without pulling on the cable
itself. Pulling the cable itself or bending it may expose or disconnect the cable core, resulting in a
fault.

Damage

Because the product has no casing, it is recommended that it be stored in the original packaging.
Transporting the product may cause a damage or fault. Therefore, keep the packaging materials
and use them when re-shipping the product.

S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 5

Contents

1. Description ..................................................................................................................................................................... 7

2. Evaluation Board Specification .................................................................................................................................... 8

3. PIN Descriptions ............................................................................................................................................................ 9

3.1 Input/OutputDescriptions ....................................................................................................................................... 9

3.2 JumperDescriptions ............................................................................................................................................. 11

4. Setup ............................................................................................................................................................................. 12

4.1 Connecting .......................................................................................................................................................... 12

4.2 Verification ................................ ................................................................ ........................................................... 13

5. Layout ........................................................................................................................................................................... 14

5.1 Component Layout .............................................................................................................................................. 14

5.2 Wiring Layout ....................................................................................................................................................... 14

6. Circuit Schematic ........................................................................................................................................................ 16

7. Component List ........................................................................................................................................................... 17

8. Ordering Information ................................................................................................................................................... 19

Revision History ................................................................................................................................................................... 20

Document Revision History ........................................................................................................................................... 20

S6SBP401AJ0SA1001, S6SBP401AM2SA100 Automotive Evaluation Board Operation Guide, Doc. No. 002-08764 Rev. *A 6