CLUX-11SA
HDMI Audio Repeater
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VS1 03/04/13 First Release
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 2
6. Operation Controls and Functions ....... 3
6.1 Front Panel .........................................3
6.2 Rear Panel .........................................3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
9. Acronyms ............................................... 5
1. INTRODUCTION
This is the most advanced solution for HDMI to HDMI repeater with
Audio decoder. This is compatible with HDMI specications, a cutting
edge technology which denes to transfer Deep Color (12-bit/color)
video with a high bandwidth up to 225 MHz. The HDMI Distribution
Amplier also does signal amplication and equalization output that
can connected with other HDMI to HDMI units for repeater function.
The HDMI output supports digital audio formats LPCM 2CH to 7.1CH,
Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio. The
Optical output supports digital audio formats LPCM 2CH, Dolby Digital
2CH to 5.1CH, and DTS 2CH to 5.1CH. The multi-channel phone jack
outputs support analog audio from 2CH to 7.1CH converted from the
input LPCM signal.
2. APPLICATIONS
• De-embedded HDMI digital audio to optical digital or analog
outputs
• De-embed HDMI multi-channel audio for use with non-HDMI
equipped devices such as an AV Receiver
• Extend the operating distance of an HDMI connection
3. PACKAGE CONTENTS
• HDMI Audio Repeater
• 5 V/2.6 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source devices such as DVD or Blu-ray players with HDMI cables
and output displays such as HDTVs and monitors with HDMI ports.
1
5. FEATURES
• HDMI, HDCP 1.1 and DVI 1.0 compliant
• Supports digital video formats in Deep Color Mode from 25 MHz to
225 MHz for 36-bit (12-bit/color)
• Supports high denition input up to 1080p@60 Hz/24-bit, output
resolution follows input
• Supports HDMI signal amplication and equalization output for
repeater function
• Supports uncompressed digital LPCM 2/5.1/7.1 channels and
compressed digital Bitstream (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) through HDMI input and output ports
• Supports digital Dolby 2/5.1 and LPCM 2 channels output through
optical audio output port
• Supports LPCM 2/5.1/7.1 signal converted to analog signal and
output through multi-channel output ports
• Integrated HDCP encryption for transmitting protected audio and
video content
• Supports CEC bypass
• Supports HDMI cable distances up to 20 meters at 1080p (8-bit) and
15 meters at 1080p (12-bit) resolution for the input and 15 meters at
1080p (8-bit) or 10 meters at 1080p (12-bit) resolution for the output
2
6. OPERATION CONTROLS AND FUNCTIONS
1
2
3
4
1
2
3
6.1 Front Panel
DC 5V
POWER
CLUX-11SA
HDMI INPUT
HDMI LPCM 7.1 DECODER
BITSTREAM
LPCM
5.1/7.1CH
2CH
1 2 3 4
HDMI INPUT: Connect the HDMI input port to the HDMI output port
of your source equipment such as a DVD player or Set-top Box.
AUDIO Output Switch: Switch among Bitstream/LPCM 7.1/5.1 or
LPCM 2 channels.
Note: When switch to other audio mode, the display will disappear
for a few seconds. This is normal phenomenon for the system.
POWER LED: The LED will illuminate when the power is connected.
DC 5V: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
6.2 Rear Panel
FL/FR LFE/FC RL/RRRLC/RRC
OPTICAL OUTMULTI CHANNEL OUTHDMI OUT
1 2 3
HDMI OUT: Connect the HDMI output port to the HDMI input port of
your display or AV receiver.
MULTI CHANNEL OUT: Connect the audio channel output to the
input of your amplier equipment or surround sound speakers,
following below channel conguration.
- FL/FR: Front Left and Front Right
- LFE/FC: Low Frequency Effect and Front Center
- RL/RR: Rear Left and Rear Right
- RLC/RRC: Rear Left Center and Rear Right Center
OPTICAL OUT: Connect Optical output to the display audio input or
audio equipment.
3
7. CONNECTION DIAGRAM
DVD/Blu-ray Player
HDMI Input
Power
Supply
FRONT
REAR
HDMI
Output
CLUX-11SA
HDMI INPUT
HDMI LPCM 7.1 DECODER
FL/FRLFE/FCRL/RR RLC/RRC
LPCM
BITSTREAM
5.1/7.1CH
2CH
POWER
OPTICAL OUTMULTI CHANNEL OUTHDMI OUT
DC 5V
Optical Digital
Output
Multi-channel
Analog Output
TV/Monitor AV Receiver Active Speakers
4
8. SPECIFICATIONS
Input Port 1×HDMI
Output Ports 1×HDMI, 4×3.5 mm Mini-jack,
1×Optical
HDMI Audio Format LPCM 2/5.1/7.1 CH & Bitstream (Dolby
TrueHD, Dolby Digital Plus and DTS-HD
Master Audio)
Multi-channel Audio Format Analog audio of 2/5.1/7.1 channels
Optical Audio Format Dolby 2/5.1 CH & LPCM 2 CH
Power Supply 5 V/2.6 A DC (US/EU standards, CE/
FCC/UL certied)
Dimensions 100 mm (W)×147 mm (D)×25 mm (H)
Weight 300 g
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0 ˚C~40 ˚C / 32 ˚F ~ 104 ˚F
Storage temperature −20 ˚C~60 ˚C / −4 ˚F ~ 140 ˚F
Relative Humidity 20~90 % RH (no condensation)
Power Consumption 6 W
9. ACRONYMS
ACRONYM COMPLETE TERM
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital content protection
HDMI High-Denition Multimedia Interface
LPCM Linear pulse-code modulation
5
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
MPM-CLUX11SA
Loading...