Cypress CV-401D User Manual

Download

CV-401D

DVI-D to Video Scan Converter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 25/04/11 Preliminary Release

VS1 11/10/12 Updated format/diagrams

CONTENTS

1. Introduction ............................................ 1

2. Applications ........................................... 1

3. Package Contents ................................ 1

4. System Requirements ............................ 1

5. Features .................................................. 2

6. Operation Controls and Functions ....... 3

6.1 Top Panel ..........................................3

6.2 Left Panel ..........................................4

6.3 Right Panel ........................................4

6.3 OSD Menu .........................................5

6.4 Supported Input Timing ...................7

7. Connection Diagram ............................ 8

8. Specications ........................................ 9

9. Acronyms ............................................. 10

1. INTRODUCTION

The DVI to Video Scan Converter is designed to convert the digital video signal from DVI-D sources to analog composite (CVBS) signal (NTSC or PAL). It is HDMI and DVI compliant and has many great features such like 3D noise reduction, frame rate conversion, adaptive contrast enhancement and many more. It also has a simple on-screen display (OSD) menu that allows the user to access the display status including input/output information.

2. APPLICATIONS

• Convert DVI-D signal to Composite (CVBS) signal

• Display graphics card signal on CRT monitor

• Display PC signal to LCD display

3. PACKAGE CONTENTS

• DVI-D to Video Scan Converter

• Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipment such as a PC/Notebook with DVI cable and output display (TV) with CVBS input port and cable.

5. FEATURES

• DVI 1.0 compliant

• Converts video signal from DVI-D source to NTSC/PAL composite

(CVBS) signal

• Accepts a wide range of input resolutions of 480p to 1080p@60 Hz

(DVI-D) and VGA to WUXGA@60 Hz (PC)

• 3D noise reduction in both the temporal and spatial domain

• Frame rate conversion

• Adaptive contrast enhancement

• OSD Display

• Overscan and underscan adjustment

• Phase and Aspect adjustment

• No software installation required

• Compact and elegant design

Note: The converter does NOT support HDCP. If any HDCP-encrypted

content is played, there will no any video output.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Top Panel

1 2

NTSC/PAL MENU (Hold): Press this button to bring up the On-Screen

Display (OSD) which will display the input timing and the output TV format information.

When the OSD is displayed, press the button again to switch the

output TV system from NTSC to PAL or from PAL to NTSC.

Press and hold this button for 3 seconds the OSD will bring up the

selection menu. Press it sequentially to select the required setting.

POWER LED: This LED will illuminate in RED when the unit is

connected to the power supply.

6.2 Left Panel

DVI-D IN: Connect to the DVI equipped source equipment such as a PC or notebook for DVI input signal with a DVI

cable.

6.3 Right Panel

CV OUT: Connect to the output display TV or monitor with RCA

cable for display of the converted composite (CVBS) signal.

DV5V: Plug the 5 V DC power supply included in the package into

the unit and connect the adaptor to an AC wall outlet.

6.3 OSD Menu

IN 1280×960 @60 (Input Timing)

OUT NTSC (Output TV System)

NTSC Press and hold the MENU

PAL

Underscan 1

Underscan 2

Overscan

Full Screen

Letterbox

Aspect Adj

Below is the example of the scan selection result.

Pan & Scan

Auto TV 4:3

Auto TV 16:9

Press the Menu button once to bring up the OSD and display the input (IN) and Output (OUT) information.

button for 3 seconds to

bring up the OSD then press

it repeatedly to move the

OSD cursor to the desired

selection. Once the selection

is made, if the MENU

button is not pressed for a

few seconds, the OSD will

disappear and the display

will output following the

selected parameters.

4:3

Source TV Underscan1 Underscan2 Overscan

Aspect Adjustment: There are total of 5 different aspect ratio

adjustments: Full Screen, Letterbox, Pan & Scan and Auto TV 4:3 &

Auto TV 16:9.

Full Screen: To allow the image to ll the screen of the TV.

Letterbox: To t a 16:9 formatted video signal on a 4:3 display.

Horizontal Black bars will be displayed above and below the image

Pan & Scan: To t a 4:3 formatted video signal on a 16:9 display.

Vertical black bars will be displayed at both sides of the the image.

Auto TV 4:3: The device will detect the input source aspect ratio of 4:3 or 16:9 and make the automatically make the adjustment to 4:3.

Auto TV 16:9: The device will detect the input source aspect ratio of 16:9 or 4:3 and automatically make the adjustment to 16:9.

Blow is the sample chart of the selection result:

Source TV Aspect

Adjust

4:3

16:9

4:3

16:9

Full

Screen

Letterbox Pan&Scan Auto TV

4:3

× × ×

× ×

× × ×

Auto TV

16:9

6.4 Supported Input Timing

480p 60

576p 50

HD Timing

PC Timing

720p 50/60

1080i 50/60

1080p 50/60

640×480 60/72/75/85

720×400 70

800×600 56/60/72/75/85

1024×768 60/70/75/85

1152×864 70/75/85

1280×720 60

1280×768

1280×800

1280×960 60

1280×1024 60

1366×768

1400×1050

1440×900

1600×1200 60

1680×1050

1920×1200 60 (RB)

60/60 (RB)

Note: If the input resolution is not supported, the OSD will show 'IN Not Support'.

7. CONNECTION DIAGRAM

DVI-D Cable

DVI Equipped

PC or Notebook

Power

Supply

CVBS (Composite) Cable

8. SPECIFICATIONS

Input Port 1×DVI-D

Output Ports 1×CVBS

Output Video NTSC/PAL

ESD Protection Human body model:

±8 kV (air-gap discharge)

±6 kV (contact discharge)

Power Supply 5 V DC/1 A linear power adaptor (US/EU

standards, CE/FCC/UL certied)

Dimensions 64 mm (W)×104 mm (D)×26 mm (H)

Weight 120 g

Chassis Material Plastic

Silkscreen Color White

Operating Temperature 0 °C~40 °C/32 °F~104 °F

Storage Temperature −20 °C~60 °C/−4 °F~140 °F

Power Consumption 3 W

Relative Humidity 20~90 % RH (non-condensing)

9. ACRONYMS

ACRONYM COMPLETE TERM

CRT Cathode Ray Tube

HDMI

LCD Liquid Crystal Display

NTSC National Television System Committee

PAL Phase Alternating Line

High-Denition Multimedia Interface

CYPRESS TECHNOLOGY CO., LTD

Home page: http://www.cypress.com.tw

Cypress CV-401D User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual