Cypress DCT-18 Operation Manual

Download

DCT-18

L/R In-Out Lip SYNC

Corrector

Operation Manual

DCT-18

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from Cypress Technology.

Trademark Acknowledgments

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:



Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.



To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.



Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.



Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.



To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change VS1 20101125 Preliminary Release VR2 20110119 5.1 Audio Specication

Table of Contents

1. Introduction..................................................................................1

2. Applications................................................................................. 1

3. PackageContents......................................................................1

4. Features........................................................................................1

5. Specifications..............................................................................2

6.1 Input Audio Reference Level ......................................... 2

6. OperationControlsandFunctions............................................. 3

6.1 Top Panel ...................................................................... 3

6.2 Left Panel ...................................................................... 3

6.3 Right Panel .................................................................... 3

6.4 Front Panel .................................................................... 4

6.5 Rear Panel .................................................................... 4

7. ConnectionandInstallation...................................................... 5

8. Acronym.......................................................................................6

1. Introduction

The L/R In-Out Lip SYNC Corrector is a compact device that corrects audio delays between audio and video. When distributing video over long distances through multiple devices like distribution ampliers and set top boxes there can sometimes be a noticeable delay which results in audio being played before the video. This gadget lets you manually adjust the audio delay from 0 ~300 ms so you can perfectly synchronize your audio and video, so when it reaches the display your media is synched and ready to go. The Lip SYNC Corrector is an affordable and compact device that when placed beside your display greatly enhances your home audio experience.

2. Applications

• Home Theater

• Cable TV

• Set-Top-Box

• Showroom display

3. Package Contents

• Lip SYNC Corrector

• 5V / 1A Power Adaptor

• Operation Manual

4. Features

• Sample Rates 48 kHz

• Analog to analog signal bypass

• Low power consumption

• Up to 24 bit resolution

5. Specications

Input Port 1 x L/R Sample Frequency 48 kHz Output Port 1 x L/R Input Impedance 44K Ω Output Impedance 1k Ω Power Supply 5V / 1A DC ( US/EU standards, CE/FCC/UL certied) ESD Protection Human body model: ± 8kV (air-gap discharge) ± 6kV (contact discharge) Dimensions(mm) 42 (W) x 40.5 (D) x 22(H) Weight(g) 32 Chassis Material Plastic Silkscreen Color White Operating Temperature 0ºC~40ºC / 32ºF~104ºF Storage Temperature -20ºC~60ºC / -4ºF~140ºF Power Consumption 0.5 W Relative Humidity 20 ~ 90% RH (non-condensing)

5.1InputAudioReferenceLevel

Input Level

Output Level

THD+N

Frequence Response

SNR Crosstalk

2 Vrms 2.0 Vrms <0.01%

±0.5dB 20Hz~20KHz

>80dB <-70dB

6. Operation Controls and Functions

6.1TopPanel

① POWER LED: The LED will turn blue when the power is connected.

6.2LeftPanel

① L/R IN: These jacks are to connect with input sources such as DVD/Blu- Ray players using stereo cables in order to receive an audio signal.

6.3RightPanel

① L/R OUT: These jacks are where you connect an output stereo cable to an amplier, speaker or TV so you can output audio.

6.4FrontPanel

① Lip SYNC switch: This switch has eight settings that allow users to set the audio output delay from 0~300 milliseconds in order to have perfectly synched audio and video.

6.5RearPanel

① DC 5V: This slot is where you plug the 5V DC power supply into the unit and

connect the adaptor to an AC outlet.