Cypress CY8CKIT-042 Quick Start Manual
CY8CKIT-042 QUICK START GUIDE
Download and Install the latest kit software and examples from
www.cypress.com/go/CY8CKIT-042
Connect the board to
your computer using
the provided USB cable
Blue LED Blinks
Design with PSoC® CreatorTM
PSOC® 4 PIONEER KIT
1
3
4
2
© 2013 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the properties of their respective owners.
Doc.#: 001-86373 Rev.*B
CY8CKIT-042
QUICK START GUIDE
For the latest information about this Kit and to download Kit Software and Hardware les,
visit http://www.cypress.com/go/CY8CKIT-042
PSOC® 4 PIONEER KIT
P4_0/SCL
P4_1/SDA
P1_7/AREF
GND/GND
P0_6/D13
P3_1/D12
P3_0/D11
P3_4/D10
P3_6/D9
P2_6/D8
P2_7/D7
P1_0/D6
P3_5/D5
P0_0/D4
P3_7/D3
P0_7/D2
P0_5/D1
P0_4/D0
VCC/P4_VDD
GND/GND
SCK/P0_6
MISO/P3_1
MOSI/P3_0
SS/P3_5
NC
IOREF/P4_VDD
RESET/RESET
3.3V/V3.3_EXT
5V/VBUS
GND/GND
GND/GND
Vin/VIN
A0/P2_0
A1/P2_1
A2/P2_2
A3/P2_3
A4/P2_4
A5/P2_5
P0_0
P0_1
P1_0
P3_0
P12_7
P5_VDD
P0_0
P3_4
P3_6
P12_6
GND
P3_7
P3_5
P0_1
P1_2
P0_2
P0_3
VDD
P1_5
P1_4
P1_3
GND
P1_2
P1_1
USB Connector (J10)
CapSense
®
Slider
RGB LED
PSoC 4 Power Supply
Jumper (J13)
PSoC 4 44 TQFP
Arduino
TM
Compatible
I/O Header (J3)
Arduino
TM
Compatible
I/O Header (J4)
PSoC 4 Reset Button
Power LED
System Power Supply Jumper (J9)
PSoC 5LP I/O Header (J8)
Digilent
®
Pmod
TM
Compatible I/O Header (J5)
PSoC 5LP Programmer
and Debugger
Arduino
TM
Compatible
I/O Header (J1)
Arduino
TM
Compatible
I/O Header (J2)
Push Button Switch
PSoC 4 External
Program Header (J6)
Status LED
Arduino UNO
PSoC 4 Pioneer Kit
Digilent Pmod
Loading...