Cypress CX-5100AH Operation Manual

Page 1
CX-5100AH
HDMI with Audio Amplier
Operation Manual
CX-5100AH
Page 2
Revision History
Revision Date Summary of Change
Precaution
Failure to follow the precautions described below may cause damage to
Digital HDMI AV Receiver and void the warranty.
DO NOT open the case. Doing so will void the warranty. If you nd
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
DO NOT use third-Party AC adapter or power cord. Doing so may
damage Digital HDMI AV Receiver.
DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
DO NOT set any liquids or beverages on the case as they may
damage Digital HDMI AV Receiver.
Page 3
Table of Contents
1
1
1
2
2
3
4
5
6
6
7
8
8
9
11
1. Introduction …………………………………………................................
2. Application.............................……………………………………………
3. Contents .............................……………………………………………….
4. System Require ............................………………………………………..
5. Features .............................………………………………………………..
6. Installation ............................……………………………………………..
7. Front View .............................……………………………………………..
8. Remote Control........................... ………………………………………..
9. LCM Operation .............................……………………………………….
9.1 LCM Menu 1....................................................................................
9.2 LCM Menu 2....................................................................................
9.3 LCM Operation Table
....................................................................
10. Audio Input & Output Diagrm.............................................................
11. Audio Output Format Table................................................................
12. Specication........................................................................................
Page 4
1. Introduction
Thank you for purchasing Digital HDMI AV Receiver with Audio Amplier. When HDMI products ll out the market speedily, many follow devices are still yet catching up. How to enjoy a full HDMI solution with limited cost and space is the most urgent request now in the market. How to display a total solution HDMI AV on your HDMI TV that is with limited HDMI sound solution is the key to enjoy your true HDMI AV.
Digital HDMI AV Receiver is the most advanced solution for HDMI Audio Amplier. Digital HDMI AV Receiver supports not only 3 (three) HDMI input and 2 (two) HDMI output but also, Analog / Digital audio input/output. Digital HDMI AV Receiver allows you to enjoy theater standard sounds with less cost and space. Digital HDMI AV Receiver designs friendly use remote control with entry level set up for your enjoyment of free space entertainment environment. Digital HDMI AV Receiver makes your HDMI AV world ever the best.
Please follow this manual to begin enjoying the benet of your true HDMI AV. We suggest keeping it in a safe place for future reference.
2. Application
Home theater entertainment.
Bridge between your audio devices and video devices.
Enlarge sounds from stereo in TV to surround 5.1CH HDMI AV.
Transforms analog sounds into digital sounds.
Combination usage of Digital (Optical / Coaxial) & HDMI input Digital
(Optical / Coaxial) & HDMI output ports.
3. Contents
Digital HDMI AV Receiver
Power Adaptor
Power Cord
Remote Control RC36 (battery included)
User Manual
1
Page 5
4. System Requirements
Front LR/Rear LR/Center/Subwoofer speakers, Amplier, Optical / Coaxial cables, DVD player, HDMI/LCD TV and other audio equipment(s).
5. Features
Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specications.
Full HD 1080p supported.
Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480p to 1080p. Maximum resolution bandwidth is 165MHz.
Built-in HDMI EDID simulator and HDCP keyset allows each output to work
independently in connecting to a HDMI display.
7 Digital (Optical / Coaxial) input port and 4 Digital (Optical / Coaxial)
output port.
Lip Sync delay (up to 480ms can be split up to 3 channels).
8Ω speaker will produce sounds up to 9Wx 6 / 54W.
Easy to install and simple to operate.
Elegant design with thermal dispensation.
2
Page 6
L/Lt
1 5.1CH AMP out: Connect the Front LR /Rear LR /Center/Subwoofer to the
Amplier.
2 Optical 1~2 in: Connect the Optical input ports 1~2 to the Optical output
port of your source equipments.
3 Coaxial 1~2 in: Connect the Coaxial input ports 1~2 to the Coaxial output
port of your source equipments.
4 Optical out: Connect the Optical output port to the input port of your audio
equipment.
5 Coaxial out: Connect the Coaxial output port to the input port of your audio
equipment.
6 HDMI 1~3 in: Connect the HDMI 1 ~ 3 input ports to the HDMI output port of
your source equipments.
7 Analog audio in: There are four L/R input connectors; it can connect to four
different stereo audio sources.
8 HDMI out: Connect the HDMI 1 ~ 2 output ports to the HDMI input port of
your display or Amplier.
9 5.1 CH out: Connect the Front LR/Rear LR/Center/Subwoofer to Multi CH
input.
10 Power: Plug the 18VDC power supply into the unit and connect the adaptor
to AC wall outlet.
Note: a. A bitstream format sounds including AC-3 & DTS and others will not be
displayable hence, optical, coaxial & 6 RCA will output no sounds and the LCM will show NONPCM. Digital HDMI AV Receiver is not supporting bit steam sounds.
b. Coaxial / Optical / HDMI Audio Sample Rate: 48KHZ
6. Installation
Follow the step-by-step instruction below to install your Digital HDMI AV Receiver Get familiar with the housing and connections of your new Digital HDMI AV Receiver.
1 2 1 2
L
R
SUBREARFRONT4321
OPTICAL COAXIAL OPTICALCOAXIAL
1 21 2 3
HDMI INPUT HDMI OUT
DIGITAL
IN
DIGITAL
OUT
FRONT
R/Rt L R
CENTER
5.1CH AMP OUTPUT
REAR
ANALOG INPUT 5.1CH OUTPUT
SUBWOOFER
CENTER(TOTAL)
1 2 3 4 5
6
7
10
9
8
3
Page 7
7. Front View
Power
Home
Menu
Video InAudio In
-
+
VOLUME
1 2 3 4 5 6 7 8
1 Power indicator: When power on, the LED will indicate in Green color.
When power off, the LED will indicate in Red color. 2 Power switch: Turn the system ON/OFF. 3 IR sensor. 4 Home menu: Press the button to enter the LCM menu selection. For the
LCM menu selections please refer to “section 9 LCM Operation”. 5 Video in: Press [Video in ▲] switch between different input video sources
(HDMI 1, HDMI 2, HDMI 3). 6 Audio in: Press [Audio in ▼] switch between different input audio sources
(Optical 1, Optical 2, Coaxial 1, Coaxial 2, L/R 1, L/R 2, L/R 3, L/R 4,
HDMI_2ch or HDMI_Mch). By choosing HDMI_2ch & HDMI_Mch the output
source will depend on HDMI input 1~3 single input’s original signal only.
Please refer to “section 10 LCM Operation”. 7 Volume -/+: Press [-] / [+] to adjust the volume up/down. 8 LCM display.
4
Page 8
8. Remote Control
1. Power: Press to turn ON/OFF the system. When power on the LED will indicate in Green color, when power off the LED will indicate in Red color.
2. Mute: Press to mute the audio, press again to turn ON the audio.
3. HDMI in: Select the desire HDMI input source from 1~3.
4. Audio in: Select the desire audio input source
(OPT1, OPT2, COAX1, COAX2).
5. Analog audio in: Select the desire stereo analog input source from 1~4.
6. HDMI LPCM: <MULTI CH> for 5.1 CH output. <2CH> for 2CH L/R output.
7. -/+: Press [-] / [+] to adjust the volume, Press [-]: to decrease the volume, minimum level to +0 Press [+]: to increase the volume, maximum level to +64
8. Menu/▲/▼/←/→: Press to enter the LCM menu and sub-menu. From sub-menu press [▲/▼/←/→] to adjust Bass /Treble /Loudness /LipSync LR, C and default setting.
1
2
4
5
7
3
MUTEMUTE
CR-36
112233
OPT1OPT1 OPT2OPT2 COAX1COAX1 COAX2COAX2
1122
HDMI LPCMHDMI LPCM
2CH2CHMULT I CHMULT I CH
VOLUMEVOLUME
3344
ANALOG AUDIO INANALOG AUDIO IN
DIGITAL AUDIO INDIGITAL AUDIO IN
HDMI INHDMI IN
MENU
POWERPOWER
6
8
5
Page 9
9. LCM Operation
Start Menu Display
V:HDMI_1
A:Opt_1 L:16
1. Video input selection
HDMI 1 input HDMI 2 input HDMI 3 input
V:HDMI_1
A:Opt_1 L:+16
V:HDMI_2
A:Opt_1 L:+16
V:HDMI_3
A:Opt_1 L:+16
2. Audio input selection
Optical 1 input
Optical 2 input
V:HDMI_1
A:Opt_2 L:+16
Coaxial 1 input
V:HDMI_1
A:Opt_1 L:+16
V:HDMI_1
A:Coax_1 L:+16
Coaxial 2 input
V:HDMI_1
A:Coax_2 L:+16
L/R 1 input
V:HDMI_1
A:LR_1 L:+16
L/R 2 input
V:HDMI_1
A:LR_2 L:+16
L/R 3 input
V:HDMI_1
A:LR_3 L:+16
L/R 4 input
V:HDMI_1
A:Opt_1 L:+16
HDMI input
V:HDMI_1
A:HDMI L:+16
3. Volume Adjustment
V:HDMI_1
A:Opt_1 L:+00
V:HDMI_1
A:Opt_1 L:+64
Default +16
4. Bass Adjustment
Bass -12
>Press MENU Exit
Bass +12
>Press MENU Exit
Default +00
5. Treble Adjustment
Treble -12
>Press MENU Exit
Treble +12
>Press MENU Exit
Default +00
6. Loudness Adjustment
Loudness +00
>Press MENU Exit
Loudness +16
>Press MENU Exit
Default +00
7. LipSync LR
LipSync LR +00
>Press MENU Exit
LipSync LR +16
>Press MENU Exit
Default +00
8. LipSync Center
LipSync C +00
>Press MENU Exit
LipSync C +16
>Press MENU Exit
Default +00
Main menu
( Manual )
Wait...
( Manual )
Load Default
Wait…
9. Factory setting
Factory Setting - OFF Factory Setting - ON
Default Off
>Press MENU Exit
Default On
>Press MENU Exit
Default +00
Operation instruction: ↓↑ Press ↓↑to move the cursor.
←→ Press ←→to move the cursor or adjust the value.
MENUSwitch between Main Manual or Sub-Manual or Confirm the selection.
9.1 LCM Menu
6
Page 10
0 1 2 3 4 5 6 7 8 9 A B C D E F
Main MenuVideo In
V : H D M I
έ
1
A : O p t _ 1 L :
Ѐ 1 6
Audio In
V : H D M I
έ
1
A : O p t
έ
1 L :
Ѐ 1 6
Volume
V : H D M I
έ
1
A : O p t
έ
1 L :
Ѐ 1 6
0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F
Sub Menu Bass
B a s s
Ё 1 2
B a s s
Ѐ 1 2
υ
P r e s s M E N U E x i t
υ
P
r e s s M E N U E x i t
Treble
T r e b l e
Ё 1 2
T r e b l e
Ѐ 1 2
υ
P r e s s M E N U E x i t
υ
P r e s s M E N U E x i t
Loudness
L o u d n e s s
Ѐ 0 0
L o u d n e s s
Ѐ 1 6
υ
P r e s s M E N U E x i t
υ
P r e s s M E N U E x i t
LipSync LR
L i p S y n c L R
Ѐ 0 0
L i p S y n c L R
Ѐ 1 6
υ
P r e s s M E N U E
x i t
υ
P r e s s M E N U E x i t
LipSync C
L i p S y n c C
Ѐ 0 0
L i p S y n c C
Ѐ 1 6
υ
P r e s s M E N U E x i t
υ
P r e s s M E N U E x i t
Default
D e f a u l t O f f D e f a u l t O n
υ
P r e s s M E N U E x i t
υ
P r e s s M E N U E x i t
Wait
L o a d D e f a u l t
W a i t . . .
9.2 LCM Menu 1
7
Page 11
Function Level Suggestion level
Bass -6 ~ +6 0 Treble -6 ~ +6 0 Loudness -6 ~ +6 0 LipSync LR 0 ~ 16 0 LipSync C 0 ~ 16 0 Default Off/On off
LipSync can delay120ms +/- 5% for each mono channel.
10. Audio input & output diagram
9.3 LCM Operation table
8
Page 12
11. Audio output format table
Output Jacker & Format
HDMI_1
Out
HDMI_2
Out
OPT Out COAX Out
6 RCA
Line Out
Input Jacker & Format
PCM
5.1 CH
HDMI_1 InPCM 5.1 CHPCM 5.1 CHPCM 2 CH
(Downmix)
PCM 2 CH (Downmix)
Real 5.1 CH
HDMI_2 InPCM 5.1 CHPCM 5.1 CHPCM 2 CH
(Downmix)
PCM 2 CH (Downmix)
Real 5.1 CH
HDMI_3 InPCM 5.1 CHPCM 5.1 CHPCM 2 CH
(Downmix)
PCM 2 CH (Downmix)
Real 5.1 CH
PCM 2
CH
HDMI_1
In
PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH
Virtual 5.1 CH
HDMI_2
In
PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH
Virtual 5.1 CH
HDMI_3
In
PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH
Virtual 5.1 CH
9
Page 13
Input Jacker & Format 
PCM 2 CH
OPT_1 In
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
OPT_2 In
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
COAX_1
In
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
COAX_2
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
Line
2 CH
RCA
Line_1 In
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
RCA
Line_2 In
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
RCA
Line_3 In
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
RCA
Line_4 In
PCM 2 CH / 5.1 CH (Audio from HDMI In)
PCM 2 CH / 5.1 CH
PCM 2 CH PCM 2 CH
Virtual 5.1 CH
Note: 1. 6 ports of RCA output only support 5.1 Channels.
2. This system can’t support compress audio input (AC3 or DTS), if the audio sources are contain compress audio the output from Optical, Coaxial, 6 RCA and 5.1 CH amplier are soundless, this is normal phe­nomena.
10
Page 14
Video Input Ports 3 x HDMI
Digital Audio Input Ports 2 x Coaxial, 2 x Optical
Analog Audio Input Ports 4 x Audio R/L
Video Output Ports 2 x HDMI
HDMI Format V1.2
Support Resolution 480i/1080i, 1080p 50/60, 1080p 24, VGA/UXGA
HDMI Audio Format PCM2, PCM5.1, Dolby 5.1 (PS3 Setting)
HDMI Cable in/out 15/15M
Digital Audio Output ports 1 x Coaxial, 1 x Optical
Analog Audio Output ports 5.1 channels output clips
(8ohm trumpets, the output power is around 15Wx6/90W )
Coaxial Audio Format PCM2
Coaxial Audio Sampling 32, 44.1 and 48KHz
SPIDIF Audio Format PCM2
SPIDIF Audio Sampling 32, 44.1 and 48KHz
Amplier Output Format 5.1CH AMP output: PCM2, PCM5.1
5.1CH output: PCM2, PCM5.1
IR Distance Horizontally free space 7M , 30 degree left/right free
space 3M
Power Supply 18V/3.33A DC (US/EU standards, CE/FCC/ULcertied)
Dimensions (mm) 171(W) x 356(D) x 70(H)
Weight(g) 1764
Chassis Material Aluminum
Silk Skin Color Silver
Operating Temperature Operating from 0°C ~ 40°C
Power Consumption 60W (Max)
11. Specications
11
Page 15
12
Page 16
20080902 MPM-CX5100AH
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
Loading...