Cypress CV-401V Operation Manual

Download

CV-401V

PC/HD to CVBS Video

Scan Converter

Operation Manual

CV-401V

Draft Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from Cypress Technology.

Trademark Acknowledgments

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:



Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.



To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.



Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.



Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.



To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

20110318

Preliminary Release

Table of Contents

1. Introduction..................................................................................1

2. Applications................................................................................. 1

3. PackageContents......................................................................1

4. SystemRequirements..................................................................1

5. Features........................................................................................1

6. Specifications..............................................................................2

7. OperationControlsandFunctions............................................. 3

7.1 Top Panel ...................................................................... 3

7.2 Left Panel ...................................................................... 3

7.3 Right Panel .................................................................... 4

8. OSDMenu....................................................................................5

9. ConnectionandInstallation....................................................... 7

1. Introduction

The PC/HD to Video Scan Converter is designed to down scale PC/Component source to analog CVBS (NTSC,PAL) signal. Ideal for businesses with multiple CCTV cameras, this device takes your high-resolution camera footage and scales it to lower resolutions. Supporting PC resolution up to WUXGA@60hz, this scaler also helps connects new video sources to older displays. The device features many great functions such like 3D noise reduction, frame rate conversion, adaptive contrast enhancement… and etc. Further, a simplify OSD function is available allowing user with easy viewing on the displaying status.

2. Applications

• Security camera display

• Displaying PC signal on the CRT display

• Displaying PC signal on the LCD display

3. Package Contents

• PC/HD to Video Scan Converter

• Power Adaptor

• Operation Manual

4. System Requirements

Input source equipment such as PC/component camera (RGBHV/YPbPr) signal with D-Sub 15pin or component adaptor cable and output to TV with CVBS input jack and connection cable.

5. Features

• Converts video signal from PC/component source to NTSC or PAL signal

• Accepts a wide range of PC/VGA input resolution from 480i to 1080p@60Hz and PC from VGA to WUXGA@60RB

• Output picture size Underscan / Overscan

• 3D noise reduction in both temporal and spatial domain

• Frame rate conversion

• Adaptive contrast enhancement

• OSD Display

• Overscan and underscan adjustment

• Phase and Aspect adjustment

• No software installation require

• Compact and elegant design

6. Specications

Input Port 1 x VGA Output Ports 1 x CVBS Output Video NTSC/PAL ESD Protection Human body model: ± 8kV (air-gap discharge) ± 6kV(contact discharge) Dimensions (mm) 64 (W) x 104 (D) x 26 (H) Weight (g) 120 Chassis Material Plastic Silkscreen Color White Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Power Consumption 3W Relative Humidity 20 ~90%RH (non-condensing)

Support Input Timing

640x480 60,72,75,85 720x400 70(pc) 800x600 56,60,72,75,85 1024x768 60,70,75,85 1152x864 70,75,85 1280x720 59,60(pc) 1280x768 60RB,60 1280x800 60RB,60 1280x960 59(pc),60 1280x1024 59(pc),60 1366x768 60RB,60 1440x900 60RB,60 1600x1200 60 1680x1050 60RB,60 1920x1080 59(pc),60 1920x1200 60RB 480i 59 480p 59,60 576i 50 576p 50 720p 50,59,60 1080i 50,59,60 1080p 50,59,60

Note: When the input timing is not supported, the OSD will display “IN not Support”.

7. Operation Controls and Functions

7.1TopPanel

1 2

. NTSC/PAL MENU (3SEC): Press this button to bring up the OSD which will

display the input timing and output TV system information.

While the OSD is still displaying press the button again to switch output TV system from NTSC to PAL or from PAL to NTSC. Press this button for 3 second the OSD will bring up the selection menu. Press it sequentially to select the desire setting.

. Power LED: This LED will illuminate in RED when the power is connected

with the power supply.

7.2LeftPanel

. PC IN: This slot is to connect with source equipment such as PC, laptop or

digital camera with D-sub 15pin cable or adaptor converter cable for

input signal sending.

7.3RightPanel

1 2

. CV OUT: This slot is to connect with display TV or monitor with RCA cable

for output image display.

. DV5V: Plug the 5V DC power supply included in the package into the

unit and connect the adaptor to AC wall outlet.

8. OSD Menu

IN 640 x 480 (Input Timing) OUT NTSC (Output TV System)

NTSC PAL

Underscan 1

Underscan 2

Overscan

Phase adj 0~31

Aspect Adj

Full Screen

Letterbox

Pan & Scan

Auto TV 4:3

Auto TV 16:9

Below is the example of the scan selection result.

Phase Adjustment’s rang is from 0 ~ 31 and is for image blurry display and or jiggle character. Aspect Adjustment: There are total of 5 different adjustments under Aspect and they are Full Screen, Letterbox, Pan & Scan and Auto TV 4:3 & 16:9. Full Screen: To allow the image to ll out the screen of the TV. Letterbox: To t the output image closer to the input source, compressed the upper and lower image. Pan & Scan: To t the output image closer to the input source, compressed the right and left image. Auto TV 4:3: Allowing the device to auto detect input source signal of 4:3 or 16:9 and make the auto adjustment.

Auto TV 16:9: Allowing the device to auto detect input source signal of 16:9 or 4:3