CPRO-U2T
1 by 2 4K UHD HDMI Splitter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2016 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 16/08/16 Preliminary Release
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 2
6. Operation Controls and Functions ....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel .........................................4
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
8.1 Technical Specications .................5
8.2 Supported Resolutions .....................6
1. INTRODUCTION
This 1 by 2 4K UHD HDMI Splitter is an advanced solution for splitting
and distributing a single HDMI input to 2 HDMI outputs. It provides a
high level of audio and video performance with support for resolutions
up to 4K@60Hz (YUV4:2:0) resolution and high denition digital audio
formats such as LPCM 7.1CH with audio sampling rates up to 192kHz,
Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master
Audio. Additionally, the System Reset function allows the unit to
change the input selection on any connected, CEC enabled, TVs to
the input the unit is currently connected to automatically.
2. APPLICATIONS
• Classroom and Lecture Hall Presentations
• Showrooms and Demo Rooms
• Hotel Lobby information Displays
• Public Commercial Displays
3. PACKAGE CONTENTS
• 1 by 2 HDMI splitter
• 5V/1.2A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as media players, video game
consoles or set-top boxes.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of “Premium High Speed HDMI” cables id highly
recommended.
1
5. FEATURES
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 compliant
• 1 HDMI input and 2 HDMI outputs
• System reset function (CEC active source command)
• Simultaneous display of a single Ultra High-Denition source on up to
8 4K UHD TV displays
• 3D signal support(with 3D source and compatible 3D TV)
• Supports 4K UHD resolutions up to 4096x2160@60Hz(YUV4:2:0, 8 bit)
• Pass-through high denition audio: including LPCM up to 7.1, Dolby
Digital, DTS
• Pass-through of high denition audio including LPCM up to 7.1,
Dolby Digital, DTS, Dolby TrueHD, Dolby Atmos and DTS-HD Master
Audio
• EDID management control including Standard mode and TV mode
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER IN
OUT
12
EDID SYS-RST
STDTV
ON
SERVICE
OFF
1 2 3 4 5 6
1
POWER: This LED will illuminate to indicate the unit is on and
receiving power.
2
IN: This LED will illuminate to indicate that a live source has been
detected on the input port. When no source is detected theLED
will remain off.
3
OUT LEDs 1~2: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no
sink is detected the LED will remain off.
4
EDID: This switch controls the EDID management behavior of the
unit. When set to “TV” mode the unit will read and store the EDID
from the sink connected to output 1 and pass it to the connected
source. When set to “STD” mode the unit will use a built in EDID
dened as 1080p@60Hz, 8-bit, LPCM 2.0.
5
SYS-RST: Controls the CEC “active source” reset functionality of
the unit. When switched to the “ON” position the unit will send
a CEC active source reset command to all connected displays
every 8~10 minutes. This command requests that any connected
CEC compliant TVs switch to the input the unit is connected on.
(This function is ideal for TV displays where the public has access to
the controls and might switch the input away from the preferred
source)
6
SERVICE: This slot is reserved for rmware update use only.
3
6.2 Rear Panel
OUT
DC 5V
IN 12
1 2 3
1
DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
2
IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
3
OUT 1~2: Connect to HDMI TVs, monitors or ampliers for digital
video and audio output.
7. CONNECTION DIAGRAM
Blu-Ray/PS4 Player
HDMI IN
Power Supply
DC 5V
IN 12
OUT
6G HDMI TV/Display
Simultaneous HDMI OUT
Projector
4
8. SPECIFICATIONS
8.1 Technical Specications
Video Bandwidth 300MHz/9Gbps
Input Ports 1× HDMI
1× USB(Service)
Output Ports 2× HDMI
Supported Resolutions VGA~WUXGA
480i~1080p@60Hz
4K@24/25/30Hz (YUV4:4:4)
4K@50/60Hz (YUV4:2:0)
HDMI Cable I/O Distance* 5M (4K@60Hz, YUV4:2:0, 8-bit)
10M (1080p@60Hz, 8-bit)
Power Supply 5V/1.2A DC (US/EU standards, CE/FCC/
UL certied)
ESD Protection Human Body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
Chassis Material Metal
Silkscreen Color Black
Dimensions 161mm × 22mm × 68mm (W×H×D)
[Case Only]
161mm × 26mm × 76.5mm (W×H×D)
[All Inclusive]
Weight 306 g
Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (no condensation)
Power Consumption 1.21 W
5
8.2 Supported Resolutions
DVI and HDMI Supported Resolutions Input Output
640x480@60/72/75/85Hz
800x600@56/60/72/75/85Hz
1024x768@60/70/75/85Hz
1280x1024@60Hz
1366x768@60Hz
1600x1200@60Hz
1920x1080@60Hz
1920x1200@60Hz
1440x576i@50Hz
1440x480i@59.94/60Hz
720x480p@59.94/60Hz
720x576p@50Hz
1280x720p@50/59.94/60Hz
1920x1080i@50/59.94/60Hz
1920x1080p@23.97/24/25/29.97/30/50/59.94/60Hz
3840x2160@24/25/30Hz
3840x2160@50/60Hz (YUV4:2:0)
4096x2160@24/25/30Hz
4096x2160@50/60Hz (YUV4:2:0)
6
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
MPM-CPROU2T
Loading...