PC/HDTV Switcher
Operation Manual
4x1
CPCD-41AR
Installation and Connection
1. 4 x PC input, 1x PC output
RS-232
RS-232
2. 4 x HD input, 1x HD output
Command Code
"I" + "1"
"I" + "2"
"I" + "3"
"I" + "4"
"P" + "1"
"P" + "0"
POWER ON
POWER OFF
Comment
PORT 4 ON
CPCD-41AR RS-232 Remote Control Protocol
* The connection between CPCD-41AR and remote controller with RS-232 modem cable.
* RS-232 transmission format:
Baud Rate : 9600 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit
* Command :
PIN
Pins definition of modem cable
Applications:
Cypress CPCD-41AR PC/HDTV is perfect solution for
switching between various PC/HDTV sources such as PCs, DVD...
to share one display monitor, TV or projector with resolution up
to WUXGA/1080p.
Features:
- LED indicators
- IR remote control.
- Supports high resolution input:
PC:
VGA, SVGA, XGA, SXGA,UXGA(1600x 1200) and WUXGA(1920x1200),&
HDTV: 480i, 576i, 480p, 576p, 720p. 1080i and 1080p.
- Bandwidth: 650 MHz.
- Plug and play, easy to install and operate.
- Built-in advance circuit ensures a smooth transition when
switching from one PC/HD source into another.
- RS-232 interface allows control from a distant device.
- Ideal for presentation and large shop intergration.
- Audio format: L/R analog.
Package includes:
- CPCD-41AR unit.
- IR remote control
- 5VDC power supply, center +
- User manual
- A 3V lithium battery
- One set of 3.5mm phone jack to 2R audio cable.
1
Remote Control
1. Power: Switch between power ON and Standby.
2. Press button 1 to select source 1.
3. Press button 2 to select source 2.
4. Press button 3 to select source 3.
5. Press button 4 to select source 4.
Note: Replacement battery can be
found at a local electronic retail store.
Specifications:
Input
Output
PC /YPbPr
Bandwidth
Differential
gain
Differential
phase
Power
consumption
Power
Dimensions
Unit gross
Operation Controls and Functions
Front Panel
1 2 3
4 5 6 7
8 9
10 11
1. Power indicator LED.
2. Power ON/OFF switch: Push the button to turn ON/OFF the power.
3. IR sensor: Infrared remote control sensor.
4. Input 1 indicator LED .
5. Input 1 switch: Push the button, LED lights up, source 1 is selected.
6. Input 2 indicator LED.
7. Input 2 switch: Push the button, LED lights up, source 2 is selected.
8. Input 3 indicator LED .
9. Input 3 switch: Push the button, LED lights up, source 3 is selected.
10. Input 4 indicator LED.
11. Input 4 switch: Push the button, LED lights up, source 4 is selected.
Rear Panel
DC 5V
INPUT 1INPUT 2INPUT 3INPUT 4OUTPUT
AUDIO
PC 1/YPbPr 1PC 2/YPbPr 2PC 3/YPbPr 3PC 4/YPbPr 4PC/YPbPr
12345
INPUTOUTPUT
RS-232
POWER
1 2 3 4
INPUT
CPCD-41AR 4x1 PC/HDTV Switcher
1
2
3
456
7
89
101112
1. DC 5V: 5 Volt, 5W DC input , center +.
2. Input 1 connector: Input connector for PC 1/YPbPr 1.
3. Input 2 connector: Input connector for PC 2/YPbPr 2.
4. Input 3 connector: Input connector for PC 3/YPbPr 3.
5. Input 4 connector: Input connector for PC 4/YPbPr 4.
6. Output connector: Output connector for PC/YPbPr.
7. Audio input 1 connector: Audio input connector for
Audio (L+R) 1 via 3.5mm phone jack to 2R audio cable.
8. Audio Input 2 connector: Audio input connector for
Audio (L+R) 2 via 3.5mm phone jack to 2R audio cable.
9. Audio input 3 connector: Audio input connector for
Audio (L+ R) 3 via 3.5mm phone jack to 2R audio cable.
10. Audio input 4 connector: Audio input connector for
Audio (L+R) 4 via 3.5mm phone jack to 2R audio cable.
11. Audio output connector: Audio output connector for
Audio(L+R) via 3.5mm phone jack to 2R audio cable.
12. RS-232 interface: DB-9 female connector for connecting
to your other control console for remote control.
2 3
Remote Control
1
2
3
4
5
1. Power: Switch between power ON and Standby.
2. Press button 1 to select source 1.
3. Press button 2 to select source 2.
4. Press button 3 to select source 3.
5. Press button 4 to select source 4.
Note: Replacement battery can be
found at a local electronic retail store.
Pull out the tab to
activate battery
Specifications:
Input
Output
PC /YPbPr
Bandwidth
Differential
gain
Differential
phase
Power
consumption
Power
Dimensions
Unit gross
PC/YPbPr:4
PC/YPbPr:1
Analog Audio: 4 (L/R)
RGB: 0.7Vp-p or 1 Vp-p with sync75 ohm
/HD(TTL): 5Vp-p 10 K ohm
RGB: 0.7Vp-p or 1 Vp-p with sync 75 ohm
/HD(TTL): 5Vp-p 10k ohm
2Vrms max 47 k ohm
Analog Audio: 1 (L/R)
2 Vrms max 47 k ohm
650 MHz (-3db)
0.05%
0.05 degree
5 Watts (max.)
5V 1A AC adaptor
292(W)x 73(D) x 44(H)mm
1.5Kgs
Installation and Connection
1. 4 x PC input, 1x PC output
DC 5V
INPUT 1INPUT 2INPUT 3INPUT 4OUTPUT
AUDIO
PC 1/YPbPr 1PC 2/YPbPr 2PC 3/YPbPr 3PC 4/YPbPr 4PC/YPbPr
12345
INPUTOUTPUT
RS-232
PC input 1PC input 2PC input 3PC input 4
DC 5V
INPUT 1INPUT 2INPUT 3INPUT 4OUTPUT
AUDIO
PC 1/YPbPr 1PC 2/YPbPr 2PC 3/YPbPr 3PC 4/YPbPr 4PC/YPbPr
12345
INPUTOUTPUT
RS-232
HD input 1
HD input 2
HD input 3
HD input 4
LCD, Plasma,
or any display
with YPbPr
input
2. 4 x HD input, 1x HD output
Adaptor
Adaptor
Any PC display
4
Operation Controls and Functions
Front Panel
1. Power indicator LED.
2. Power ON/OFF switch: Push the button to turn ON/OFF the power.
3. IR sensor: Infrared remote control sensor.
4. Input 1 indicator LED .
5. Input 1 switch: Push the button, LED lights up, source 1 is selected.
6. Input 2 indicator LED.
7. Input 2 switch: Push the button, LED lights up, source 2 is selected.
8. Input 3 indicator LED .
9. Input 3 switch: Push the button, LED lights up, source 3 is selected.
10. Input 4 indicator LED.
11. Input 4 switch: Push the button, LED lights up, source 4 is selected.
Rear Panel
RS-232
CPCD-41AR 4x1 PC/HDTV Switcher
1. DC 5V: 5 Volt, 5W DC input , center +.
2. Input 1 connector: Input connector for PC 1/YPbPr 1.
3. Input 2 connector: Input connector for PC 2/YPbPr 2.
4. Input 3 connector: Input connector for PC 3/YPbPr 3.
5. Input 4 connector: Input connector for PC 4/YPbPr 4.
6. Output connector: Output connector for PC/YPbPr.
7. Audio input 1 connector: Audio input connector for
Audio (L+R) 1 via 3.5mm phone jack to 2R audio cable.
8. Audio Input 2 connector: Audio input connector for
Audio (L+R) 2 via 3.5mm phone jack to 2R audio cable.
9. Audio input 3 connector: Audio input connector for
Audio (L+ R) 3 via 3.5mm phone jack to 2R audio cable.
10. Audio input 4 connector: Audio input connector for
Audio (L+R) 4 via 3.5mm phone jack to 2R audio cable.
11. Audio output connector: Audio output connector for
Audio(L+R) via 3.5mm phone jack to 2R audio cable.
12. RS-232 interface: DB-9 female connector for connecting
to your other control console for remote control.
g
g
Command Code
"I" + "1"
PORT 1 ON
"I" + "2"
PORT 2 ON
"I" + "3"
PORT 3 ON
"I" + "4"
"P" + "1"
"P" + "0"
POWER ON
POWER OFF
Comment
PORT 4 ON
CPCD-41AR RS-232 Remote Control Protocol
* The connection between CPCD-41AR and remote controller with RS-232 modem cable.
* RS-232 transmission format:
Baud Rate : 9600 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit
* Command :
CPCD-41AR
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
T xD
R x D
NC
GND
NC
NC
NC
NC
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
R xD
T x D
NC
GND
NC
NC
NC
NC
Remote Controller
Pins definition of modem cable
Loading...