Cypress CPCD-3A Operation Manual

PC/Component

Distributor

with Audio

CPCD-3A

Operation Manual

Introduction

Cypress CPCD-3A is a high performance PC/Component distributor
with stereo audio. It is designed to connect one PC or HDTV signal source
with audio to 3 PC or HDTV displays.

Features

* Supports either PC (RGB) or HDTV (YPbPr) input signal.
* Accepts one PC or HD component input and split it into 3 buffered and
identical outputs.
* Supports stereo audio input and split it to 3 identical
outputs via 3.5mm mini-stereo connector.
* High video signal bandwidth (480MHz/-3dB) supports PC/HDTV
resolution up to UXGA/1080p.
* Ideal for presentation and home theater application.
* Plug and play, easy to install.

Operation Controls and Functions

OUTPUT

AUDIO OUTPUT INPUT

DC 5V

AUDIO

1 23

PC

CPCD-3A PC distributor up to 1080P/UXGA

PC 3/ YPbPr 3PC 2/ YPbPr 2PC 1/ YPbPr 1

5

4 3 2 1

1. Power Input: Plug the supplied 5VDC power supply into the unit
and the LED will illuminate when it is connected.

2. Video input: Connect to the video output of your source devices such as
PC or DVD player by using the HD-15 to HD-15 cable or
HD-15 to 3 RCA cable.

3. Audio input: Connect to the audio output of your source devices such as
PC or DVD player by using the 3.5mm phone jack audio cable
or 3.5mm phone jack to 2 RCA audio cable.

4. Audio outputs: Connect the audio cables from these ports to the audio input
of the speaker systems.

5. Video outputs: Connect each of the PC/HD output to the input
of the PC or HD display.