Cypress CP-291N User Manual

Download

CP-291N

PC/HD to PC/HD Scaler

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 September 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 03/06/15 Preliminary Release

CONTENTS

1. Introduction ............................................ 1

2. Applications ........................................... 1

3. Package Contents ................................ 1

4. System Requirements ............................ 1

5. Features .................................................. 1

6. Operation Controls and Functions ....... 2

6.1 Front Panel ........................................2

6.2 Rear Panel .........................................3

6.3 OSD Menu .........................................4

7. Connection Diagram ............................ 6

8. Specications ........................................ 7

8.1 Supporting Timing Chart ..................8

9. Acronyms ............................................... 9

1. INTRODUCTION

This Scaler Box is designed to upscale PC/HD input sources to PC/HD output of wide-range PC/HD resolution up to WUXGA/1080p. This unit

has a comprehensive OSD menu that allows user to select a variety of output resolutions and adjust for best picture quality. It is ideal for using between incompatible PC source and display by changing picture

resolution to match the native resolution of the HD display.

2. APPLICATIONS

• Displaying PC contents on to HD display

• Household PC signal enlargement on to HDTVs

• Lecture room/Showroom/Meeting room/Classroom signal display

3. PACKAGE CONTENTS

• 1 x PC/HD to PC/HD Scaler

• 1 x 5 V/2.6 A DC Power Adaptor

• 1 x D-Sub to D-Sub cable

• 1 x D-Sub to RCA adaptor cable

• Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipment such as PC/Laptop and output display with

PC or HD display.

5. FEATURES

• Supports full range of PC resolution from VGA ~ WUXGA (RB) and HD

resolution from 480i~1080p

• Provides output picture adjustment on contrast, brightness, hue,

saturation, sharpness, RGB (color tone) level and aspect ratio size

• Automatically detect the factory setting of the connected display

and output the corresponding resolution and refresh rate, when the NATIVE output is selected

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

PC / HD

BYPASS

1 2 3

PC/HD BYPASS: Connect to monitor or HD display to bypass the PC/HD input signal. For HD/SD signal a D-Sub to 3 RCA adaptor is

required.

PC/HD IN: Connect from the source equipment such as PC/Laptop

for signal input. For HD/SD signal a D-Sub to 3 RCA adaptor is

required.

SERVICE: This port is reserved for rmware update only.

PC / HD

SERVICE

6.2 Rear Panel

DC 5V

PC / HD

OUTPUT

1 2 3 4

Power LED: This LED will illuminate once the device is connected

PC / HD PC / HD

with power supply.

DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.

PC/HD OUTPUT: This slot is to connect with HDMI TV/Monitor for output image display. For HD/SD signal a D-Sub to 3 RCA adaptor

is required.

MENU: Press this button to enter into the OSD menu and press it again to enter into the selection.

+/- button: Press these buttons to

a. move up/down the OSD selection,

b. to adjust the value,

Under normal operation (outside of OSD selection)

c. Press "-" to do AUTO POSITION under PC mode only,

d. Press “-“ together with “MENU” to switch output resolution to

720P@60 instantly,

e. Press “+” together with “MENU” to switch output resolution to

XGA@60 (1024x768) instantly

f. Press both “+” together with “-“ to set the device back to factory

reset setting.

6.3 OSD Menu

Main Menu 1st Layer 2

CONTRAST 0~100 (50)

PICTURE SETTING

BRIGHTNESS 0~100 (50)

EXIT

HUE 0~100 (50)

SATURATION 0~100 (50)

FINETUEN

HD/SD Mode

SHARPNESS 0~100 (50)

NR OFF/LOW/MIDDLE/HIGH (OFF)

EXIT

PHASE 0~100 (100)

CLOCK 0~100 (50)

FINETUEN

PC Mode

H-POSITION 0~100 (50)

V-POSITION 0~100 (50)

EXIT

RED 0~100 (50)

GREEN 0~100 (50)

COLOR SETTING

BLUE 0~100 (50)

EXIT

Layer

Main Menu 1st Layer 2

SIZE

OUTPUT SETTING

RESOLUTION

EXIT

H-POSITION 0~100 (10)

V-POSITION 0~100 (90)

TIMER 0~100 (50)

OSD SETTING

BACKGROUND 0~100 (50)

DISPLAY INFO/ON/OFF (INFO)

EXIT

FACTORY RESET

INFORMATION

EXIT

Layer

FULL/OVERSCAN/UNDERSCAN/

LETTER BOX/ PANSCAN/ASPECT

(FULL)

640x480@60 / 800x600@60 / 1024x768@60 / 1280x1024@60 /1400X1050@60 / 1600x1200@60 / 1280X800@60 / 1440x900@60 / 1680x1050@60 /1920x1200@60RB / 1600X900 / 480P / 576P /

720P@50/ 720P@60 / 1080I@50 / 1080I@60 / 1080P@50 / 1080P@60

7. CONNECTION DIAGRAM

PC or DVD

DC 5V

PC / HD BYPASS

PC / HDINSERVICE

PC / HD PC / HD

PC / HD

OUTPUT

LCD TV or Monitor

8. SPECIFICATIONS

Input Port 1 x D-Sub 15pin

Output Ports 1x D-Sub 15pin, 1 x D-Sub 15pin (Bypass)

Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/

UL certied)

ESD Protection Human body model:

±8kV (air-gap discharge)

±6kV (contact discharge)

Dimensions (mm) 102 (W) x 147 (D) x 25(H)/Jack Excluded

102 (W) x 158.5 (D) x 25(H)/Jack

Included

Weight (g) 342

Chassis Material Aluminum

Silkscreen Color Black

Operating Temperature 0˚C~40˚C / 32˚F~104˚F

Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F

Relative Humidity 20 ~ 90% RH (non-condensing)

Power Consumption 5.3w

8.1 Supporting Timing Chart

640x480@60/72/75/85 V V@60

800x600@56/60/72/75/85 V V@60

1024x768@60/70/75/85 V V@60

1280x1024@60/75/85 V V@60

1440x1050@60 V V

1600x1200@60 V V@60

1280x800@60 V V@60

1440x900@60 V V

1600x900@60 V V

1680x1050@50/60 V V@60

1920x1200@60RB V V

480I/576I V

480P/576P V V

720P@50/60 V V

1080I@50/60 V V

INPUT OUTPUT

PC SD/HD PC SD/HD

1080P@50/60 V V

9. ACRONYMS

ACRONYM COMPLETE TERM

HDMI High-Denition Multimedia Interface

WUXGA (RB) Widescreen Ultra Extended Graphics Array

(Reduce blanking)

CYPRESS TECHNOLOGY CO., LTD

Home page: http://www.cypress.com.tw

MPM-CP291N

Cypress CP-291N User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual