Cypress CMSI-8H8HS Operation Manual
CMSI-8H8HS
8×8 HDMI Matrix
Operation Manual
Operation Manual
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 11/11/11 Preliminary Release
RDV2 13/12/11 Power Supply Change
RDV3 15/02/12 LAN Function
VS0 29/03/12 Updated format, diagrams, and
statements
RDV4 04/07/12 Control's Function
VS0 24/07/12 Telnet and Web GUI sections
updated
CONTENTS
1. Introduction ............................................ 1
2. Applications
........................................... 1
3. Package Contents
................................ 1
4. System Requirements
............................ 1
5. Features
.................................................. 2
6. Operation Controls and Functions
....... 3
6.1 Front Panel
........................................3
6.2 Rear Panel
.........................................4
6.3 Side Panel
.........................................5
6.4 Remote Control
................................ 5
6.5 RS-232 Pin Assignment
.....................6
6.6 RS-232 and Telnet Commands
.......7
6.7 Telnet Control
...................................8
7. Connection Diagram
.......................... 10
8. Specications
...................................... 11
9. Acronyms
............................................. 12
1
1. INTRODUCTION
The 8×8 HDMI Matrix supports the transmission of Video (up to 1080p
Full HD/1920×1200@60 Hz) with multichannel digital audio from up to
eight high denition sources to up to eight HDMI outputs and allowing
any source to be independently displayed on any monitor. Also, the
unit can be controlled via IR, RS-232, Telnet or the front panel button
controls.
2. APPLICATIONS
• Video/TV wall display
• Commercial advertising and display
• Lecture room display and control
• Hyper market demonstration and control
3. PACKAGE CONTENTS
• 8×8 HDMI Matrix
• 1×24 V/6.25 A DC Adaptor
• 1×Remote Control
• 1xIR Extender
• Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI equipped input source devices with HDMI cables
• HDMI equipped output displays (TVs or monitors) or HDMI equipped
AV receivers with HDMI cables
2
5. FEATURES
• HDMI, HDCP 1.1 and DVI compliant
• Supports HDMI features including 3D
• Supports audio sampling rate up to 192 kHz
• Supports resolutions VGA~WUXGA and 480i~1080p dependent upon
the output display’s EDID settings
• Supports 3D signal display dependent upon the output display's
EDID settings
• Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters
at 12-bit resolution and HDMI output up to 15 meters at 8-bit/12-bit
• Supports IR extension
• Supports RS-232, remote control, on-panel control and IP Control
(Telnet)
• 2U size design
Loading...