Cypress CM-398DI Operation Manual

Download

CM-398DI

CV/SV to DVI-I Converter

with Audio Input

Operation Manual

CM-398DI

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer ﬁle, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from Cypress Technology.

Trademark Acknowledgments

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:



Always follow basic safety precautions to reduce the risk of

ﬁre, electrical shock and injury to persons.



To prevent ﬁre or shock hazard, do not expose the unit to rain,

moisture or install this product near water.



Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.



Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.



To protect the equipment from overheating, do not block the slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

V1 20101011 Preliminary Release

Table of Contents

1 2 2 2 2 3 4 4 4 5 5 6 7 8

1. Introduction ……………………..……………………...…........….…….

2. Applications …………………..………………….……...................…..

3. Package Contents ………………………...........……….................…

4. System Requirements ……………..……….........………............…….

5. Features …………………………………………......……........…...……

6. Specications ………………………………...……..........………....….

7. Operation Controls and Functions ……………...……..............……

7.1 Left side Panel .........................................................................

7.2 Right side Panel .……………..……………..…….......…...….…

7.3 Front panel .…………………………......…..…….......…...….…

7.4 Top panel .…………………………………...…….......…...….…

8. 8. OSD ......................................…......……………..........…..…....…...

9. Connection and Installation ….………………….........…..…..…......

10. Acronyms …......................................................................................

1. Introduction

This is a low cost video to DVI-I converter box that can convert CV/SV (NTSC or PAL system) to DVI-I resolutions of XGA to UXGA or HD resolutions of 480p to 1080p. With frame rate conversion feature that allows users to view DVD, VCR or video game sources on a DVI monitor this device also has an On-Screen Display function that allows users to easily select the output resolution.

2. Applications



CV/SV signal with audio to display on DVI monitor



STB/Camcorder signal display on DVI monitor



VCR signal display on DVI monitor

3. Package Contents



CV/SV to DVI Converter



Power Adaptor



Operation Manual

4. System Requirements

Input source equipments such as DVD/Video cassette player and output DVI monitor with connection cables.

5. Features



Operates in NTSC 3.58 and PAL system



High Quality Scaling Engine



Output resolution:



■

PC resolutions: XGA, SXGA, UXGA



■

DVI resolutions: 480p/576p, 720p,1080p



3D (frame based) motion adaptive YNR/CNR noise reduction (for Y/C

video input)



On-Screen Display



Advance 3D motion adaptive de-interlace



Automatic 2:2 & 3:2 ﬁlm mode detection



Play video games on your HD monitor/TV



High-resolution output picture



Plug & play- no drive software required

6. Specications

Input port 1 x CV, 1 x SV Output port 1 x DVI Output Resolution PC: XGA/SXGA/UXGA

HD: 480p/576p/720p/1080p

Power Supply 5VDC/1A (US/EU standards,

CE/FCC/UL certiﬁed)

ESD Protection Human body model:

8kV (air-gap discharge)

4kV (contact discharge) Dimensions (mm) 162.6(W) x 164.5(D) x 33.5(H) Weight(g) 100 Chassis Material Plastic Silkscreen Color Black Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F Relative Humidity 20~90% RH (no condensation) Power Consumption (W) ??(Max)

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.1 Left side Panel

① ② ③

SVideo

DC 5V

①

S-Video input: This slot is where you connect the input source equipment such as digital camcorder or PDAs with S-Video cable for input signal sending.

②

Composite (CV) input: This slot is where you connect the input source equipment such as personal media player or personal recorder with CV cable for input signal sending.

③

DC 5V In: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.

7.2 Right side Panel

①

DVI-I

Out

①

DVI-I OUT: This slot is where you connect the output display monitor/TV with DVI cable.

7.3 Front Panel

①

Mode

①

PC/HD switch: This dip switch allows you to select PC or component HD timing output. Simply slide the dip switch to left or right and the output mode will display your desire selection.

7.4 Top Panel

①

CV:Yellow SV:Red

CVBS+SV  DVI-I

①

CV/SV SW & LED: Press this button to switch input source between composite or S-Video. The Led will illuminate in yellow when switch to composite input and red when switch to S-Video input.

8. OSD

←

IN / OUT

←

F / W

←

PC Monitor

1. Press the top panel’s button once to switch in between CV/SV. If input source is disconnected the OSD will show “No Signal”.

2. Press the top panel’s button for 3 second to bring up OSD manual.

3. When the device is under PC mode the OSD will display input format and output timing, source detection, PC monitor’s EDID and ﬁrmware version as to above picture.

4. When the device is under HD mode the OSD will display input format and output timing, frame rate conversion selection, video system and ﬁrmware version as show in below picture.

←

IN / OUT

←

F / W