Cypress CP-259H, CP-255I, CP-255H, CP-255D, CM-394 Operation Manual
...
1
CV/SV/PC/HD/HDMI
1080p Scaler Box
CP-255I
Operation Manual
2
TABLE OF CONTENTS
1. Introduction
..........................................................................................
2. Features
................................................................................................
3. Package Contents
..............................................................................
4. Operation Controls and Functions
....................................................
4.1 Front Panel.....................................................................................
4.2 Rear Panel.....................................................................................
4.3 OSD Operation..............................................................................
4.4 Remote Control.............................................................................
5. CP-255I RS-232 Remote Control Protocol
.........................................
6. Specications
.......................................................................................
6.1 General Specification..................................................................
6.2 Support Resolution........................................................................
7. Connection and Installation
..............................................................
1
1
1
2
2
2
4
5
6
9
9
9
10
1
1. Introduction
Cypress's CP-255I Scaler Box
is designed to upscale digital/analog
video signal from Composite, S-Video, PC, Component (HD) and HDMI input
sources, to digital HDMI output of wide-range HDTV and PC resolutions, up
to 1080p and WUXGA (1920 x 1200.) Besides video upscaling, the scaler
box also converts digital/analog audio signal to digital format, then output
either through HDMI combining with the video, or Coaxial S/PDIF separately.
Cypress CP-255I has a comprehensive OSD menu that allows user to select a
variety of output resolutions and adjust for best picture quality.
2. Features
1. HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.
2. Scales any PC (VGA ~ WUXGA) /HD (480i ~ 1080p) resolutions to/from
another PC/HD resolutions.
3. Automatically detect the factory setting of the connected display and
output the corresponding resolution and refresh rate, when the NATIVE
output is selected.
4. Supports 50/60Hz frame rate conversion.
5. Supports 3-D motion video adaptive, 3-D de-interlacing, and 3:2 / 2:2 pull down detection and recovery.
6. Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level, and aspect ratio size.
7. Supports high resolution input/output:
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA
HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, and 1080p
8. Supports digital and analog audio input and output.
3. Package Contents
1. Cypress CP-255I Scaler Box
2. D-Sub (15pin) Cable
3. 3XRCA Cable (Composite Video + L/R Audio)
4. Remote Controller
5. 5VDC Power Supply Adaptor
6. Operation Manual
2
4. Operation Controls and Functions
4.1. Front Panel
1. POWER Button and LED Indicator:
Press the button to turn ON/OFF the power of the unit. The LED will
illuminate when the power is turned on.
2. IR remote control sensor.
3. Input Selection Buttons and LED Indicators:
Press each of the buttons (CV/SV/COMP/PC/HDMI) to select the
desired input source. The LED will illuminate when the corresponding
input is selected.
4. MENU Button:
Press the MENU button to bring up OSD operation menu (see section
“
4.3 OSD Operation” for reference.)
5. +/- Buttons:
a. On the first tier of OSD menu, use + and - buttons to move up/down
the highlight item for selection.
b. Once the desired option is selected, use + and - buttons to toggle
between setting values.
6. ENTER Button:
In OSD menu, use the ENTER button to confirm the selection.
4.2. Rear Panel
Loading...