CLUX-C41C
CLUX-C41C
4x1 HDMI
v1.3 Switcher
Operation Manual
1. Introduction................................................................................
2. Features......................................................................................
3. Operation Controls and Functions..........................................
3.1 Front Panel...........................................................................
3.2 Rear Panel............................................................................
4. Remote Control..........................................................................
5. Connection and Installation.....................................................
6. Specifications............................................................................
7. Cypress HDMI v1.3 Series........................................................
TABLE OF CONTENTS
1
1
2
2
3
4
4
5
6
1. Introduction
This is a high performance HDMI switcher with 4 separate digital audio inputs
and 1 output. It provides for various HDMI sources to share one HDTV display
with CEC control fonctions. Simply press one button to select your desired HDMI
source for display on the HDTV.
2. Features
HDMI 1.3 and HDCP 1.1 compliant.
Supports 30/36/48 bit color depth display.
Supports high definition audio – Dolby Digital True HD® and DTS-HD®.
Signal Enhancement feature allows you to improve signal quality for long
cable lengths.
HDMI cable distance test with 1080p/8 bit resolution, the input/output
source can run up to 10/15 meters. If 1080p/12 bit the input/output source
can run up to 6/15 meters.
PC: VGA, SVGA, XGA, SXGA, and UXGA (1600 x 1200) and
HD: 480i ~1080p 50/60, 1080p 24
Remote control.
Supports RS232 operation.
Supports CEC control fonctions.
1 2
3. Operation Controls and Functions
3.1 Front Panel
①
②
③
④
2
3. Operation Controls and Functions
3.1 Front Panel
①
Remote control sensor.
②
Input select/Indicators: Press the “INPUT” button repeatedly to switch to
your desired input source and the LED will illuminate to indicate which input
source is selected.
③
CEC button/Indicator: When the LED illuminate it means CEC is ON and both
input source and output display must support CEC function in order to
perform CEC rightly. Press again to switch CEC to byp0ass mode and the LED
will not illuminate which means the CEC function will be terminate.
④
POWER Switch/Indicator: When the power supply connected to the device,
the device will automatically turns on and the red power LED will illuminate.
Press the "POWER" button from remote control to turn on or se the device on
standby mode.
1 2
3
4
1 2 3 4
CLUX-C41C
4x1 HDMI v1.3 Switcher with CEC
INPUT
CEC
ON/Bypass POWER
3
3.2 Rear Panel
①
HDMI output: Connect the HDMI output of the unit to the HDMI input of
your display with HDMI cable.
②
HDMI Inputs: Connect each of the input ports to the HDMI or DVI output
of your source equipment such as DVD player or set-top-box.
③
Power: Connect the 5V DC power adaptor into this unit and plug the
adaptor to AC wall outlet.
④
RS-232 input: Connect with D-Sub 9 pin cable with PC for firmware
upgrading and system control.
1 4 2 3
RS-232
DC 5V
OUTPUT
INPUT
4 3 2 1
4
4. Remote Control
5. Connection and Installation
1. Power: Press the button to turn on/off the unit.
2. CEC: Press the button to turn on /off the CEC function.
3. Direct input selector: Press 1, 2, 3 or 4 to select the
desired input source.
12
3
30
O
7M
30
O
LCD TV
DVD 3 STBDVD 2DVD 1
5
-Frequency bandwidth
-Input ports
-Output ports
-Power Supply
-Weight(g)
-Dimension(mm)
-Chassis Material
-Silk Skin Color
-Operating Temperature
-Power Consumption
2.25Gbps(single link)
4 x HDMI female ports (Type A connector)
1 x RS232
1 x HDMI female port (single link).
5V/1A
760
204(W) x 104(D) x 44(H)
Metal
Black
Operating from 0°C ~ 40°C
3.3W
6. Specifications
Loading...